104780-9020 ZEXEL 9 460 612 451 BOSCH INJECTION-PUMP ASSEMBLY 9460612451 1047809020


 

Information injection-pump assembly

BOSCH 9 460 612 451 9460612451
ZEXEL 104780-9020 1047809020
104780-9020 INJECTION-PUMP ASSEMBLY
Rating:
56
Buy INJECTION-PUMP ASSEMBLY 104780-9020 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104780-9020
1. _
2. FUEL INJECTION PUMP 104680-9020
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1221
8. Nozzle and Holder 16600-63G01
9. Open Pre:MPa(Kqf/cm2) 9.8{100}
10. NOZZLE-HOLDER 105078-0050
11. NOZZLE 105007-1210

Scheme ###:

1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0420 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-2320 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2120 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6320 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-2600 COMPRESSION SPRING
34B. [1] 146312-2700 COMPRESSION SPRING
34C. [1] 146312-2500 COMPRESSION SPRING
34D. [1] 146312-2800 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0020 GUIDE PIN
50. [1] 146401-3420 HYDRAULIC HEAD
50. [1] 146401-3420 HYDRAULIC HEAD
50. [1] 146401-3420 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-3320 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146703-9820 COMPENSATOR,MANIFOLD-PRES
67/1. [1] 146805-3320 GOVERNOR COVER
67/14. [1] 146621-1800 UNION NUT
67/16. [1] 146526-3500 BLEEDER SCREW
67/31. [1] 146710-0700 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-1700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-1400 BUSHING
67/38. [1] 139506-0200 GASKET D8.9&6.8T1.00
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET D15.4&12.2T1.50
67/41. [1] 146713-4300 ADJUSTING PIN
67/42. [2] 146714-0200 PLATE
67/43. [1] 146715-0300 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT M6P1H3.6
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-4700 COILED SPRING
67/48/1. [1] 146720-3000 SPACER BUSHING L3.7
67/48/1. [1] 146720-3100 SPACER BUSHING L3.9
67/48/1. [1] 146720-3200 SPACER BUSHING L4.1
67/48/1. [1] 146720-3300 SPACER BUSHING L4.3
67/48/1. [1] 146720-3400 SPACER BUSHING L4.5
67/48/1. [1] 146720-3500 SPACER BUSHING L4.7
67/48/1. [1] 146720-3600 SPACER BUSHING L4.9
67/48/1. [1] 146720-3700 SPACER BUSHING L5.1
67/48/1. [1] 146720-3800 SPACER BUSHING L5.3
67/48/1. [1] 146720-3900 SPACER BUSHING L5.5
67/48/1. [1] 146720-4000 SPACER BUSHING L5.7
67/48/1. [1] 146720-4100 SPACER BUSHING L5.9
67/48/1. [1] 146720-4200 SPACER BUSHING L6.1
67/48/1. [1] 146720-4300 SPACER BUSHING L6.3
67/48/1. [1] 146720-4400 SPACER BUSHING L6.5
67/48/1. [1] 146720-8900 SPACER BUSHING L6.7
67/48/1. [1] 146720-9000 SPACER BUSHING L6.9
67/48/1. [1] 146720-9100 SPACER BUSHING L7.1
67/48/1. [1] 146720-9200 SPACER BUSHING L7.3
67/48/1. [1] 146720-9300 SPACER BUSHING L7.5
67/48/1. [1] 146720-9400 SPACER BUSHING L7.7
67/48/1. [1] 146720-9500 SPACER BUSHING L7.9
67/48/1. [1] 146720-9600 SPACER BUSHING L8.1
67/48/1. [1] 146720-9700 SPACER BUSHING L8.3
67/48/1. [1] 146720-9800 SPACER BUSHING L8.5
67/48/1. [1] 146720-9900 SPACER BUSHING L3.6
67/48/1. [1] 146725-0000 SPACER BUSHING L3.8
67/48/1. [1] 146725-0100 SPACER BUSHING L4.0
67/48/1. [1] 146725-0200 SPACER BUSHING L4.2
67/48/1. [1] 146725-0300 SPACER BUSHING L4.4
67/48/1. [1] 146725-0400 SPACER BUSHING L4.6
67/48/1. [1] 146725-0500 SPACER BUSHING L4.8
