Information injection-pump assembly
BOSCH
F 01G 09W 0GP
f01g09w0gp
ZEXEL
104761-3002
1047613002
MITSUBISHI-HEAV
32B6510010
32b6510010
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Diesel Fuel Injection Pump 104761-3002 NP-VE6/11F1150RNP222 32B65-00010 Compatible For MITSUBISHI S6S
TINEOOC OEM NO. 104761-3002 NP-VE6/11F1150RNP222 32B65-00010 || Diesel Fuel Injection Pump 104761-3002 NP-VE6/11F1150RNP222 32B65-00010 Compatible For MITSUBISHI S6S || ⚙️ The name of my store is: A spare parts king, here is the car parts you want! || ⚙️ The fuel pump is equipped with a standardized interface for quick and easy installation, no additional tools or modifications are required, and vehicle owners can easily replace it by themselves. || ⚙️ Optimized design and advanced technology ensure that the fuel pump provides a constant and stable fuel supply, enhancing the overall performance and fuel efficiency of the vehicle.
TINEOOC OEM NO. 104761-3002 NP-VE6/11F1150RNP222 32B65-00010 || Diesel Fuel Injection Pump 104761-3002 NP-VE6/11F1150RNP222 32B65-00010 Compatible For MITSUBISHI S6S || ⚙️ The name of my store is: A spare parts king, here is the car parts you want! || ⚙️ The fuel pump is equipped with a standardized interface for quick and easy installation, no additional tools or modifications are required, and vehicle owners can easily replace it by themselves. || ⚙️ Optimized design and advanced technology ensure that the fuel pump provides a constant and stable fuel supply, enhancing the overall performance and fuel efficiency of the vehicle.
$1,180.00
09 Mar 2024
0.1102[0.05] Pounds
CN: AoSenTong92113
Diesel VE Fuel Injection Pump 104661-3001 104761-3001 104761-3002 NP-VE6/11F1150RNP222 32B65-00010 Compatible With MITSUBISHI S6S
XZKJ ⭐ Easy installation: The fuel pump usually has a simple structure and compact size, which is convenient to install in the fuel system of the vehicle. || ⭐ Save fuel: The automobile fuel pump can accurately supply fuel, ensure the effective use of fuel, improve fuel economy and reduce vehicle fuel consumption. || ⭐ Reliability: The fuel pump is made of durable materials and technology, which has high reliability and long service life and ensures the stable operation of the car. || ⭐ Low noise: advanced fuel pump design and noise reduction technology make the operation of automobile fuel pump quieter and reduce the influence of noise on ride comfort. || ⭐ Balance: The automobile fuel pump has good balance and can maintain a stable working state under high-speed operation, which is not affected by vibration and pressure changes.
XZKJ ⭐ Easy installation: The fuel pump usually has a simple structure and compact size, which is convenient to install in the fuel system of the vehicle. || ⭐ Save fuel: The automobile fuel pump can accurately supply fuel, ensure the effective use of fuel, improve fuel economy and reduce vehicle fuel consumption. || ⭐ Reliability: The fuel pump is made of durable materials and technology, which has high reliability and long service life and ensures the stable operation of the car. || ⭐ Low noise: advanced fuel pump design and noise reduction technology make the operation of automobile fuel pump quieter and reduce the influence of noise on ride comfort. || ⭐ Balance: The automobile fuel pump has good balance and can maintain a stable working state under high-speed operation, which is not affected by vibration and pressure changes.
$1,180.00
21 Dec 2023
0.1102[0.05] Pounds
CN: YuLiJian1986
Diesel VE Fuel Injection Pump 104661-3001 104761-3001 104761-3002 NP-VE6/11F1150RNP222 32B65-00010 Compatible With MITSUBISHI S6S
MoooY ☆. High efficiency: Our jet pump assembly can provide efficient fuel supply to ensure the normal operation and best of the engine. || ☆. Strong accuracy: Our jet pump assembly has accurate fuel injection function, which can ensure the combustion efficiency and of the engine. || ☆. Excellent materials: Our automobile fuel injection pump assembly is made of excellent materials to ensure the durability and reliability of the products. || ☆. Stability: Our jet pump assembly has stable , which can maintain good working conditions under various working conditions and provide reliable power support. || ☆. Long service life: Our jet pump assembly has undergone strict quality control and testing, which has a long service life and reduces the frequency of replacement and maintenance.
MoooY ☆. High efficiency: Our jet pump assembly can provide efficient fuel supply to ensure the normal operation and best of the engine. || ☆. Strong accuracy: Our jet pump assembly has accurate fuel injection function, which can ensure the combustion efficiency and of the engine. || ☆. Excellent materials: Our automobile fuel injection pump assembly is made of excellent materials to ensure the durability and reliability of the products. || ☆. Stability: Our jet pump assembly has stable , which can maintain good working conditions under various working conditions and provide reliable power support. || ☆. Long service life: Our jet pump assembly has undergone strict quality control and testing, which has a long service life and reduces the frequency of replacement and maintenance.
