106671-4591 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066714591 3626543180


 

Information injection-pump assembly

ZEXEL 106671-4591 1066714591
MITSUBISHI-HEAV 3626543180 3626543180
106671-4591 INJECTION-PUMP ASSEMBLY
Rating:
12
Buy INJECTION-PUMP ASSEMBLY 106671-4591 zexel genuine, new aftermarket engine parts with delivery

Service parts 106671-4591 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106061-5511
3. GOVERNOR 105407-4280
4. SUPPLY PUMP 105207-1370
5. AUTOM. ADVANCE MECHANIS 105681-0231
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-5171
11. Nozzle and Holder 36261-11070
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4441
14. NOZZLE 105015-4350
15. NOZZLE SET

Include in #1:

106671-4591 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106671-4591 
106671-4592 
 
3626543180  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6BF * K




Information:

Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Keep all exhaust manifold and turbocharger shields in place to protect hot exhaust from oil spray in the event of a line, tube or seal failure.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes.Wash hands after touching batteries and connectors. Use of gloves is recommended.Batteries give off flammable fumes which can explode. Ensure there is proper ventilation for batteries which are located in an enclosure.Always thaw a frozen battery before jump starting. Frozen batteries can explode.Do not smoke when observing battery electrolyte levels.Always wear protective glasses when working with batteries.Never disconnect any charging unit circuit or battery circuit cable from the battery when charging unit is operating. A spark can cause the flammable vapor mixture of hydrogen and oxygen to explode.Fire or Explosion Prevention
Fire may result from lubricating oil or fuel sprayed on hot surfaces causing personal injury and property damage. Inspect all lines and tubes for wear or deterioration. They must be routed, supported or clamped securely. Tighten all connections to the recommended torque. Leaks can cause fires.Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices (i.e. air inlet shutoff) suitable for the application involved.All fuels, most lubricants and some coolant mixtures are flammable.Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes is extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Batteries give off flammable fumes which can explode.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the engine.Do not expose the engine to flames, burning brush, etc., if at all possible.Shields (if equipped), which protect hot exhaust components from oil or fuel spray in the event of a line, tube or seal failure, must be installed correctly.Provide adequate and proper waste oil disposal. Oil and fuel filters must be properly installed and housing covers tightened to proper torque when being changed.Batteries must be kept clean, covers kept on all cells, recommended cables and connections used and battery box covers kept in place when operating.When starting from an external source, always connect the positive (+) jumper cable to the POSITIVE (+) terminal of the

Have questions with 106671-4591?





Group cross 106671-4591 ZEXEL

Mitsubishi-Heav 

 
3256560160 
INJECTION-PUMP ASSEMBLY
S6A2
 
3256560161 
INJECTION-PUMP ASSEMBLY
S6A2
 
3256570160 
INJECTION-PUMP ASSEMBLY
S6A2
 
3256580160 
INJECTION-PUMP ASSEMBLY
S6A2
9 400 616 809 
3256590160 
INJECTION-PUMP ASSEMBLY
S6A2
 
3266502160 
INJECTION-PUMP ASSEMBLY
S12A
F 019 Z10 521 
3266512160 
INJECTION-PUMP ASSEMBLY
S12A
F 019 Z10 522 
3266522160 
INJECTION-PUMP ASSEMBLY
S12A
F 019 Z10 523 
3266532160 
INJECTION-PUMP ASSEMBLY
S12A
9 400 616 810 
3266542160 
INJECTION-PUMP ASSEMBLY
S12A
 
3626503280 
INJECTION-PUMP ASSEMBLY
S6B
9 400 619 858 
3626503281 
INJECTION-PUMP ASSEMBLY
S6B
F 019 Z10 626 
3626513280 
INJECTION-PUMP ASSEMBLY
S6B
F 019 Z10 627 
3626523280 
INJECTION-PUMP ASSEMBLY
S6B
9 400 616 811 
3626533280 
INJECTION-PUMP ASSEMBLY
S6B

Niigata-Urawa 

 
75G47000A 
INJECTION-PUMP ASSEMBLY
6NSF
 
 
INJECTION-PUMP ASSEMBLY

Niigata-Urawa 

 
75G47001B 
INJECTION-PUMP ASSEMBLY
6NSF
9 400 619 859 
75G47001C 
INJECTION-PUMP ASSEMBLY
6NSF

Niigata-Tekkou 

9 400 616 812 
75G47001E 
INJECTION-PUMP ASSEMBLY
6NSF
F 01G 09U 0JJ 
75G47001 
INJECTION-PUMP ASSEMBLY
6NSF
F 01G 09U 0JJ 
75G47001 

6NSF

Mitsubishi-Heav 

 
3626530160 
INJECTION-PUMP ASSEMBLY
S6B
 
3626530161 
INJECTION-PUMP ASSEMBLY
S6B

Komatsu 

9 400 616 813 
6151711380 
INJECTION-PUMP ASSEMBLY
S6D125
9 400 616 814 
6152711340 
INJECTION-PUMP ASSEMBLY
SA6D125
9 400 616 815 
6152711371 
INJECTION-PUMP ASSEMBLY
SA6D125
 
6152711321 
INJECTION-PUMP ASSEMBLY
SA6D125

Mitsubishi-Heav 

 
3626533180 
INJECTION-PUMP ASSEMBLY
S6BF
106671-4591  

106671-4592 
 
3626543180 
INJECTION-PUMP ASSEMBLY
S6BF
 
3626553180 
INJECTION-PUMP ASSEMBLY
S6BF
9 400 613 206 
3626563180 
INJECTION-PUMP ASSEMBLY
S6BF
Back to top