Fuel injectors
  1. Home
  2. injection
  3. #1047692103

104769-2103 ZEXEL 9 460 610 200 BOSCH INJECTION-PUMP ASSEMBLY 9460610200 1047692103 16700v7212


 

Information injection-pump assembly

BOSCH 9 460 610 200 9460610200
ZEXEL 104769-2103 1047692103
NISSAN 16700V7212 16700v7212
104769-2103 INJECTION-PUMP ASSEMBLY
Rating:
60
Buy INJECTION-PUMP ASSEMBLY 104769-2103 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104769-2103
1. _
2. FUEL INJECTION PUMP 104669-2111
3. NUMBER PLATE 146644-8600
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105141-2512
8. Nozzle and Holder 16600-05E26
9. Open Pre:MPa(Kqf/cm2) 12.7{130}
10. NOZZLE-HOLDER 105071-0681
11. NOZZLE 105000-1871

Scheme ###:

PACKING RING
1/6. [1] 146601-0100 PACKING RING
6. [1] 146100-0220 SUPPLY PUMP D20 SVT
9. [1] 146103-0100 COVER SVT
10. [2] 139104-0000 FLAT-HEAD SCREW
12/1. [1] 146200-0400 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-1620 ROLLER SET NMC LD28 GY1
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146221-0120 CAM PLATE '01'Y490
30. [1] 146600-0800 O-RING
31. [1] 146311-5020 PUMP PLUNGER SVT
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-1000 COMPRESSION SPRING K=0.1
35/1. [1] 146603-8100 SHIM NMC LD28 GY1
35/1. [1] 146603-8200 SHIM NMC LD28 GY1
35/1. [1] 146603-8300 SHIM NMC LD28 GY1
35/1. [1] 146603-8400 SHIM NMC LD28 GY1
35/1. [1] 146603-8500 SHIM NMC LD28 GY1
36. [1] 146600-0800 O-RING
37. [1] 146310-0600 COVER NMC LD28 GY1
38. [2] 139106-0000 FLAT-HEAD SCREW
39. [1] 146310-0100 COVER
40. [2] 139106-0000 FLAT-HEAD SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0000 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM
48/1. [1] 146603-0100 SHIM
48/1. [1] 146603-0200 SHIM
48/1. [1] 146603-0300 SHIM
48/1. [1] 146603-0400 SHIM
48/1. [1] 146603-0500 SHIM
48/1. [1] 146603-0600 SHIM
48/1. [1] 146690-1400 SHIM
48/1. [1] 146690-1500 SHIM
48/1. [1] 146690-1600 SHIM
48/1. [1] 146690-1700 SHIM
48/1. [1] 146690-1800 SHIM
48/1. [1] 146690-1900 SHIM
49. [2] 146234-0020 GUIDE PIN
50. [1] 146405-1320 HYDRAULIC HEAD LD28 RQ1
50. [1] 146405-1320 HYDRAULIC HEAD LD28 RQ1
50. [1] 146405-1320 HYDRAULIC HEAD LD28 RQ1
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM
52/1. [1] 146420-0100 SHIM
52/1. [1] 146420-0200 SHIM
52/1. [1] 146420-0300 SHIM
52/1. [1] 146420-0400 SHIM
52/1. [1] 146420-0500 SHIM
52/1. [1] 146420-0600 SHIM
52/1. [1] 146420-0700 SHIM
52/1. [1] 146420-0800 SHIM
52/1. [1] 146420-0900 SHIM
52/1. [1] 146420-1000 SHIM
52/1. [1] 146420-1100 SHIM
52/1. [1] 146420-1200 SHIM
52/1. [1] 146420-1300 SHIM
52/1. [1] 146420-1400 SHIM
52/1. [1] 146420-1500 SHIM
52/1. [1] 146420-1600 SHIM
52/1. [1] 146420-1700 SHIM
52/1. [1] 146420-1800 SHIM
52/1. [1] 146420-1900 SHIM
52/1. [1] 146420-2000 SHIM
52/1. [1] 146420-2100 SHIM
52/1. [1] 146420-2200 SHIM
52/1. [1] 146420-2300 SHIM
52/1. [1] 146420-2400 SHIM
52/1. [1] 146420-2500 SHIM
52/1. [1] 146420-2600 SHIM
