106671-4093 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1066714093 6152711610


 

Information injection-pump assembly

ZEXEL 106671-4093 1066714093
KOMATSU 6152711610 6152711610
106671-4093 INJECTION-PUMP ASSEMBLY
Rating:
66
Buy INJECTION-PUMP ASSEMBLY 106671-4093 zexel genuine, new aftermarket engine parts with delivery

Service parts 106671-4093 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106060-5201
3. GOVERNOR 105407-2801
4. SUPPLY PUMP 105217-1490
5. AUTOM. ADVANCE MECHANIS 105635-0140
6. COUPLING PLATE 105663-0400
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105111-4070
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 24.5(250)
13. NOZZLE-HOLDER 105041-7040
14. NOZZLE 105015-5960
15. NOZZLE SET

Include in #1:

106671-4093 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106671-4093 
 
6152711610  KOMATSU
INJECTION-PUMP ASSEMBLY
SA6D125 * K




Information:

Your truck/engine may not have the same or all of the gauges as shown in the illustrations. The illustrations shown are of typical gauges.Gauges provide a "look" inside the engine. Be sure they are in good working order. You can determine what is the "normal" operating range by observing your gauges over a period of time.Noticeable changes in gauge readings are an indication of potential gauge or engine problems. This also applies to gauge readings that have changed significantly but are still within specifications. The cause of any sudden or significant change in the readings should be determined and corrected. Contact your Caterpillar dealer for assistance as needed.
If no oil pressure is indicated, stop the engine. Engine damage can result.
Oil Pressure - Typical oil pressure range is 30 and 45 psi (207 and 310 kPa) (running at rated engine speed, with SAE 15W-40 oil, at operating temperature). A lower pressure is normal at low idle. Water Temperature - Typical water temperature range is 189° to 208°F (87° to 98°C). Maximum allowable temperature is 216°F (102°C) with the cooling system pressurized. Somewhat higher temperatures may occur under certain conditions. Ammeter - Indicates the amount of charge or discharge in the battery charging circuit. Typical operation of the indicator should be slightly to the positive (right) side of "0" (zero).With the engine running, during normal operation, if the indicator is constantly to the negative (left) side of "0" (zero) or shows excessive charge, have the charging system checked for malfunction.
Do not exceed 2300 rpm in any situation.
Tachometer - Indicates engine rpm (speed). The engine can be operated at high idle without damage, but should not be allowed to overspeed. Overspeeding when downshifting, going downhill, etc., can result in serious damage to your engine. Fuel Level - Indicates fuel level in the fuel tank. Electrically operated, it registers only when the key switch is ON.
A drop in fuel pressure usually indicates a dirty or plugged fuel filter.
Fuel Pressure - Indicates fuel pressure to the unit injectors. The indicator (if equipped) should register in the NORMAL (green) range. Typical fuel pressure at low idle is 60 psi (410 kPa) and at TEL (Top Engine Limit), 80 psi (550 kPa).

Have questions with 106671-4093?





Group cross 106671-4093 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
6150Z
 
 
INJECTION-PUMP ASSEMBLY
6130

Niigata-Urawa 

9 400 611 138 
W2B47010B 
INJECTION-PUMP ASSEMBLY
6NSA
 
W2B47011B 
INJECTION-PUMP ASSEMBLY
6NSA
 
W2B47011C 
INJECTION-PUMP ASSEMBLY
6NSA
 
 
INJECTION-PUMP ASSEMBLY

Niigata-Urawa 

9 400 616 789 
W2B47011E 
INJECTION-PUMP ASSEMBLY
6NSAM
 
43547080A 
INJECTION-PUMP ASSEMBLY
DMF13S
 
43547080B 
INJECTION-PUMP ASSEMBLY
DMF13S
 
43547080C 
INJECTION-PUMP ASSEMBLY
DMF13S
9 400 616 790 
43547080D 
INJECTION-PUMP ASSEMBLY
DMF13S

Komatsu 

 
 
INJECTION-PUMP ASSEMBLY
SA6D125
F 019 Z10 041 
6152711171 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY
SA6D125
 
6152711180 
INJECTION-PUMP ASSEMBLY
SA6D125
 
 
INJECTION-PUMP ASSEMBLY
SA6D125

Daihatsu 

 
H290123020C 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

 
6152711111 
INJECTION-PUMP ASSEMBLY
SA6D125

Niigata-Urawa 

 
W2B47120A 
INJECTION-PUMP ASSEMBLY
6NSA

Komatsu 

106671-4093  
 
6152711610 
INJECTION-PUMP ASSEMBLY
SA6D125
Back to top