Fuel injectors
  1. Home
  2. injection
  3. #1047610000

104761-0000 ZEXEL 9 460 612 064 BOSCH INJECTION-PUMP ASSEMBLY 9460612064 1047610000 v10113800a


 

Information injection-pump assembly

BOSCH 9 460 612 064 9460612064
ZEXEL 104761-0000 1047610000
MAZDA V10113800A v10113800a
104761-0000 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 104761-0000 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104761-0000
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105101-1970
8. Nozzle and Holder 4874 13 640
9. Open Pre:MPa(Kqf/cm2) 13.2{135}
10. NOZZLE-HOLDER 105031-1610
11. NOZZLE 105000-1030

Scheme ###:

PACKING RING
1/6. [1] 146601-0000 PACKING RING
6. [1] 146100-0020 SUPPLY PUMP
9. [1] 146103-0000 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-0020 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146221-0220 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-0500 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
33. [1] 146603-0700 SHIM
34. [1] 146302-0400 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0000 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [2] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [2] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [2] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [2] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [2] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [2] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [2] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [2] 146690-1400 SHIM D17&5.2T0.9
48/1. [2] 146690-1500 SHIM D17&5.2T1.1
48/1. [2] 146690-1600 SHIM D17&5.2T1.3
48/1. [2] 146690-1700 SHIM D17&5.2T1.4
48/1. [2] 146690-1800 SHIM D17&5.2T1.6
48/1. [2] 146690-1900 SHIM D17&5.2T1.7
48/1. [2] 146690-5800 SHIM
48/1. [2] 146690-5900 SHIM
48/1. [2] 146690-6000 SHIM
48/1. [2] 146690-6100 SHIM
48/1. [2] 146690-6200 SHIM
48/1. [2] 146690-6300 SHIM
48/1. [2] 146690-6400 SHIM
48/1. [2] 146690-6500 SHIM
48/1. [2] 146690-6600 SHIM
48/1. [2] 146690-6700 SHIM
48/1. [2] 146690-6800 SHIM
48/1. [2] 146690-6900 SHIM
48/1. [2] 146690-7000 SHIM
48/1. [2] 146690-7100 SHIM
48/1. [2] 146690-7200 SHIM
48/1. [2] 146690-7300 SHIM
48/1. [2] 146690-7400 SHIM
48/1. [2] 146690-7500 SHIM
48/1. [2] 146690-7800 SHIM
49. [2] 146234-0020 GUIDE PIN
50. [1] 146405-0420 HYDRAULIC HEAD
50. [1] 146405-0420 HYDRAULIC HEAD
50. [1] 146405-0420 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [6] 146433-0100 GASKET
55. [6] 146430-0420 DELIVERY-VALVE ASSEMBLY VE5
56. [6] 146432-0000 COMPRESSION SPRING
58. [6] 146440-0220 FITTING
60. [4] 139106-0100 FLAT-HEAD SCREW
67. [1] 146500-0920 GOVERNOR COVER