67/48/1. [1] 146725-0600 SPACER BUSHING L5.0
67/48/1. [1] 146725-0700 SPACER BUSHING L5.2
67/48/1. [1] 146725-0800 SPACER BUSHING L5.4
67/48/1. [1] 146725-0900 SPACER BUSHING L5.6
67/48/1. [1] 146725-1000 SPACER BUSHING L5.8
67/48/1. [1] 146725-1100 SPACER BUSHING L6.0
67/48/1. [1] 146725-1200 SPACER BUSHING L6.2
67/48/1. [1] 146725-1300 SPACER BUSHING L6.4
67/48/1. [1] 146725-1400 SPACER BUSHING L6.6
67/48/1. [1] 146725-1500 SPACER BUSHING L6.8
67/48/1. [1] 146725-1600 SPACER BUSHING L7.0
67/48/1. [1] 146725-1700 SPACER BUSHING L7.2
67/48/1. [1] 146725-1800 SPACER BUSHING L7.4
67/48/1. [1] 146725-1900 SPACER BUSHING L7.6
67/48/1. [1] 146725-2000 SPACER BUSHING L7.8
67/48/1. [1] 146725-2100 SPACER BUSHING L8.0
67/48/1. [1] 146725-2200 SPACER BUSHING L8.2
67/48/1. [1] 146725-2300 SPACER BUSHING L8.4
67/48/1. [1] 146725-2400 SPACER BUSHING L8.6
67/49. [1] 146721-4620 COVER
67/50. [1] 146722-0200 FLAT-HEAD SCREW
67/51. [1] 146600-0300 O-RING
67/53. [1] 013020-6040 UNION NUT M6P1H5
67/54. [2] 139006-4600 BLEEDER SCREW
67/55. [2] 146620-9800 BLEEDER SCREW
67/56. [1] 146723-0200 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET D9.9&6.2T1
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/64. [1] 146927-2300 BRACKET
67/78. [1] 146600-4400 SEAL RING
67/99. [2] 010006-1070 BLEEDER SCREW M6P1L10 7T
67/100. [1] 146934-4020 BRACKET
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146810-7520 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146536-5320 CONTROL LEVER
72B. [1] 146536-5420 CONTROL LEVER
72C. [1] 146830-6720 CONTROL LEVER
72D. [1] 146830-6820 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER
75. [1] 146621-0700 UNION NUT
95. [1] 146871-1320 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0420 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146975-7300 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-5820 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-1000 UNION NUT
147. [1] 146600-5000 O-RING
200. [1] 146206-0100 COILED SPRING
217. [1] 146541-3100 SLOTTED WASHER
218. [1] 146592-6100 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-6000 COILED SPRING
221. [1] 146927-2620 BRACKET
222. [2] 139006-4600 BLEEDER SCREW
224. [1] 146927-2700 BRACKET
230. [1] 146934-7920 BRACKET
231. [1] 139006-4600 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146688-0120 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 407911-1401 CONTROL UNIT
243. [1] 146621-4900 UNION NUT
245. [2] 139512-0500 GASKET
246. [1] 027412-2440 EYE BOLT
247. [1] 146669-5420 INLET UNION
247. [1] 146669-5420 INLET UNION
309. [1] 020146-1270 BLEEDER SCREW
310. [1] 146685-2820 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146620-1500 FLAT-HEAD SCREW
310/4. [1] 013020-6040 UNION NUT M6P1H5
310/5. [1] 146614-2300 JOINT CONNECTION
310/6. [1] 146661-0401 BOOT
351. [1] 146125-0101 FILTER
352. [1] 146125-0200 COILED SPRING
355. [1] 146934-6900 BRACKET
356. [1] 139006-4700 BLEEDER SCREW
357. [2] 146613-5620 PLATE
360. [1] 146663-1700 BUSHING
361. [1] 146649-8900 CAP
362. [2] 146620-8402 BLEEDER SCREW
800S. [1] 146018-0420 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
812S. [1] 146600-1920 PARTS SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
847S. [1] 146685-2810 POTENTCIOMETER
906. [1] 146973-4000 NAMEPLATE

