Fuel injectors
  1. Home
  2. injection
  3. #1047604374

104760-4374 ZEXEL 9 460 611 473 BOSCH INJECTION-PUMP ASSEMBLY 9460611473 1047604374 1670010d63


 

Information injection-pump assembly

BOSCH 9 460 611 473 9460611473
ZEXEL 104760-4374 1047604374
NISSAN-DIESEL 1670010D63 1670010d63
104760-4374 INJECTION-PUMP ASSEMBLY
Rating:
12
Buy INJECTION-PUMP ASSEMBLY 104760-4374 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104760-4374
1. _
2. FUEL INJECTION PUMP 104660-4374
3. NUMBER PLATE 146973-0300
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1340
8. Nozzle and Holder 16600-09D60
9. Open Pre:MPa(Kqf/cm2) 12.7{130}
10. NOZZLE-HOLDER 105078-0050
11. NOZZLE 105007-1130

Scheme ###:

PACKING RING
1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0420 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0100 PLAIN WASHER
20. [1] 146210-5020 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0200 SLOTTED WASHER
29. [1] 146221-0920 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-5820 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-2800 COMPRESSION SPRING
34B. [1] 146312-2900 COMPRESSION SPRING
34C. [1] 146312-3000 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM
48/1. [1] 146690-5900 SHIM
48/1. [1] 146690-6000 SHIM
48/1. [1] 146690-6100 SHIM
48/1. [1] 146690-6200 SHIM
48/1. [1] 146690-6300 SHIM
48/1. [1] 146690-6400 SHIM
48/1. [1] 146690-6500 SHIM
48/1. [1] 146690-6600 SHIM
48/1. [1] 146690-6700 SHIM
48/1. [1] 146690-6800 SHIM
48/1. [1] 146690-6900 SHIM
48/1. [1] 146690-7000 SHIM
48/1. [1] 146690-7100 SHIM
48/1. [1] 146690-7200 SHIM
48/1. [1] 146690-7300 SHIM
48/1. [1] 146690-7400 SHIM
48/1. [1] 146690-7500 SHIM
48/1. [1] 146690-7800 SHIM
49. [2] 146234-0020 GUIDE PIN
50. [1] 146408-0620 HYDRAULIC HEAD
50. [1] 146408-0620 HYDRAULIC HEAD
50. [1] 146408-0620 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [6] 146433-0100 GASKET D12&6.4T1.00
55. [6] 146430-2120 DELIVERY-VALVE ASSEMBLY
56. [6] 146432-0000 COMPRESSION SPRING
58. [6] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
67. [1] 146706-6120 ANEROID CAPSULE
67/1. [1] 146508-3521 GOVERNOR COVER
67/2. [1] 146515-0220 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [1] 139310-0200 PLAIN WASHER
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-6800 FLAT-HEAD SCREW
67/23. [1] 146928-7500 BRACKET
67/24. [1] 139006-5700 BLEEDER SCREW
67/31. [1] 146710-0400 BUSHING
67/32. [1] 146602-1800 PLAIN WASHER D31.3&19T1
67/33. [1] 146716-0200 UNION NUT
67/34/1. [1] 146713-3000 ADJUSTING PIN L24.6
67/34/1. [1] 146713-3100 ADJUSTING PIN L24.8
67/34/1. [1] 146713-3200 ADJUSTING PIN L25.0
67/34/1. [1] 146713-3300 ADJUSTING PIN L25.2
67/34/1. [1] 146713-3400 ADJUSTING PIN L25.4
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-0100 BUSHING
67/38. [1] 139506-0200 GASKET D8.9&6.8T1.00
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET D15.4&12.2T1.50
67/41. [1] 146713-2400 ADJUSTING PIN
67/47. [1] 146717-0200 COILED SPRING
67/49. [1] 146721-0700 COVER
67/54. [2] 139006-4600 BLEEDER SCREW
67/55. [2] 139006-4400 BLEEDER SCREW
67/56. [1] 146723-0300 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET D9.9&6.2T1
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0400 CAPSULE
67/64. [1] 146929-0620 BRACKET
67/70. [1] 016520-6010 O-RING
67/71. [1] 146714-0100 SLOTTED WASHER
67/72. [1] 016010-0920 LOCKING WASHER
67/73. [1] 146715-0120 BELLOWS
67/74/1. [0] 146603-3700 SHIM T0.20
67/74/1. [0] 146603-3800 SHIM T0.30
67/74/1. [0] 146603-3900 SHIM T0.50
67/74/1. [0] 146603-4000 SHIM T0.70
67/74/1. [0] 146603-4100 SHIM T1.00
67/74/1. [0] 146603-4200 SHIM T1.50
67/78. [1] 146600-4400 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-4600 THREADED PIN
67/201B. [1] 146545-4700 THREADED PIN
67/201C. [1] 146545-4800 THREADED PIN
67/202. [1] 146598-5000 UNION NUT
67/203. [1] 146600-1200 O-RING
67/204. [1] 146545-4500 DAMPER
72. [1] 146539-1120 CONTROL LEVER
72B. [1] 146539-1220 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER
75. [1] 146621-0700 UNION NUT
95. [1] 146865-1820 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146575-2000 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
120. [1] 146579-3620 RETAINING PIN
122. [1] 146580-0900 GOVERNOR SPRING
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-3920 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-1000 UNION NUT
147. [1] 146600-5000 O-RING
200. [1] 146206-0100 COILED SPRING
214. [1] 146542-1400 BUSHING
216. [1] 146542-1500 BUSHING
217. [1] 146542-2600 SLOTTED WASHER
218. [1] 146592-2400 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-2300 COILED SPRING
221. [1] 146925-6920 BRACKET
222. [2] 139006-4600 BLEEDER SCREW
230. [1] 146933-7720 BRACKET
231. [1] 139006-4400 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146688-0420 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146658-6420 WIRE
243. [1] 146621-1000 UNION NUT
244. [1] 020118-1440 BLEEDER SCREW
245. [2] 139512-0500 GASKET
246. [1] 027412-2440 EYE BOLT
247. [1] 146665-1220 PIPE
251. [1] 014010-8140 PLAIN WASHER D18&8.5T1.6
310. [1] 146683-1721 POTENTCIOMETER
310/2. [1] 146661-0401 BOOT
310/3. [2] 139104-0400 FLAT-HEAD SCREW
310/4. [1] 146620-2900 FLAT-HEAD SCREW
310/5. [1] 146621-0500 UNION NUT
310/6. [1] 146614-2300 JOINT CONNECTION
410. [1] 014020-6140 PLAIN WASHER
411. [1] 146598-6300 CAP NUT
412. [1] 146598-6400 ADAPTOR
800S. [1] 146019-4420 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5820 ROLLER SET
835S. [1] 146598-5521 CAP
836S. [1] 146598-6720 CAP
837S. [1] 146598-5511 CAP
838S. [1] 146598-6710 CAP
847S. [1] 146683-8910 POTENTCIOMETER
906. [1] 146973-0300 NAMEPLATE

