106671-7471 ZEXEL 9 400 616 939 BOSCH INJECTION-PUMP ASSEMBLY 9400616939 1066717471 me056601


 

Information injection-pump assembly

BOSCH 9 400 616 939 9400616939
ZEXEL 106671-7471 1066717471
MITSUBISHI ME056601 me056601
106671-7471 INJECTION-PUMP ASSEMBLY
Rating:
36
Buy INJECTION-PUMP ASSEMBLY 106671-7471 zexel genuine, new aftermarket engine parts with delivery

Service parts 106671-7471 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-7660
3. GOVERNOR 105487-3181
4. SUPPLY PUMP 105207-1041
5. AUTOM. ADVANCE MECHANIS 105691-0100
6. COUPLING PLATE 105662-0860
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

106671-7471 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106671-7471 
9 400 616 939 
ME056601  MITSUBISHI
INJECTION-PUMP ASSEMBLY
6D22T2 K




Information:


If equipped with an air inlet heater (AIH) for cold weather starting, do not use types of starting aids such as ether. Such use could result in an explosion and injury.
When starting the engine with ether, follow these starting procedure instructions carefully. Use ether sparingly and spray it ONLY WHILE CRANKING THE ENGINE. Excessive ether use can cause piston and ring damage. Ether should be used only for cold weather starting.
Table 1
Medium and Heavy-Duty On-Highway Engines (1)
Cold Weather Recommendations    
Starting Aids    
Expected Coldest Temperature     Ether Injection (2)
OR
Air Inlet Heater     Cylinder Block Coolant Heater     Larger Battery
Larger Alternator    
Above
−7 °C (19 °F)     Available     Available     Available    
−7 °C (19 °F) to
−18 °C (0 °F)     Available     Available     Available    
−18 °C (0 °F) to
−28 °C (−18 °F)     Recommended     Required     Recommended    
−28 °C (−18 °F) to
−40 °C (−40 °F)     Recommended     Required     Required    
Less than
−40 °C (−40 °F)     Required     Required     Required    
( 1 ) Options may not be available for all models.
( 2 ) If the engine is equipped with an air inlet heater (AIH) for cold weather starting, do not use types of starting aids such as ether. Such use could result in an explosion and injury.
Table 2
Medium and Heavy-Duty On-Highway Engines (1)
Cold Weather Recommendations    
Improvements for Engine Warm-Up
Improvements for Idle Temperature    
Expected Coldest Temperature     Hand Throttles     Winter Fronts
Shutters     Air Cleaners
Located Under the Hood     On/Off
Fan Drives     BrakeSavers
Exhaust Restrictors    
Above
−7 °C (19 °F)     Available     Available     Available     Available     Available    
−7 °C (19 °F) to
−18 °C (0 °F)     Available     Recommended     Recommended     Recommended     Available    
−18 °C (0 °F) to
−28 °C (−18 °F)     Recommended     Required     Recommended     Required     Recommended    
−28 °C (−18 °F) to
−40 °C (−40 °F)     Required     Required     Recommended     Required     Recommended    
Less than
−40 °C (−40 °F)     Required     Required     Recommended     Required     Required    
( 1 ) Options may not be available for all models.

Have questions with 106671-7471?





Group cross 106671-7471 ZEXEL

Mitsubishi 

 
ME056610 
INJECTION-PUMP ASSEMBLY
6D22
9 400 616 935 
ME056611 
INJECTION-PUMP ASSEMBLY
6D22
9 400 616 936 
ME056612 
INJECTION-PUMP ASSEMBLY
6D22
9 400 616 937 
ME056613 
INJECTION-PUMP ASSEMBLY
6D22
 
ME056614 
INJECTION-PUMP ASSEMBLY
6D22
 
ME056599 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 616 938 
ME056596 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
106671-7471  
9 400 616 939 
ME056601 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
9 400 616 940 
ME056602 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
 
ME056605 
INJECTION-PUMP ASSEMBLY
6D22T2
Back to top