106671-2810 ZEXEL 9 400 616 759 BOSCH INJECTION-PUMP ASSEMBLY 9400616759 1066712810 3626501110


 

Information injection-pump assembly

BOSCH 9 400 616 759 9400616759
ZEXEL 106671-2810 1066712810
MITSUBISHI-HEAV 3626501110 3626501110
106671-2810 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 106671-2810 zexel genuine, new aftermarket engine parts with delivery

Service parts 106671-2810 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 106067-7701
3. GOVERNOR 105407-2150
4. SUPPLY PUMP 105217-1331
5. AUTOM. ADVANCE MECHANIS 105636-0301
6. COUPLING PLATE 105662-0710
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

106671-2810 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
106671-2810 
9 400 616 759 
3626501110  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6B K




Information:


Oil Filters (1), Oil Level Gauge (2), Oil Filler (3), Service Hour Meter (4), Fuel Filters & Priming Pump (5), Zinc Rods (6), Air Cleaner (7), Turbocharger (8), Crankcase Breather (9), Jacket Water Pump (10), Fuel Pump & Governor (11), Raw Water Pump (12), Oil Cooler (13).Serial Number Plate
For quick reference, record the serial number in the space provided below. Engine Serial Number ____________________The Serial Number Plate is located on the left rear side of the cylinder block.Information Plate
The 9L6531 Information Plate is located on the left side of the cylinder block or right hand side rear valve cover. The high idle rpm and the full load rpm are stamped on the Engine Information Plate.Reference Numbers
Record for ReferenceEngine Model ____________________Engine Serial No. ____________________Engine Arrangement No. ____________________Modification No. ____________________Engine Power Rating ____________________Engine Low Idle rpm ____________________Engine Full Load rpm ____________________Performance Specification No. ____________________Governor Group No. ____________________Fuel Filter No. ____________________Lubrication Oil Filter Element No. ____________________Auxiliary Oil Filter Element No. ____________________Supplemental Coolant Additive Maintenance Element No. ____________________Supplemental Coolant Additive Precharge Element No. ____________________Coolant Additive (Part No. & Quantity) ____________________Air Cleaner Element No. ____________________Lube System Capacity (Total) ____________________Cooling System Capacity (Total) ____________________Fan Drive Belt Set No. (If Equipped) ____________________Alternator Belt No. ____________________Zinc Rods ____________________Thermostats ____________________Engine Identification Numbers
Caterpillar engines are identified with serial numbers, fuel system setting numbers, performance specifications and arrangement numbers. In some cases modification numbers are also used. These numbers are shown on the serial number plate mounted on the engine.Caterpillar dealers need all of these numbers to determine which components were included on the engine when it was assembled at the factory. This permits accurate identification of replacement part numbers.Ordering Parts
Quality Caterpillar replacement parts are available from Caterpillar dealers throughout North America and the world. Their parts stocks are up to date and include all parts normally required to protect your investment in Caterpillar engines.* When ordering parts, your order should specify the part number, part name, quantity and serial number, arrangement number and modification number of the engine for which the parts are needed. If in doubt about the part number, please provide your dealer with a complete description of the needed item.* When maintenance or repair is needed for your Caterpillar engine, be prepared to give the dealer all the information that is provided on the 9L6531 Information Plate, described earlier in this manual.* Discuss the problem with the dealer, such as; when it occurs, what happens, etc. This will help the dealer in troubleshooting and solving the problem faster.A list of requirements of all Marine Shipping Societies and several items recommended by Caterpillar follows. To customize this list for your particular engine arrangement and application contact your authorized dealer and provide the information.1. Engine Serial Number2. Engine Arrangement Number3. Rated Horsepower4. Electrical System (12V or 24V)5. Alternator (1 or 2 belts)6. Raw Water Pump Part No.7. Type of Air Filter8. Water Lines Group (Parts Manual)Product Support Literature
All 3406 Marine EnginesCombined Publications
SEBU5881-Operation & Maintenance Manual (Marine Propulsion)SEBU6336-Operation & Maintenance Manual (contains Marine Auxiliary Generator Sets)SENR3023-3406 Service Manual

Have questions with 106671-2810?





Group cross 106671-2810 ZEXEL

Mitsubishi 

 
 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
 
ME056404 
INJECTION-PUMP ASSEMBLY
6D22T2

Mitsubishi-Heav 

106671-2810  
9 400 616 759 
3626501110 
INJECTION-PUMP ASSEMBLY
S6B

Mitsubishi 

 
ME056397 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22T2
F 019 Z20 488 
ME056400 
INJECTION-PUMP ASSEMBLY
6D22T2
 
 
INJECTION-PUMP ASSEMBLY
6D22T3
 
ME056401 
INJECTION-PUMP ASSEMBLY
6D22T3
 
 
INJECTION-PUMP ASSEMBLY
6D22T4
 
ME056402 
INJECTION-PUMP ASSEMBLY
6D22T4
 
ME056414 
INJECTION-PUMP ASSEMBLY
6D22H
 
ME056417 
INJECTION-PUMP ASSEMBLY
6D22
 
 
INJECTION-PUMP ASSEMBLY
6D22CT
9 400 616 760 
ME059623 
INJECTION-PUMP ASSEMBLY
6D22CT
 
 
INJECTION-PUMP ASSEMBLY
6D22CT
9 400 616 761 
ME059624 
INJECTION-PUMP ASSEMBLY
6D22CT
Back to top