106661-5270 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066615270

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 106661-5270 1066615270

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106661-5270 zexel genuine, new aftermarket engine parts with delivery

Service parts 106661-5270 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106066-1310

3. GOVERNOR 105407-3500

4. SUPPLY PUMP 105217-1730

5. AUTOM. ADVANCE MECHANIS 105614-4320

6. COUPLING PLATE 105662-0761

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-4570

11. Nozzle and Holder 1660096502

12. Open Pre:MPa(Kqf/cm2) 22.6(230)

13. NOZZLE-HOLDER 105031-4370

14. NOZZLE 105015-4170

15. NOZZLE SET

Include in #1:

106661-5270 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106661-5270 1066615270

Zexel num

Bosch num

Firm num

Name

106661-5270

INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 12.3

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 153.1 151.1 155.1

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point B

Rack position 11.3

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 135.2 133.2 137.2

Max. variation between cylinders % 0 -4 4

Fixing the lever *

Injection quantity adjustment_03

Adjusting point C

Rack position 6.7+-0.5

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 12.2 11.2 13.2

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Timer adjustment

Pump speed r/min 400--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 350

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 900

Advance angle deg. 2.5 2 3

Timer adjustment_04

Pump speed r/min -

Advance angle deg. 4 4 4

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Idle sub spring setting: L1.
----------
K=13 L1=6.7-0.5mm
----------

Speed control lever angle

F:Full speed I:Idle S:Stop (1)Speed set at aa (setting at shipping) (2)Set the pump speed at bb.
----------
aa=900r/min bb=750r/min
----------
a=27deg+-5deg b=5deg+-5deg c=32deg+-3deg d=7deg+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=26deg+-5deg b=53deg+-5deg

0000001501 GOV FULL LOAD ADJUSTMENT

Title1:Full load stopper adjustment Title2:Governor set speed LABEL1:Distinguishing LABEL2:Pump speed (r/min) LABEL3:Ave. injection quantity (mm3/st) LABEL4:Max. var. bet. cyl. LABEL5:Remarks LABEL6:Distinguishing LABEL7:Governor set speed (r/min) LABEL8:Remarks (1)Adjustment conditions are the same as those for measuring injection quantity. (2)-
----------

----------
a1=A a2=E r1=750r/min r2=750r/min Q1=153.1+-2mm3/st Q2=197.5+-2mm3/st c1=+-4% c2=+-4% a3=18 a4=15 r3=900r/min r4=750r/min