106676-2090 ZEXEL 9 400 617 429 BOSCH INJECTION-PUMP ASSEMBLY 9400617429 1066762090 me158615

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 400 617 429 9400617429

ZEXEL 106676-2090 1066762090

MITSUBISHI ME158615 me158615

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106676-2090 zexel genuine, new aftermarket engine parts with delivery

Service parts 106676-2090 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-0391

3. GOVERNOR 105407-7090

4. SUPPLY PUMP 105207-1200

5. AUTOM. ADVANCE MECHANIS 105681-4390

6. COUPLING PLATE 105663-0910

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-7110

11. Nozzle and Holder ME056473

12. Open Pre:MPa(Kqf/cm2) 17.7{180}/21.6{220}

13. NOZZLE-HOLDER 105031-4530

14. NOZZLE

105015-6150

15. NOZZLE SET

Include in #1:

106676-2090 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 617 429 9400617429

ZEXEL 106676-2090 1066762090

MITSUBISHI ME158615 me158615

Zexel num

Bosch num

Firm num

Name

106676-2090

9 400 617 429

ME158615 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D24T K 14CA INJECTION PUMP ASSY PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-4620

Overflow valve opening pressure kPa 225 225 225

Overflow valve opening pressure kgf/cm2 2.6 2.6 2.6

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-5-3-6- 2-4

Pre-stroke mm 4.8 4.75 4.85

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.5

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 124.5 121.5 127.5

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point D

Rack position 7.5+-0.5

Pump speed r/min 550 550 550

Average injection quantity mm3/st. 66.5 63.9 69.1

Fixing the rack *

Injection quantity adjustment_03

Adjusting point E

Rack position 5.9+-0.5

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 16 13.4 18.6

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Injection quantity adjustment_04

Adjusting point F

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 140 130 150

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min 750--

Advance angle deg. 0 0 0

Load 0/4

Remarks
Start

Timer adjustment_02

Pump speed r/min -

Advance angle deg. 2.5 2 3

Load 0/4

Timer adjustment_03

Pump speed r/min 600

Advance angle deg. -0.5

Load 0/4

Timer adjustment_04

Pump speed r/min 700

Advance angle deg. -0.5

Load 0/4

Timer adjustment_05

Pump speed r/min 300

Load 4/4

Remarks
Measure the actual advance angle (beginning of advance).

Timer adjustment_06

Pump speed r/min 900

Advance angle deg. 1.5 1.5 2.5

Load 4/4

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Set at delivery (5)Rack difference from N = N1 (6)Rack difference between N = N2 and N = N3 (7)Set idle sub-spring
----------
K=13 N1=1000r/min N2=1000r/min N3=500r/min
----------

Speed control lever angle

F:Full speed I:Idle (1)Set at delivery (2)Stopper bolt setting
----------

----------
a=(21deg)+-5deg b=(10deg)+-5deg c=(27deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)No return spring
----------

----------
a=48.5deg+-5deg b=53deg+-5deg

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(5deg)

Information:

Information Release Memo REM03-28
Reman
September 2003 REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS Announcement The Caterpillar Remanufactured Products Group announces the expansion of the remanufactured injector product line to include additional coverage for various 3126B, 3126E C10, C12, 3176, and 3196 Industrial, Machine, Marine and On-Highway Truck applications. Coverage The addition of these injectors provides dealers with an additional repair option to support various 3126B, 3126E, C10, C12, 3176, and 3196 Industrial, Machine and On-Highway Truck applications. Coverage is extensive so please consult your NPR or Reman Cross Reference for exact model coverage. Features And Benefits Cat? Remanufactured injectors offer excellent value to customers. Customers who want fast repair turn-around, superior quality and reliability, and lower repair costs will benefit from the use of these Remanufactured injectors. Cat Remanufactured injectors provide immediate, off-the-shelf availability at a fraction of the new price. Features
All critical engineering changes and updates included
Worldwide availability through Caterpillar? parts distribution system
Backed by Cat warrantyBenefits
Improved reliability and performance
Customer access regardless of location
Consistent supportCore Acceptance Core Acceptance Criteria for Caterpillar Remanufactured injectors is simple, visual, and requires no special tools. Full core credit is issued when the core is complete, fully assembled, and has an acceptable part number. Consult your Core Acceptance Guide for complete details.Warranty Please consult the appropriate warranty statement for your area.Core Management Please refer to the Caterpillar Core Management Information System (CMIS 2) Parts Information application describing all reman part/CAF and related information. Also refer to other CMIS 2 inquiry applications such as Customer Profiles, Inspection Reason Codes, Inspection Line Inquiry, Add Charge Information, Entitlement Activity, Entitlement Inquiry, CCR Inquiry, CCR Entry, Shipment Processing; Process Packaging Grief; and Reporting to properly manage core returns and monitor inspection performance. This information will be available to all dealers worldwide after your CMIS 2 conversion date. In the meantime, please continue to use the current CMIS Entitlement Parts Inquiry Screen describing the list of parts in a Core Acceptability Family (CAF) and related part number detail.For the latest updates of Reman Policies and Core Management (SELD0122), Core Management Systems & Operations Procedures (SELD0040), and Shipping Instructions (SELD0039), go to the Reman Dealer website https://reman.cat.com If you have any questions regarding core return processing, feel free to call Corinth toll free at (800) 537-2928. For assistance with technical questions, call the Peoria Reman Customer Satisfaction Hot Line also toll free at (888) 88-REMAN or use our E-mail address--Reman_Help.
PELJ0234 CATERPILLAR? ?2003 Caterpillar