73. [1] 014110-5440 LOCKING WASHER
74. [1] 013020-5240 UNION NUT
75. [2] 146614-0000 BUSHING
77. [1] 014010-5140 PLAIN WASHER
78. [1] 146530-7320 CONTROL LEVER
95. [1] 146550-0320 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0100 UNION NUT
108. [1] 146570-0000 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146575-0000 SLIDING SLEEVE
116. [1] 146576-0000 SEALING CAP
117/1. [1] 146577-0000 PLUG L1.70
117/1. [1] 146577-0100 PLUG L1.90
117/1. [1] 146577-0200 PLUG L2.10
117/1. [1] 146577-0300 PLUG L2.30
117/1. [1] 146577-0400 PLUG L2.50
117/1. [1] 146577-0500 PLUG L2.70
117/1. [1] 146577-0600 PLUG L2.90
117/1. [1] 146577-0700 PLUG L3.10
117/1. [1] 146577-0800 PLUG L3.30
117/1. [1] 146577-0900 PLUG L3.50
117/1. [1] 146577-1000 PLUG L3.70
117/1. [1] 146577-1100 PLUG L3.90
117/1. [1] 146577-1200 PLUG L4.10
117/1. [1] 146577-1300 PLUG L4.30
117/1. [1] 146577-1400 PLUG L4.50
117/1. [1] 146577-1500 PLUG L4.70
117/1. [1] 146577-1600 PLUG L4.90
117/1. [1] 146577-1700 PLUG L5.10
117/1. [1] 146577-5000 PLUG L1.8
117/1. [1] 146577-5100 PLUG L2.0
117/1. [1] 146577-5200 PLUG L2.2
117/1. [1] 146577-5300 PLUG L2.4
117/1. [1] 146577-5400 PLUG L2.6
117/1. [1] 146577-5500 PLUG L2.8
117/1. [1] 146577-5600 PLUG L3.0
117/1. [1] 146577-5700 PLUG L3.2
117/1. [1] 146577-5800 PLUG L3.4
117/1. [1] 146577-5900 PLUG L3.6
117/1. [1] 146577-6000 PLUG L3.8
117/1. [1] 146577-6100 PLUG L4.0
117/1. [1] 146577-6200 PLUG L4.2
117/1. [1] 146577-6300 PLUG L4.4
117/1. [1] 146577-6400 PLUG L4.6
117/1. [1] 146577-6500 PLUG L4.8
117/1. [1] 146577-6600 PLUG L5.0
117/1. [1] 146877-0400 PLUG
117/1. [1] 146877-0500 PLUG
117/1. [1] 146877-0600 PLUG
117/1. [1] 146877-0700 PLUG
117/1. [1] 146877-4300 PLUG
117/1. [1] 146877-4400 PLUG
117/1. [1] 146877-4500 PLUG
117/1. [1] 146877-4600 PLUG
120. [1] 146579-0020 RETAINING PIN
122. [1] 146580-0800 GOVERNOR SPRING
123. [4] 139106-0200 FLAT-HEAD SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0620 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0020 OVER FLOW VALVE
137. [2] 026512-1840 GASKET
138. [1] 146610-0020 INLET UNION
200. [1] 146206-0100 COILED SPRING
235. [1] 146612-1100 BRACKET
236. [2] 139106-0500 FLAT-HEAD SCREW
239. [1] 023500-5140 PLAIN WASHER
240. [1] 146650-0820 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146658-0720 WIRE
243. [1] 013020-5240 UNION NUT
245. [2] 026512-1840 GASKET
246. [1] 027412-2440 EYE BOLT
800S. [1] 146009-0920 PUMP HOUSING
800S/1/6. [1] 146601-0000 PACKING RING
804S. [1] 146232-0220 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-2420 REPAIR SET
902. [1] 146670-0920 MICROSWITCH
906. [1] 146632-7000 NUMBER PLATE

