Buy 106675-4510 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066754510 6152721260

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 106675-4510 1066754510

KOMATSU 6152721260 6152721260

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106675-4510 zexel genuine, new aftermarket engine parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Lingmhy Fuel Injection Pump, Model: 106675-4510 (6152-72-1260). Adapted to Engine SAA6D125E-2

$3,847.68

10 Jan 2025
0.1102[0.05] pounds
CN: haofenghesiyaha

Lingmhy Fuel Injection Pump, Model: 106675-4510 (6152-72-1260). Adapted to Engine SAA6D125E-2
Lingmhy Fuel injection pump, model: 106675-4510 (6152-72-1260). Adapted to engine SAA6D125E-2

$4,232.45

30 Sep 2024
0.1102[0.05] pounds
CN: ZXJYBHD

Fuel injection pump, model: 106675-4510 (6152-72-1260). Adapted to engine SAA6D125E-2
Xwency Fuel injection pump, model: 106675-4510 (6152-72-1260). Adapted to engine SAA6D125E-2

$4,184.35

30 Sep 2024
0.1102[0.05] pounds
CN: guangzhouyaoruoshang

Fuel injection pump, model: 106675-4510 (6152-72-1260). Adapted to engine SAA6D125E-2
SouiiwbP Fuel injection pump, model: 106675-4510 (6152-72-1260). Adapted to engine SAA6D125E-2

Service parts 106675-4510 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106067-0381

3. GOVERNOR 105407-5532

4. SUPPLY PUMP

105217-6030

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156637-2820

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105111-4540

11. Nozzle and Holder 6152-12-3100

12. Open Pre:MPa(Kqf/cm2) 27.5{280}

13. NOZZLE-HOLDER 105041-7130

14. NOZZLE

105025-0120

15. NOZZLE SET

Include in #1:

106675-4510 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106675-4510 1066754510

KOMATSU 6152721260 6152721260

Zexel num

Bosch num

Firm num

Name

106675-4510
106675-4511

6152721260 KOMATSU

INJECTION-PUMP ASSEMBLY
SA6D125 * K 14CA PE6P,6PD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve 131424-1520

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.8 3.75 3.85

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 9.5

Pump speed r/min 975 975 975

Average injection quantity mm3/st. 177.5 173.5 181.5

Max. variation between cylinders % 0 -3 3

Basic *

Fixing the lever *

Boost pressure kPa 64 64

Boost pressure mmHg 480 480

Injection quantity adjustment_02

Adjusting point C

Rack position 5.6+-0.5

Pump speed r/min 460 460 460

Average injection quantity mm3/st. 18.5 17 20

Max. variation between cylinders % 0 -15 15

Fixing the rack *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_03

Adjusting point E

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 165 155 175

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 600 600 600

Rack position R1-1.45

Boost pressure kPa 14.7 12 17.4

Boost pressure mmHg 110 90 130

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Rack position R1(9.5)

Boost pressure kPa 50.7 44 57.4

Boost pressure mmHg 380 330 430

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL (5)Rack difference between N = N1 and N = N2
----------
K=9 BCL=1.45+-0.1mm N1=975r/min N2=230r/min
----------

Speed control lever angle

F:Full speed I:Idle S:Stop
----------

----------
a=35deg+-3deg b=19deg+-5deg c=2deg+-5deg

Timing setting

(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(150deg)

Information:

Illustration 1 g01068766
Inlet fuel line (fuel transfer pump to cylinder head) (1) Connector (2) Hose assembly (3) Fuel transfer pump
Remove connector (1) and hose assembly (2) from the fuel transfer pump (3). Refer to Illustration 1. Retain these parts for the reinstallation.
Illustration 2 g01068729
Outlet fuel line (fuel transfer pump to secondary fuel filter) (4) Adapter (5) Tee (6) Elbow (7) Hose assembly
Remove adapter (4), tee (5), elbow (6), and hose assembly (7) from the fuel transfer pump (3). Refer to Illustration 2. Retain these parts for the reinstallation.Note: Modifications to the tools may need to be made in order to reduce interference with engine components. Refer to Illustration 3.
Illustration 3 g01007381
Modified 2P-5494 crowfoot wrench
Illustration 4 g01068745
(3) Fuel transfer pump (8) Bolt (9) Bolt (10) Washer (11) Adapter (15) HEUI pump (21) Clip
Remove the bolt (8) and the clip (21) from the top of the fuel transfer pump. Refer to Illustration 4.
Remove the bolt (9) and the washer (10) from the bottom of the fuel transfer pump (3). Refer to Illustration 4.
Remove fuel transfer pump (3). Refer to Illustration 4.
Illustration 5 g01068776
(12) 45 ° adapter (13) Hose assembly (14) Straight connector (15) HEUI pump
Remove hose assembly (13) from 45 degree adapter (12) and straight connector (14) by using removal tool (A). Refer to Illustration 5.
Remove 45 degree adapter (12) from the HEUI pump (15). Remove straight adapter (14) from the cylinder head. Discard the parts. Refer to Illustration 5.Installation of the Engine Oil Lines Group
Illustration 6 g01068779
(16) 247-3755 Tube As (17) 6V-8636 Connector (18) 221-3494 O-Ring Seal (19) 214-7568 O-Ring Seal (20) 6V-8724 Elbow
Apply a light coat of oil to the O-rings (18) and (19) during installation. Install the O-ring (18) on