52/1. [1] 146420-2700 SHIM
52/1. [1] 146420-2800 SHIM
52/1. [1] 146420-2900 SHIM
52/1. [1] 146420-3000 SHIM
52/1. [1] 146420-3100 SHIM
52/1. [1] 146420-3200 SHIM
52/1. [1] 146420-3300 SHIM
52/1. [1] 146420-3400 SHIM
52/1. [1] 146420-3500 SHIM
52/1. [1] 146420-3600 SHIM
52/1. [1] 146420-3700 SHIM
52/1. [1] 146420-3800 SHIM
52/1. [1] 146420-3900 SHIM
52/1. [1] 146420-4000 SHIM
52/1. [1] 146420-4100 SHIM
52/1. [1] 146420-4200 SHIM
52/1. [1] 146420-4300 SHIM
52/1. [1] 146420-4400 SHIM
52/1. [1] 146420-4500 SHIM
52/1. [1] 146420-4600 SHIM
52/1. [1] 146420-4700 SHIM
52/1. [1] 146420-4800 SHIM
52/1. [1] 146420-4900 SHIM
52/1. [1] 146420-5000 SHIM
52/1. [1] 146420-5100 SHIM
52/1. [1] 146420-5200 SHIM
52/1. [1] 146420-5300 SHIM
52/1. [1] 146420-5400 SHIM
52/1. [1] 146420-5500 SHIM
52/1. [1] 146420-5600 SHIM
52/1. [1] 146420-5700 SHIM
52/1. [1] 146420-5800 SHIM
54. [6] 146433-0100 GASKET
55. [6] 146430-1920 DELIVERY-VALVE ASSEMBLY 'VE2' VR25S
56. [6] 146432-0000 COMPRESSION SPRING K=0.48
58. [6] 146440-0220 FITTING D0.45 L=50
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146502-8720 GOVERNOR COVER RQ1
67/4. [1] 139310-0200 PLAIN WASHER
67/6. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/8. [1] 146515-1820 LEVER SHAFT
67/9. [1] 146587-4500 COILED SPRING
67/10. [1] 146600-0200 O-RING
67/11. [1] 146602-0100 PLAIN WASHER
67/12. [1] 146540-2800 CONTROL LEVER ' 28'
67/12B. [1] 146540-2900 CONTROL LEVER ' 29'
67/14. [1] 146621-1800 UNION NUT
67/16. [1] 146526-3800 BLEEDER SCREW AUTO L=45 FULL
67/25. [1] 013020-6040 UNION NUT
68. [1] 146513-1120 CONTROL SHAFT R=10 S R
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146534-6120 CONTROL LEVER NMC RQ1
72/2. [1] 146526-2800 BLEEDER SCREW
72/3. [1] 146621-1700 UNION NUT
72/4. [1] 146620-3500 FLAT-HEAD SCREW
72/5. [1] 013020-6040 UNION NUT
72B. [1] 146534-6220 CONTROL LEVER NMC RQ1
72B/2. [1] 146526-2800 BLEEDER SCREW
72B/3. [1] 146621-1700 UNION NUT
72B/4. [1] 146620-3500 FLAT-HEAD SCREW
72B/5. [1] 013020-6040 UNION NUT
73. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
75. [1] 013020-6040 UNION NUT
87. [1] 139308-0300 PLAIN WASHER
88. [1] 146545-2120 THREADED PIN
90. [1] 139208-0100 UNION NUT
91. [1] 146600-1200 O-RING
92. [1] 146600-1000 SEAL RING
95. [1] 146561-1820 FULCRUM LEVER I=2.2
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET
106. [2] 146588-0000 COILED SPRING
107. [1] 146569-0100 UNION NUT
108. [1] 146570-0000 GOVERNOR SHAFT L
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM
110/1. [1] 146571-0100 SHIM
110/1. [1] 146571-0200 SHIM
110/1. [1] 146571-0300 SHIM
110/1. [1] 146571-0400 SHIM
110/1. [1] 146571-0500 SHIM
110/1. [1] 146571-0600 SHIM
110/1. [1] 146571-0700 SHIM
110/1. [1] 146571-0800 SHIM
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146575-2100 SLIDING SLEEVE '21' D0.5G
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG
117/1. [1] 146577-1900 PLUG