Include in #2:

104761-0000 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 612 064 9460612064
ZEXEL 104761-0000 1047610000
MAZDA V10113800A v10113800a


Zexel num
Bosch num
Firm num
Name
104761-0000 
9 460 612 064 
V10113800A  MAZDA
INJECTION-PUMP ASSEMBLY
ZB * K

Calibration Data:

Adjustment conditions
(Note)
For Japan: year/month/day (change sequence)   1992/02/21 (3)
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105000-2010
Bosch type code   NP-DN12SD12TT
Nozzle holder   105780-2080
Opening pressure MPa   14.7 14.7 15.19
Opening pressure kgf/cm2   150 150 155
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-840
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   46.1 45.6 46.6
Difference in delivery mm3/st.   3.5
Basic   *
Injection timing adjustment_02
Pump speed r/min   2050 2050 2050
Average injection quantity mm3/st.   15 12 18
Injection timing adjustment_03
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   40.4 38.4 42.4
Injection timing adjustment_04
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   46.1 45.1 47.1
Injection timing adjustment_05
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   42.5 40.5 44.5
Injection timing adjustment_06
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   45 44.5 45.5
Difference in delivery mm3/st.   3.5
Basic   *
Remarks
For Japan  
Injection timing adjustment_07
Pump speed r/min   2050 2050 2050
Average injection quantity mm3/st.   14.6 11.6 17.6
Remarks
For Japan  
Injection timing adjustment_08
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   39.4 37.4 41.4
Remarks
For Japan  
Injection timing adjustment_09
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   45 44 46
Remarks
For Japan  
Injection timing adjustment_10
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   41.5 39.5 43.5
Remarks
For Japan  
Injection quantity adjustment
Pump speed r/min   2050 2050 2050
Average injection quantity mm3/st.   15 12 18
Basic   *
Injection quantity adjustment_02
Pump speed r/min   2150 2150 2150
Average injection quantity mm3/st.   6
Injection quantity adjustment_03
Pump speed r/min   2050 2050 2050
Average injection quantity mm3/st.   14.6 11.6 17.6
Basic   *
Remarks
For Japan  
Injection quantity adjustment_04
Pump speed r/min   2150 2150 2150
Average injection quantity mm3/st.   6
Remarks
For Japan  
Governor adjustment
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   10 8 12
Difference in delivery mm3/st.   2.5
Basic   *
Governor adjustment_02
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   10 8 12
Governor adjustment_03
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9.8 7.8 11.8
Difference in delivery mm3/st.   2.5
Basic   *
Remarks
For Japan  
Governor adjustment_04
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9.8 7.8 11.8
Remarks
For Japan  
Governor adjustment_05
Pump speed r/min   500
Average injection quantity mm3/st.   0 0 0
Remarks
For Japan  
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   67 67
Basic   *
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 65
Basic   *
Remarks
For Japan  
Speed control lever angle
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   0 0 0
Speed control lever angle_02
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   0 0 0
Remarks
For Japan: Magnet OFF  
0000000901
Pump speed r/min   1500 1500 1500
Overflow quantity cm3/min   372 240 504
_02
Pump speed r/min   1500 1500 1500
Overflow quantity cm3/min   396 264 528
Remarks
For Japan  
Stop lever angle
Pump speed r/min   1500 1500 1500
Pressure kPa   608 579 637
Pressure kgf/cm2   6.2 5.9 6.5
Basic   *
Stop lever angle_02
Pump speed r/min   500 500 500
Pressure kPa   225.5 196 255
Pressure kgf/cm2   2.3 2 2.6
Stop lever angle_03
Pump speed r/min   1500 1500 1500
Pressure kPa   608 579 637
Pressure kgf/cm2   6.2 5.9 6.5
Stop lever angle_04
Pump speed r/min   1800 1800 1800
Pressure kPa   715.5 686 745
Pressure kgf/cm2   7.3 7 7.6
Stop lever angle_05
Pump speed r/min   1500 1500 1500
Pressure kPa   598.5 569 628
Pressure kgf/cm2   6.1 5.8 6.4
Basic   *
Remarks
For Japan  
Stop lever angle_06
Pump speed r/min   500 500 500
Pressure kPa   225.5 196 255
Pressure kgf/cm2   2.3 2 2.6
Remarks
For Japan  
Stop lever angle_07
Pump speed r/min   1500 1500 1500
Pressure kPa   598.5 569 628
Pressure kgf/cm2   6.1 5.8 6.4
Remarks
For Japan  
Stop lever angle_08
Pump speed r/min   1800 1800 1800
Pressure kPa   706 677 735
Pressure kgf/cm2   7.2 6.9 7.5
Remarks
For Japan  
0000001101
Pump speed r/min   1500 1500 1500
Timer stroke mm   5.8 5.6 6
Basic   *
_02
Pump speed r/min   1000 1000 1000
Timer stroke mm   2.9 2.3 3.5
_03
Pump speed r/min   1500 1500 1500
Timer stroke mm   5.8 5.5 6.1
_04
Pump speed r/min   1800 1800 1800
Timer stroke mm   7.35 6.9 7.8
_05
Pump speed r/min   1500 1500 1500
Timer stroke mm   5.7 5.5 5.9
Basic   *
Remarks
For Japan  
_06
Pump speed r/min   1000 1000 1000
Timer stroke mm   2.8 2.2 3.4
Remarks
For Japan  
_07
Pump speed r/min   1500 1500 1500
Timer stroke mm   5.7 5.4 6
Remarks
For Japan  
_08
Pump speed r/min   1800 1800 1800
Timer stroke mm   7.35 6.9 7.8
Remarks
For Japan  
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   6 5.9 6.1
MS dimension mm   1.8 1.7 1.9
Pre-stroke mm   0.1 0.08 0.12
Control lever angle alpha deg.   20 16 24
Control lever angle beta deg.   43 38 48