Include in #2:

104760-4374 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 611 473 9460611473
ZEXEL 104760-4374 1047604374
NISSAN-DIESEL 1670010D63 1670010d63


Zexel num
Bosch num
Firm num
Name
104760-4374 
9 460 611 473 
1670010D63  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD42T K 11CK INJECTION PUMP ASSY VE6 VE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T OFF.   OFF
Injection timing adjustment
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   57.6 57.1 58.1
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   44 40.5 47.5
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   51.7 49.2 54.2
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   57.6 56.6 58.6
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1650 1650 1650
Average injection quantity mm3/st.   64.7 61.2 68.2
Oil temperature degC   50 48 52
Injection timing adjustment_06
Pump speed r/min   1750 1750 1750
Average injection quantity mm3/st.   61.5 60.6 67.6
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   2125 2125 2125
Average injection quantity mm3/st.   15.9 13.9 17.9
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   1925 1925 1925
Average injection quantity mm3/st.   56.8 51.8 61.8
Oil temperature degC   50 48 52
Injection quantity adjustment_03
Pump speed r/min   2125 2125 2125
Average injection quantity mm3/st.   15.9 12.9 18.9
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_04
Pump speed r/min   2350 2350 2350
Average injection quantity mm3/st.   10
Oil temperature degC   52 50 54
Governor adjustment
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   13.9 11.9 15.9
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   13.9 11.4 16.4
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 50 80
Basic   *
Oil temperature degC   48 46 50
Remarks
Full  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 50 80
Oil temperature degC   48 46 50
Remarks
Full  
Speed control lever angle
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
Speed control lever angle_02
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   1100 1100 1100
Overflow quantity with S/T ON cm3/min   460 330 590
Oil temperature degC   50 48 52
Remarks
Without an O-ring  
Stop lever angle
Pump speed r/min   1100 1100 1100
Pressure with S/T OFF kPa   363 334 392
Pressure with S/T OFF kgf/cm2   3.7 3.4 4
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF  
Stop lever angle_02
Pump speed r/min   1100 1100 1100
Pressure with S/T OFF kPa   363 324 402
Pressure with S/T OFF kgf/cm2   3.7 3.3 4.1
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF  
Stop lever angle_03
Pump speed r/min   1500 1500 1500
Pressure with S/T OFF kPa   451 412 490
Pressure with S/T OFF kgf/cm2   4.6 4.2 5
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1100 1100 1100
Timer stroke with S/T ON mm   4.2 3.8 4.6
Timer stroke with S/T OFF mm   1.8 1.6 2
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF  
_02
Pump speed r/min   800 800 800
Timer stroke with S/T OFF mm   0.9
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Timer stroke with S/T ON mm   4.2 3.7 4.7
Timer stroke with S/T OFF mm   1.8 1.5 2.1
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF  
_04
Pump speed r/min   1500 1500 1500
Timer stroke with S/T OFF mm   3.6 3.1 4.1
Oil temperature degC   50 48 52
_05
Pump speed r/min   2000 2000 2000
Timer stroke with S/T OFF mm   5.7 5.2 6.1
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001501
Pump speed r/min   1100 1100 1100
Height m   2000 2000 2000
Atmospheric pressure difference kPa   -21.9 -22.6 -21.2
Atmospheric pressure difference mmHg   -164 -169 -159
Average injection quantity mm3/st.   51.8 50.3 53.3
Decrease qty mm3/st.   5.8 5.8 5.8
Decrease rate %   10.1 10.1 10.1
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1100 1100 1100
Height m   0 0 0
Atmospheric pressure difference kPa   0 0 0
Atmospheric pressure difference mmHg   0 0 0
Average injection quantity mm3/st.   57.6 56.6 58.6
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Height m   500 500 500
Atmospheric pressure difference kPa   -5.9 -9.2 -2.6
Atmospheric pressure difference mmHg   -44 -69 -19
Average injection quantity mm3/st.   57.6 57.6 57.6
Oil temperature degC   50 48 52
_04
Pump speed r/min   1100 1100 1100
Height m   2000 2000 2000
Atmospheric pressure difference kPa   -21.9 -22.6 -21.2
Atmospheric pressure difference mmHg   -164 -169 -159
Average injection quantity mm3/st.   51.8 49.8 53.8
Basic   *
Oil temperature degC   50 48 52
_05
Pump speed r/min   1100 1100 1100
Height m   4000 4000 4000
Atmospheric pressure difference kPa   -39.7 -40.4 -39
Atmospheric pressure difference mmHg   -298 -303 -293
Average injection quantity mm3/st.   40.2 40.2 40.2
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   6.64 6.54 6.74
MS dimension mm   0.9 0.8 1
Control lever angle alpha deg.   55.5 51.5 59.5
Control lever angle beta deg.   34 29 39