Include in #2:

104780-9020 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 612 451 9460612451
ZEXEL 104780-9020 1047809020


Zexel num
Bosch num
Firm num
Name
104780-9020 
104780-9021 
9 460 612 451 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T OFF.
  OFF
Injection timing adjustment
Pump speed r/min   500 500 500
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   39.5 39 40
Basic   *
Oil temperature degC   48 46 50
Remarks
NA
 
Injection timing adjustment_02
Pump speed r/min   800 800 800
Boost pressure kPa   32 30.7 33.3
Boost pressure mmHg   240 230 250
Average injection quantity mm3/st.   53.9 53.4 54.4
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_03
Pump speed r/min   1200 1200 1200
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   71.6 71.1 72.1
Difference in delivery mm3/st.   6
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Injection timing adjustment_04
Pump speed r/min   500 500 500
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   39.5 38.5 40.5
Basic   *
Oil temperature degC   48 46 50
Remarks
NA
 
Injection timing adjustment_05
Pump speed r/min   800 800 800
Boost pressure kPa   32 30.7 33.3
Boost pressure mmHg   240 230 250
Average injection quantity mm3/st.   53.9 52.9 54.9
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_06
Pump speed r/min   1000 1000 1000
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   71.8 69.3 74.3
Oil temperature degC   50 48 52
Injection timing adjustment_07
Pump speed r/min   1200 1200 1200
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   71.6 70.6 72.6
Difference in delivery mm3/st.   6.5
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Injection timing adjustment_08
Pump speed r/min   1500 1500 1500
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   71.1 68.1 74.1
Oil temperature degC   50 48 52
Injection timing adjustment_09
Pump speed r/min   2000 2000 2000
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   66.7 63.7 69.7
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   2500 2500 2500
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   16.7 14.7 18.7
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_02
Pump speed r/min   2250 2250 2250
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   46.2 46.2 46.2
Oil temperature degC   52 50 54
Injection quantity adjustment_03
Pump speed r/min   2500 2500 2500
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   16.7 13.7 19.7
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_04
Pump speed r/min   2750 2750 2750
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   9.4 7.4 11.4
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   9.4 6.9 11.9
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   75 60 95
Basic   *
Oil temperature degC   48 46 50
Remarks
Full
 
Timer adjustment_02
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   75 60 95
Oil temperature degC   48 46 50
Remarks
Full
 
Speed control lever angle
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Overflow quantity with S/T ON cm3/min   450 320 580
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T ON kPa   510 471 549
Pressure with S/T ON kgf/cm2   5.2 4.8 5.6
Pressure with S/T OFF kPa   432 403 461
Pressure with S/T OFF kgf/cm2   4.4 4.1 4.7
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
Stop lever angle_02
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T OFF kPa   432 393 471
Pressure with S/T OFF kgf/cm2   4.4 4 4.8
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
Stop lever angle_03
Pump speed r/min   2150 2150 2150
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T OFF kPa   647 608 686
Pressure with S/T OFF kgf/cm2   6.6 6.2 7
Oil temperature degC   52 50 54
0000001101
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T ON mm   4.1 3.7 4.5
Timer stroke with S/T OFF mm   2.3 2.1 2.5
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_02
Pump speed r/min   700 700 700
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T OFF mm   0.8
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T ON mm   4.1 3.6 4.6
Timer stroke with S/T OFF mm   2.3 2 2.6
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_04
Pump speed r/min   2150 2150 2150
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T ON mm   7.8 7.3 8.2
Timer stroke with S/T OFF mm   7.2 6.6 7.8
Oil temperature degC   52 50 54
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   44 43.5 44.5
Timer stroke TA mm   1.7 1.5 1.9
Timer stroke variation dT mm   0.6 0.6 0.6
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_02
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   44 43 45
Timer stroke TA mm   1.7 1.4 2
Timer stroke variation dT mm   0.6 0.6 0.6
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   20 17.5 22.5
Timer stroke TA mm   0.7 0.2 1.2
Timer stroke variation dT mm   1.6 1.6 1.6
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   0.7 0.6 0.8
BCS stroke mm   7 6.8 7.2
Pre-stroke mm   0.1 0.08 0.12
Control lever angle alpha deg.   55.5 51.5 59.5
Control lever angle beta deg.   36 31 41

