106672-3554 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066723554 220007191a


 

Information injection-pump assembly

ZEXEL 106672-3554 1066723554
HINO 220007191A 220007191a
106672-3554 INJECTION-PUMP ASSEMBLY
Rating:
31
Buy INJECTION-PUMP ASSEMBLY 106672-3554 zexel genuine, new aftermarket engine parts with delivery

Service parts 106672-3554 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-5974
3. GOVERNOR 105489-2362
4. SUPPLY PUMP 105237-1960
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105664-0740
7. COUPLING PLATE 156638-1220
9. _
10. NOZZLE AND HOLDER ASSY 105101-7191
11. Nozzle and Holder 23600-2260A
12. Open Pre:MPa(Kqf/cm2) 16.7{170}/23.5{240}
13. NOZZLE-HOLDER 105031-7251
14. NOZZLE
15. NOZZLE SET 105019-0000

Include in #1:

106672-3554 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106672-3554 
106672-3555 
 
220007191A  HINO
INJECTION-PUMP ASSEMBLY
K13C-TD * K 14CJ TICS HD-TI6M TICS




Information:

Cooling System
The centrifugal-type water pump mounts on the front cover and is belt driven by the crankshaft pulley. The pump has two outlets. Coolant from the outlet on the right side of the pump flows through a passage in the front cover to the left bank of the engine, and coolant from the outlet on the left flows to the right bank.The coolant circulates through the block to the cylinder head. Coolant flows from the heads through connecting sleeves to the return manifold in the front cover. Orifices in the sleeves control the flow from the heads.Part of the coolant to the left bank is diverted from the block to the oil cooler. External lines direct coolant from the block to the cooler and back to the return manifold in the front cover.An internal passage in the front cover directs the coolant from the return manifold to the water pump inlet. If the thermostats are closed the coolant flows to the pump and is recirculated through the engine. If they are open, coolant flows from the return manifold to the radiator and from there to the pump.The radiator is constructed with a top tank above the core and an expansion tank either above or separate from the top tank. A vent tube connects the radiator top tank and the expansion tank. The expansion tank has a shunt line which connects to the water pump inlet. This shunt system maintains a positive, static head of coolant at the pump inlet to prevent cavitation under all operating conditions. When filling the cooling system, coolant from the expansion tank flows through the shunt line to the water pump inlet and fills the engine block from the bottom. By filling the system from the bottom, air in the system is forced out through the top tank, through the vent tube into the expansion tank.The two thermostats are located at the inlet to the water pump. The inlet-regulated cooling system maintains positive coolant temperature control with decreased engine warm up time.When the thermostats are closed, coolant is circulated through the block and heads and back to the water pump by way of an internal passage in the front cover. When the thermostats are open, the bypass flow is restricted and the engine coolant flows through the radiator and returns through the inlet elbow to the water pump. Without the thermostats installed, the coolant will continually bypass the radiator, and overheating will result.Electrical System
The electrical system is a combination of three separate electric circuits: the charging circuit, the starting circuit and the lighting or load circuit. Each circuit is dependent on some of the same components. The battery (batteries), disconnect switch, circuit breaker, ammeter, cables and wires from the battery are common in each of the circuits.The charging circuit is in operation when the engine is operating. The electricity producing (charging) unit is an alternator. A regulator in the circuit senses the state of charge in the battery and regulates the electrical output to

Have questions with 106672-3554?





Group cross 106672-3554 ZEXEL

Hino 

 
220006890A 
INJECTION-PUMP ASSEMBLY
K13C-TD
 
220006891A 
INJECTION-PUMP ASSEMBLY
K13C-TD
 
220007190A 
INJECTION-PUMP ASSEMBLY
K13C-TD
 
220007190B 
INJECTION-PUMP ASSEMBLY
K13C-TD
106672-3554  

106672-3555 
 
220007191A 
INJECTION-PUMP ASSEMBLY
K13C-TD
F 01G 09U 083 
 
INJECTION-PUMP ASSEMBLY

Hino 

F 01G 09U 084 
220007192A 
INJECTION-PUMP ASSEMBLY
K13C-TD
9 400 617 097 
220007193A 
INJECTION-PUMP ASSEMBLY
K13C-TD
Back to top