104769-2091 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1047692091 16700v7201

Information injection-pump assembly

ZEXEL 104769-2091 1047692091

NISSAN 16700V7201 16700v7201

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104769-2091 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104769-2091
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE	146644-6500
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105141-2512
8.	Nozzle and Holder	16600-05E26
9.	Open Pre:MPa(Kqf/cm2)	12.7{130}
10.	NOZZLE-HOLDER	105071-0681
11.	NOZZLE	105000-1871

Scheme ###:

1/6.	[1]	146601-0100	PACKING RING
6.	[1]	146100-0220	SUPPLY PUMP D20 SVT
9.	[1]	146103-0100	COVER SVT
10.	[2]	139104-0000	FLAT-HEAD SCREW
12/1.	[1]	146200-0400	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-1620	ROLLER SET NMC LD28 GY1
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146221-0120	CAM PLATE '01'Y490
30.	[1]	146600-0800	O-RING
31.	[1]	146311-5020	PUMP PLUNGER SVT
32.	[1]	146301-0000	SLIDING PIECE
34.	[1]	146312-0900	COMPRESSION SPRING K=0.115
34B.	[1]	146312-1000	COMPRESSION SPRING K=0.1
35/1.	[1]	146603-8100	SHIM NMC LD28 GY1
35/1.	[1]	146603-8200	SHIM NMC LD28 GY1
35/1.	[1]	146603-8300	SHIM NMC LD28 GY1
35/1.	[1]	146603-8400	SHIM NMC LD28 GY1
35/1.	[1]	146603-8500	SHIM NMC LD28 GY1
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0600	COVER NMC LD28 GY1
38.	[2]	139106-0000	FLAT-HEAD SCREW
39.	[1]	146310-0100	COVER
40.	[2]	139106-0000	FLAT-HEAD SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0000	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM
48/1.	[1]	146603-0100	SHIM
48/1.	[1]	146603-0200	SHIM
48/1.	[1]	146603-0300	SHIM
48/1.	[1]	146603-0400	SHIM
48/1.	[1]	146603-0500	SHIM
48/1.	[1]	146603-0600	SHIM
48/1.	[1]	146690-1400	SHIM
48/1.	[1]	146690-1500	SHIM
48/1.	[1]	146690-1600	SHIM
48/1.	[1]	146690-1700	SHIM
48/1.	[1]	146690-1800	SHIM
48/1.	[1]	146690-1900	SHIM
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146405-1320	HYDRAULIC HEAD LD28 RQ1
50.	[1]	146405-1320	HYDRAULIC HEAD LD28 RQ1
50.	[1]	146405-1320	HYDRAULIC HEAD LD28 RQ1
51.	[1]	146600-0000	O-RING
52/1.	[1]	146490-0000	SHIM
52/1.	[1]	146490-0100	SHIM
52/1.	[1]	146490-0200	SHIM
52/1.	[1]	146490-0300	SHIM
52/1.	[1]	146490-0400	SHIM
52/1.	[1]	146490-0500	SHIM
52/1.	[1]	146490-0600	SHIM
52/1.	[1]	146490-0700	SHIM
52/1.	[1]	146490-0800	SHIM
52/1.	[1]	146490-0900	SHIM
52/1.	[1]	146490-1000	SHIM
52/1.	[1]	146490-1100	SHIM
52/1.	[1]	146490-1200	SHIM
52/1.	[1]	146490-1300	SHIM
52/1.	[1]	146490-1400	SHIM
52/1.	[1]	146490-1500	SHIM
52/1.	[1]	146490-1600	SHIM
52/1.	[1]	146490-1700	SHIM
52/1.	[1]	146490-1800	SHIM
52/1.	[1]	146490-1900	SHIM
52/1.	[1]	146490-2000	SHIM
52/1.	[1]	146490-2100	SHIM
52/1.	[1]	146490-2200	SHIM
52/1.	[1]	146490-2300	SHIM
52/1.	[1]	146490-2400	SHIM
52/1.	[1]	146490-2500	SHIM
52/1.	[1]	146490-2600	SHIM
52/1.	[1]	146490-2700	SHIM
52/1.	[1]	146490-2800	SHIM
52/1.	[1]	146490-2900	SHIM
52/1.	[1]	146490-3000	SHIM
52/1.	[1]	146490-3100	SHIM
52/1.	[1]	146490-3200	SHIM
52/1.	[1]	146490-3300	SHIM
52/1.	[1]	146490-3400	SHIM
52/1.	[1]	146490-3500	SHIM
52/1.	[1]	146490-3600	SHIM
52/1.	[1]	146490-3700	SHIM
52/1.	[1]	146490-3800	SHIM
52/1.	[1]	146490-3900	SHIM
52/1.	[1]	146490-4000	SHIM
52/1.	[1]	146490-4100	SHIM
52/1.	[1]	146490-4200	SHIM
52/1.	[1]	146490-4300	SHIM
52/1.	[1]	146490-4400	SHIM
52/1.	[1]	146490-4500	SHIM
52/1.	[1]	146490-4600	SHIM
52/1.	[1]	146490-4700	SHIM
52/1.	[1]	146490-4800	SHIM
52/1.	[1]	146490-4900	SHIM
52/1.	[1]	146490-5000	SHIM
54.	[6]	146433-0100	GASKET
55.	[6]	146430-0120	DELIVERY-VALVE ASSEMBLY 'VE2' VR25
56.	[6]	146432-0000	COMPRESSION SPRING K=0.48
58.	[6]	146440-0220	FITTING D0.45 L=50
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146502-8720	GOVERNOR COVER RQ1
67/4.	[1]	139310-0200	PLAIN WASHER
67/6.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/8.	[1]	146515-1820	LEVER SHAFT
67/9.	[1]	146587-4500	COILED SPRING
67/10.	[1]	146600-0200	O-RING
67/11.	[1]	146602-0100	PLAIN WASHER
67/12.	[1]	146540-2800	CONTROL LEVER ' 28'