Cross reference number
Zexel num
Bosch num
Firm num
Name
104761-3002
F 01G 09W 0GP
32B6510010 MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6S
S6S
Information:
3.1 Service Standards Table
3.2 Tightening torque table
4. Special Tool
5. Service Procedures
5.1 Removal and Installation
(1) Removal (a) When removing the pressure plate and lever assembly, fix the pressure plate using the special tools, Stopper Bolt and Washer. (C4 and C8 only) (b) Install the special tool, Clutch Alignment Arbor to prevent drop of the clutch disc and then remove the pressure plate and lever assembly.(2) Installation (a) Install the clutch disc using the special tool, Clutch Alignment Arbor. When installing the clutch disc, use care not to confuse the front and reverse sides. Install with the side bearing the part No. facing outside. (b) Install the pressure plate and lever assembly, aligning with the knock pins of the fly wheel. In the case of C4 and C8, install after fixing the pressure plate using special tools, Stopper Bolt and Washer. 1. Before installing the clutch, check and clean the flywheel. If faulty, correct or replace.2. When tightening the bolts, do so in diagonal order and uniformly.3. After installation, be sure to remove the Stopper Bolt and Washer. (C4 and C8 only)(c) Inspection of release lever plate height (at clutch disc replacement only) Using special tool, Clutch Release Lever Aligner, check the height of the clutch cover and release lever plate.If adjustment is necessary, adjust referring to 5.2.2 (3).(d) Adjustment after installation of bearing case. After installation, adjust the free travel (clearance between the release bearing and release lever). 1) Move the lever in the direction to engage the clutch. At a position where a click is heard in the clutch, turn the adjusting bolt A until it is blocked by the stopper, and lock it by turning down the bolt another two or three threads.2) From the position where the release bearing has touched the release lever, turn the adjusting screw B in the direction to disengage the clutch and check to see that the clutch is in disengaged position. Then lock the bolt. When making adjustment, lock in position the ratchet of the lever of the opposite side. 1) Loosen the control ling lock nut and from the position where the release bearing is in contact with the release lever, move back by B1 mm and lock in position (clutch lever setting position when clutch is engaged).2) In the direction to disengage the clutch, lock the air cylinder adjusting bolt at a position B2 mm from the position where the release bearing is in contact with the release lever.5.2 Clutch Proper
Disassembly and inspection
Disassembly and Inspection(1) Removal of clutch cover (a) Matchmark the clutch cover and pressure plate and using special tool, Clutch Installer, compress the pressure spring and remove support lever nut, strap bolt, etc.(b) Slowly loosen the handle of the Clutch Installer to remove the clutch cover.(2) Wear of facing Measure the depth from facing surface to rivet head. If the depth is smaller than the limit, replace the clutch disc assembly.(3) Runout of clutch disc Using a runout tester, measure the runout of the clutch
3.2 Tightening torque table
4. Special Tool
5. Service Procedures
5.1 Removal and Installation
(1) Removal (a) When removing the pressure plate and lever assembly, fix the pressure plate using the special tools, Stopper Bolt and Washer. (C4 and C8 only) (b) Install the special tool, Clutch Alignment Arbor to prevent drop of the clutch disc and then remove the pressure plate and lever assembly.(2) Installation (a) Install the clutch disc using the special tool, Clutch Alignment Arbor. When installing the clutch disc, use care not to confuse the front and reverse sides. Install with the side bearing the part No. facing outside. (b) Install the pressure plate and lever assembly, aligning with the knock pins of the fly wheel. In the case of C4 and C8, install after fixing the pressure plate using special tools, Stopper Bolt and Washer. 1. Before installing the clutch, check and clean the flywheel. If faulty, correct or replace.2. When tightening the bolts, do so in diagonal order and uniformly.3. After installation, be sure to remove the Stopper Bolt and Washer. (C4 and C8 only)(c) Inspection of release lever plate height (at clutch disc replacement only) Using special tool, Clutch Release Lever Aligner, check the height of the clutch cover and release lever plate.If adjustment is necessary, adjust referring to 5.2.2 (3).(d) Adjustment after installation of bearing case. After installation, adjust the free travel (clearance between the release bearing and release lever). 1) Move the lever in the direction to engage the clutch. At a position where a click is heard in the clutch, turn the adjusting bolt A until it is blocked by the stopper, and lock it by turning down the bolt another two or three threads.2) From the position where the release bearing has touched the release lever, turn the adjusting screw B in the direction to disengage the clutch and check to see that the clutch is in disengaged position. Then lock the bolt. When making adjustment, lock in position the ratchet of the lever of the opposite side. 1) Loosen the control ling lock nut and from the position where the release bearing is in contact with the release lever, move back by B1 mm and lock in position (clutch lever setting position when clutch is engaged).2) In the direction to disengage the clutch, lock the air cylinder adjusting bolt at a position B2 mm from the position where the release bearing is in contact with the release lever.5.2 Clutch Proper
Disassembly and inspection
Disassembly and Inspection(1) Removal of clutch cover (a) Matchmark the clutch cover and pressure plate and using special tool, Clutch Installer, compress the pressure spring and remove support lever nut, strap bolt, etc.(b) Slowly loosen the handle of the Clutch Installer to remove the clutch cover.(2) Wear of facing Measure the depth from facing surface to rivet head. If the depth is smaller than the limit, replace the clutch disc assembly.(3) Runout of clutch disc Using a runout tester, measure the runout of the clutch
Have questions with 104761-3002?
Group cross 104761-3002 ZEXEL
Mitsubishi-Heav
104761-3002
F 01G 09W 0GP
32B6510010
INJECTION-PUMP ASSEMBLY
S6S
S6S