117/1. [1] 146577-2000 PLUG
117/1. [1] 146577-2100 PLUG
117/1. [1] 146577-2200 PLUG
117/1. [1] 146577-2300 PLUG
117/1. [1] 146577-2400 PLUG
117/1. [1] 146577-2500 PLUG
117/1. [1] 146577-2600 PLUG
117/1. [1] 146577-2700 PLUG
117/1. [1] 146577-2800 PLUG
117/1. [1] 146577-2900 PLUG
117/1. [1] 146577-3000 PLUG
117/1. [1] 146577-3100 PLUG
117/1. [1] 146577-3200 PLUG
117/1. [1] 146577-3300 PLUG
117/1. [1] 146577-6700 PLUG
117/1. [1] 146577-6800 PLUG
117/1. [1] 146577-6900 PLUG
117/1. [1] 146577-7000 PLUG
117/1. [1] 146577-7100 PLUG
117/1. [1] 146577-7200 PLUG
117/1. [1] 146577-7300 PLUG
117/1. [1] 146577-7400 PLUG
117/1. [1] 146577-7500 PLUG
117/1. [1] 146577-7600 PLUG
117/1. [1] 146577-7700 PLUG
117/1. [1] 146577-7800 PLUG
117/1. [1] 146577-7900 PLUG
117/1. [1] 146577-8000 PLUG
117/1. [1] 146577-8100 PLUG
123. [4] 139106-0200 FLAT-HEAD SCREW
130. [1] 146421-0020 CAPSULE D14
130/2. [1] 026508-1140 GASKET
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE '02'4XD1.6K=1.5
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0220 OVER FLOW VALVE
137. [2] 139512-0200 GASKET
138. [1] 146606-9120 INLET UNION OUT B1 B1
200. [1] 146206-0100 COILED SPRING
214. [1] 146541-1600 BUSHING
217. [1] 146541-3100 SLOTTED WASHER
218. [1] 146587-8200 COILED SPRING RQ1
219. [1] 146541-3000 BUSHING
220. [1] 146587-8600 COILED SPRING KT=20.58
221. [1] 146627-4420 BRACKET NMC RQ1
224. [1] 146627-2520 BRACKET NMC RQ1
230. [1] 146627-4820 BRACKET NMC RQ1
235. [1] 146679-0520 ACTUATOR NMC RQ1 10MM
235/2. [1] 146627-4901 BRACKET ACTR BRKT L=15
235/3. [2] 020146-1240 BLEEDER SCREW
236. [2] 139106-0500 FLAT-HEAD SCREW
236. [2] 139106-0500 FLAT-HEAD SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
239. [1] 023500-5140 PLAIN WASHER
240. [1] 146650-0720 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 013020-5240 UNION NUT
245. [3] 139512-0200 GASKET
245. [3] 139512-0200 GASKET
246. [1] 139812-0500 EYE BOLT
247. [1] 146610-1921 INLET UNION IN B3
248. [1] 146614-0200 SPACER BUSHING
275. [1] 146612-2200 BRACKET
276. [2] 010010-1640 BLEEDER SCREW
280. [1] 146360-4120 START ADVANCE ASSY RQ1 C/R
281. [1] 146600-0800 O-RING
282. [2] 010206-1240 HEX-SOCKET-HEAD CAP SCREW
286. [1] 014010-6140 PLAIN WASHER
287. [1] 020106-1440 BLEEDER SCREW
330. [1] 146627-5501 PLATE
331. [2] 139106-1200 FLAT-HEAD SCREW NDC SD25 FEDICS
800S. [1] 146009-8020 PUMP HOUSING RQ1
800S/1/6. [1] 146601-0100 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
880S. [1] 146430-1720 DELIVERY-VALVE ASSEMBLY 'VE2' VR25S
881S. [1] 146430-1820 DELIVERY-VALVE ASSEMBLY 'VE2' VR25S
906. [1] 146644-8600 NUMBER PLATE NMC RD28
924. [1] 146680-2121 DAMPER RQ1
924/2. [1] 146627-4621 BRACKET D/P
932. [1] 146670-4720 SWITCH NMC RQ1
932/1. [1] 146670-4420 SWITCH UNIT NMC RQ1
932/2. [1] 146627-4000 BRACKET NMC RQ1 ACCBRKT
932/3. [1] 595399-1700 CLAMPING BAND
933. [1] 010006-1640 BLEEDER SCREW
934. [1] 013030-6040 UNION NUT