67/12B.	[1]	146540-2900	CONTROL LEVER ' 29'
67/14.	[1]	146621-1800	UNION NUT
67/16.	[1]	146526-3800	BLEEDER SCREW AUTO L=45 FULL
67/25.	[1]	013020-6040	UNION NUT
68.	[1]	146510-7720	CONTROL SHAFT R=13 S L
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146534-6120	CONTROL LEVER NMC RQ1
72/2.	[1]	146526-2800	BLEEDER SCREW
72/3.	[1]	146621-1700	UNION NUT
72/4.	[1]	146620-3500	FLAT-HEAD SCREW
72/5.	[1]	013020-6040	UNION NUT
72B.	[1]	146534-6220	CONTROL LEVER NMC RQ1
72B/2.	[1]	146526-2800	BLEEDER SCREW
72B/3.	[1]	146621-1700	UNION NUT
72B/4.	[1]	146620-3500	FLAT-HEAD SCREW
72B/5.	[1]	013020-6040	UNION NUT
73.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
75.	[1]	013020-6040	UNION NUT
87.	[1]	139308-0300	PLAIN WASHER
88.	[1]	146545-2120	THREADED PIN
90.	[1]	139208-0100	UNION NUT
91.	[1]	146600-1200	O-RING
92.	[1]	146600-1000	SEAL RING
95.	[1]	146561-1620	FULCRUM LEVER I=2.2
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET
106.	[2]	146588-0000	COILED SPRING
107.	[1]	146569-0100	UNION NUT
108.	[1]	146570-0000	GOVERNOR SHAFT L
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM
110/1.	[1]	146571-0100	SHIM
110/1.	[1]	146571-0200	SHIM
110/1.	[1]	146571-0300	SHIM
110/1.	[1]	146571-0400	SHIM
110/1.	[1]	146571-0500	SHIM
110/1.	[1]	146571-0600	SHIM
110/1.	[1]	146571-0700	SHIM
110/1.	[1]	146571-0800	SHIM
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-1900	SLIDING SLEEVE '19' D0.8G
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-1800	PLUG
117/1.	[1]	146577-1900	PLUG
117/1.	[1]	146577-2000	PLUG
117/1.	[1]	146577-2100	PLUG
117/1.	[1]	146577-2200	PLUG
117/1.	[1]	146577-2300	PLUG
117/1.	[1]	146577-2400	PLUG
117/1.	[1]	146577-2500	PLUG
117/1.	[1]	146577-2600	PLUG
117/1.	[1]	146577-2700	PLUG
117/1.	[1]	146577-2800	PLUG
117/1.	[1]	146577-2900	PLUG
117/1.	[1]	146577-3000	PLUG
117/1.	[1]	146577-3100	PLUG
117/1.	[1]	146577-3200	PLUG
117/1.	[1]	146577-3300	PLUG
117/1.	[1]	146577-6700	PLUG
117/1.	[1]	146577-6800	PLUG
117/1.	[1]	146577-6900	PLUG
117/1.	[1]	146577-7000	PLUG
117/1.	[1]	146577-7100	PLUG
117/1.	[1]	146577-7200	PLUG
117/1.	[1]	146577-7300	PLUG
117/1.	[1]	146577-7400	PLUG
117/1.	[1]	146577-7500	PLUG
117/1.	[1]	146577-7600	PLUG
117/1.	[1]	146577-7700	PLUG
117/1.	[1]	146577-7800	PLUG
117/1.	[1]	146577-7900	PLUG
117/1.	[1]	146577-8000	PLUG
117/1.	[1]	146577-8100	PLUG
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE D14
130/2.	[1]	026508-1140	GASKET
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE '02'4XD1.6K=1.5
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0220	OVER FLOW VALVE
137.	[2]	139512-0200	GASKET
138.	[1]	146606-9120	INLET UNION OUT B1 B1
200.	[1]	146206-0100	COILED SPRING
214.	[1]	146541-1600	BUSHING
217.	[1]	146541-3100	SLOTTED WASHER
218.	[1]	146587-8200	COILED SPRING RQ1
219.	[1]	146541-3000	BUSHING
220.	[1]	146587-8600	COILED SPRING KT=20.58
221.	[1]	146627-4420	BRACKET NMC RQ1
224.	[1]	146627-2520	BRACKET NMC RQ1
230.	[1]	146627-4820	BRACKET NMC RQ1
235.	[1]	146679-0221	ACTUATOR NMC RQ1 11MM L=
235/2.	[1]	146627-4901	BRACKET ACTR BRKT L=15
235/3.	[2]	020146-1240	BLEEDER SCREW
236.	[2]	139106-0500	FLAT-HEAD SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
239.	[1]	023500-5140	PLAIN WASHER
240.	[1]	146650-0720	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-4420	WIRE ' 44' 12V
243.	[1]	013020-5240	UNION NUT
245.	[3]	139512-0200	GASKET
246.	[1]	139812-0500	EYE BOLT
247.	[1]	146610-1921	INLET UNION IN B3
248.	[1]	146614-0200	SPACER BUSHING
275.	[1]	146612-2200	BRACKET
276.	[2]	010010-1640	BLEEDER SCREW
280.	[1]	146360-4120	START ADVANCE ASSY RQ1 C/R
281.	[1]	146600-0800	O-RING
282.	[2]	010206-1240	HEX-SOCKET-HEAD CAP SCREW
286.	[1]	014010-6140	PLAIN WASHER
287.	[1]	020106-1440	BLEEDER SCREW
316.	[1]	146680-1221	DAMPER D/P
316/2.	[1]	146627-4621	BRACKET D/P
330.	[1]	146627-5500	PLATE NMC RQ1
331.	[2]	139106-1200	FLAT-HEAD SCREW NDC SD25 FEDICS
800S.	[1]	146009-8020	PUMP HOUSING RQ1
800S/1/6.	[1]	146601-0100	PACKING RING
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
906.	[1]	146644-6500	NUMBER PLATE RQ1