Test data Ex:

0000001801 MAGNET VALVE SELECTION

Test data 104761-0000
Magnet valve specifications A = pump proper number B = magnet valve C = maximum applied voltage D = inspection voltage
----------

----------
A1=104761-000* A2=104761-0002 A3=104761-0003 A4=104761-008* A5=104761-005* A6=104761-006* C1=16V,D1=24~26V C2=16V,D2=24~26V C3=16V,D3=24~26V C4=16V,D4=24~26V C5=8V,D5=12~14V C6=8V,D6=12~14V




Information:

Gauges provide indications of engine performance. Be sure they are in good working order. You can determine what is the "normal" operating range by observing the gauges over a period of time.Noticeable changes in gauge readings indicate potential gauge or engine problems. This also applies to gauge readings that have changed significantly, but are still within specifications. The cause of any sudden or significant change in gauge readings should be determined and corrected. Contact your Caterpillar dealer for assistance as needed. Oil Pressure - Indicates engine oil pressure. The oil pressure should be greatest after starting a cold engine. Oil pressure should read between 240 and 480 kPa (35 and 70 psi) when: the engine is running at rated engine speed with SAE 10W30 oil, and at operating temperature. A lower pressure is normal at low idling speed.
Engine damage can result if the engine is operated with no oil pressure gauge reading. If no pressure is indicated, stop the engine.
Jacket Water Temperature - Indicates engine coolant temperature. It should normally indicate between 77°C (170°F) and 98°C (209°F). Higher temperatures may occur under certain conditions. Maximum allowable temperature is 99°C (210°F) with the cooling system pressurized. Ammeter - Indicates the amount of charge or discharge in the battery charging circuit. Normal operation of the indicator should be slightly to the positive (right) side of "0" (zero).Check the charging system for malfunction if, during operation, the indicator is constantly to the negative (left) side of "0" (zero) or shows excessive charge. Tachometer - Indicates engine rpm (speed). The engine can be operated at high idle without damage, but should not be allowed to overspeed. Overspeeding can seriously damage your engine.
Do not exceed "bare engine high idle" rpm in any situation.
Fuel Level - Indicates fuel level in the fuel tank. The electrically operated fuel level gauge registers only when the START/STOP (ignition key) switch is ON. Fuel Pressure - Indicates fuel pressure to the injection pump. The indicator should register in the NORMAL (green) range.If the indicator moves to the OUT position or registers below 160 kPa (23 psi) when equipped with a numerical gauge, the engine will not operate properly. In most cases this is caused by a plugged fuel filter. Service Hour Meter - Indicates the total number of service meter units or clock hours the engine has operated.

Have questions with 104761-0000?





Group cross 104761-0000 ZEXEL

Mazda 

104761-0000  
9 460 612 064 
V10113800A 
INJECTION-PUMP ASSEMBLY
ZB
104761-0001  

104761-0003 
 
V10113800B 
INJECTION-PUMP ASSEMBLY
ZB

Dpico 

104761-0002  
 
 
INJECTION-PUMP ASSEMBLY
ZB

Mazda 

104761-0002  

104761-0003 
9 460 614 754 
V10113800C 
INJECTION-PUMP ASSEMBLY
ZB
104761-0003  
9 460 614 870 
 
INJECTION-PUMP ASSEMBLY
Back to top