Include in #2:

104769-2103 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104769-2103 
104769-2105 
9 460 610 200 
16700V7212  NISSAN
INJECTION-PUMP ASSEMBLY
RD28 *




Information:

Start By:a. remove valve covers 1. Use Tool (A) and disconnect fuel line (1) at each end. Remove the fuel line from the engine. 2. Use Tool (B) and remove retainer (2) from the adapter.3. Remove the fuel injection nozzles with Tool (C) as follows:a. Install the 6V6983 Adapter and the 8T3199 Screw into nozzle assembly (3).b. Install the 8T3198 Tube over the 8T3199 Screw.c. Use the 1B4206 Nut on the 8T3199 Screw to pull the fuel injection nozzle (3).4. Remove compression seal (4) and carbon dam seal (8) from fuel injection nozzle (3).5. Use Tool (D) and remove adapter (6) from the cylinder head.6. Remove gasket (7) and seal (5) from adapter (6). The following steps are for the installation of the fuel injection nozzles and adapters.7. Use Tool (E) to clean the bore in adapter (6). Use an open end wrench or tap driver to turn Tool (E).8. Inspect seal (5) for damage or wear. Replace the seal if necessary.9. Put washer (7) and seal (5) in position on adapter (6).10. Put liquid soap in the bores of the cylinder head and on seals (5) in the adapters.11. Put 5P3931 Anti-Seize Compound on the threads of adapter (6) and install the adapter in the cylinder head assembly.12. Use Tool (D) and tighten the adapter to a torque of 205 14 N m (150 10 lb ft).
Make sure the correct compression seal washer (4) is used when the nozzle assembly is installed in the adapter. Only copper washers are to be used with this adapter.
13. Install compression seal washer (4) and use Tool (F) to install carbon dam seal (8) on the fuel injection nozzle.14. Put fuel injection nozzle (3) in position in the adapter and install retainer (2).15. Use Tool (B) to tighten retainer (2) to a torque of 48 7 N m (35 5 lb ft).16. Install fuel line (1). Tighten the nuts on the fuel line with Tool (A) to a torque of 40 7 N m (30 5 lb ft).End By:a. install valve covers

Have questions with 104769-2103?





Group cross 104769-2103 ZEXEL

Nissan 

104769-2100  

104769-2105 
 
16700V7210 
INJECTION-PUMP ASSEMBLY
LD28
104769-2101  

104769-2105 
 
 
INJECTION-PUMP ASSEMBLY
LD28
104769-2102  

104769-2105 
 
16700V7211 
INJECTION-PUMP ASSEMBLY
RD28
104769-2103  

104769-2105 
9 460 610 200 
16700V7212 
INJECTION-PUMP ASSEMBLY
RD28
104769-2104  

104769-2105 
9 460 610 266 
 
INJECTION-PUMP ASSEMBLY
RD28
104769-2105  
9 460 610 415 
16700V7213 
INJECTION-PUMP ASSEMBLY
RD28
Back to top