Include in #2:

104769-2091 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

104769-2091
104769-2105

16700V7201 NISSAN

INJECTION-PUMP ASSEMBLY
LD28 *

Information:

1. Disconnect air line (1) from the fuel ratio control.2. Remove wire seal (4) from the bolts.3. Remove bolts (3) that hold fuel ratio control (2).4. Remove the fuel ratio control by pulling down and out from the collar. The following steps are for the installation of the fuel ratio control.5. Put fuel ratio control (2) in position on the governor. Make sure the valve head of the fuel ratio control is connected in the groove of the collar.6. Install bolts (3) that hold the fuel ratio control to the governor. Connect air line (1) to the fuel ratio control.7. To make an adjustment to the fuel ratio control, see the topic "Governor Adjustment For The Air Fuel Ratio Control" in, Testing & Adjusting Manual SENR6471.8. Install wire seal (4) on the bolts with Tool (A).Disassemble & Assemble Fuel Ratio Control
Start By:a. remove fuel ratio control 1. Put Tool (A) in a vise so that the station being used is not over the vise jaw. Place the fuel ratio control over the pins in Tool (A). Remove bolts (3) and remove cover (26) and gasket (24).
There is spring force behind cover (7). Hold cover (7) in position, and slowly remove the bolts that hold it to release the spring force.
2. Remove bolts (6). Remove cover (7) from housing (10).3. Remove nut (5) and stop (4) from cover (7).4. Remove spring (8), washer (9) and diaphragm (21) from retainer (25). Remove retainer (25) from housing (10).5. Remove tube (1) from the end of extension (19). Remove nut (2) from extension (19) and remove the extension from retainer (25). Remove valve (16), spring (22) and O-ring seal (23) from the extension.6. Remove spring (20), retainer (18) and spring (17) from housing (10).7. Remove piston (12) and valve assembly (14) from the housing.8. Use Tool (B) and remove snap ring (13) and washer (15) from the valve assembly. Remove piston (12) from the valve assembly.9. Remove seal (11) from piston (12).10. If necessary, remove the stem portion from valve assembly (14).11. Clean and inspect all parts. Make a replacement of all parts that are worn and damaged. The following steps are for the assembly of the fuel ratio control.12. If removed during disassembly, assemble the stem portion of valve assembly (14) on the valve using 9S3265 Retaining Compound.13. Lubricate seal (11) lightly with the lubricant being sealed. Put seal (11) on piston (12) and put piston (12) on valve assembly (14).14. Put washer (15) in position on the valve assembly and use Tool (B) to install snap ring (13) on the valve assembly.15. Place housing (10) on Tool (A), and put Tool (C) into the bore of the housing. Lubricate Tool (C) with clean engine oil.16. Push piston (12) into position with a smooth swift motion. Remove Tool (C) from the housing. Place spring (17), retainer (18) and spring (20) in housing (10).17. Put O-ring seal (23) on extension (19). Put spring (22) and valve (16) in position on the