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104760-4374
A:Potentiometer standards B:ON, OFF switch standard N:Pump speed Q:Injection quantity V:Output voltage C:Control lever angle C1:Full-speed C2:Idle E:Adjusting point G:ON-->OFF D:OFF-->ON Vi:Applied voltage
----------

----------
V1=1.6+-0.03V V2=(7.26+-0.9V) C3=(4.9+-2.5deg) C4=(19.4+-4deg) Vi=10V




Information:


TERMINATION DATE
30Sep2015
PROBLEM
The existing 375-5244 or early production 379-0150 common rail fuel injection pumps may fail on certain 336E Excavators. If the existing common rail fuel injection pump fails the engine may exhibit no start, hard starting or loss of power.
AFFECTED PRODUCT
Model Identification Number
336E L BZY00328, 409, 432, 434, 440, 459, 534, 536, 792, 875, 1266, 1319, 1321, 1335
PARTS NEEDED
Qty
Part Number Description
1 6V8260 SEAL-O-RING
1 2287102 SEAL-O-RING-STOR
1 3790150 PUMP GP-FUEL
1 4154991 VALVE AS-RELIEF
1 4286096 KIT-F PUMP LINE
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
1. Refer to Special Instruction, REHS5023, "Replacing the Fuel Injection Pump on Certain C9.3 Engines". Replace the existing 375-5244 or early production 379-0150 common rail fuel injection pump with the new production 379-0150 common rail fuel injection pump and new gasket 6V-8260. Install a new 356-5214 fuel line from the common rail fuel injection pump to the fuel rail.
2. Refer to C9.3 Disassembly and Assembly, KENR8149 "Engines for Caterpillar Built Machines". Replace the prior 362-0770 Pressure Relief Valve with 415-4991 Pressure Relief Valve, and 228-7102 O-ring.
3. Refer to Service Magazine, SEPD1928, "An Improved Fuel Injection Pump Group Is Used on Certain C9.3 Machine Engines", in order to record the common rail fuel injection pump serial number. This serial number must be entered into the containment service letter claim story.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-5000 hrs,
0-48 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 12.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Have questions with 104760-4374?





Group cross 104760-4374 ZEXEL

Nissan-Diesel 

104760-4370  

104760-4371 
 
1670010D61 
INJECTION-PUMP ASSEMBLY
TD42T
104760-4371  
 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

104760-4372  

104760-4373 
9 460 610 845 
1670010D62 
INJECTION-PUMP ASSEMBLY
TD42T
104760-4373  

104760-4374 
9 460 611 683 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

104760-4374  
9 460 611 473 
1670010D63 
INJECTION-PUMP ASSEMBLY
TD42T
Back to top