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104780-9020
N = pump speed Q = injection quantity V = output voltage C = control lever position C1 = idle C2 = full speed A = adjusting point B = confirmation point Vi = applied voltage
----------

----------
V1=1.4+-0.03(V) V2=9.5++(V) Vi=10(V)




Information:

Table 4 is an example for using the equation that is in Table 3.
Table 4
Example of the Equation for the Addition of Cat SCA To Water For Maintenance
Total Volume of the Cooling System (V) Multiplication
Factor Amount of Cat SCA that is Required (X)
946 L
(250 US gal) × 0.023 22 L
(6 US gal) Note: Specific engine applications may require maintenance practices to be periodically evaluated to maintain the engine cooling system properly.Cleaning the System of Heavy-Duty Coolant/Antifreeze
Before Cat SCA can be effective, the cooling system must be free from rust, scale, and other deposits. Preventive cleaning helps avoid downtime caused by expensive out-of-service cleaning required for extremelydirty and neglected cooling systems.Cat Cooling System Cleaners
Dissolves or depresses mineral scales, corrosion products, light oil contaminations, and sludges
Cleans the cooling system after used coolant is drained or before the cooling system is filled with new coolant
Cleans the cooling system whenever the coolant is contaminated or whenever the coolant is foaming
The “Standard” version of the Cat Cooling System Cleaners clean the cooling system while still in service.
Reduces downtime and cleaning costs
Helps avoid costly repairs from pitting and other internal problems caused by improper cooling system maintenance
Can be used with glycol-based antifreeze
For the recommended service interval, refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" for your engine.Cat Standard Cooling System Cleaners are designed to clean the cooling system of harmful scale and corrosion without removing the engine from service. The cleaners, both “Standard” and “Quick Flush” can be used in all Cat engine cooling systems. Consult your Cat dealer for part numbers.Note: These cleaners must not be used in systems that have been neglected or that have heavy scale buildup. These systems require a stronger commercial solvent that is available from local distributors.Prior to performing a cleaning of the cooling system, take a 1-liter (1-quart) sample of coolant from the engine while in operation into a clear container. Take the sample shortly after start-up while the coolant is not yet hot. The coolant should be adequately mixed by the water pump. Allow the sample

Have questions with 104780-9020?





Group cross 104780-9020 ZEXEL

104780-9020  

104780-9021 
9 460 612 451 
 
INJECTION-PUMP ASSEMBLY
9 460 613 220 
 
INJECTION-PUMP ASSEMBLY
9 460 613 315 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY
9 460 613 351 
 
INJECTION-PUMP ASSEMBLY
9 460 613 477 
 
INJECTION-PUMP ASSEMBLY
9 460 613 492 
 
INJECTION-PUMP ASSEMBLY
TD25-TI

Nissan 

9 460 614 027 
167003S901 
INJECTION-PUMP ASSEMBLY
TD25-TI

Nissan-Diesel 

9 460 614 027 
167003S901 
INJECTION-PUMP ASSEMBLY
TD25-TI
Back to top