104760-2020 ZEXEL 9 460 610 082 BOSCH INJECTION-PUMP ASSEMBLY 9460610082 1047602020 16700s8200

Information injection-pump assembly

BOSCH 9 460 610 082 9460610082

ZEXEL 104760-2020 1047602020

NISSAN 16700S8200 16700s8200

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104760-2020 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104760-2020
1.	_
2.	FUEL INJECTION PUMP	104660-2010
3.	NUMBER PLATE	146632-3700
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105111-1281
8.	Nozzle and Holder	16600-V0725
9.	Open Pre:MPa(Kqf/cm2)	12.7{130}
10.	NOZZLE-HOLDER	105041-1121
11.	NOZZLE	105000-1760

Scheme ###:

1/6.	[1]	146601-0100	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP D20
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0100	DRIVE SHAFT
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-0020	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146221-0120	CAM PLATE '01'Y490
30.	[1]	146600-0800	O-RING
31.	[1]	146300-1100	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-0200	COMPRESSION SPRING K=2.5
35.	[1]	029998-0710	SHIM
35/1.	[1]	146603-0700	SHIM
35/1.	[1]	146603-0800	SHIM
35/1.	[1]	146603-0900	SHIM
35/1.	[1]	146603-1000	SHIM
35/1.	[1]	146603-1100	SHIM
35/1.	[1]	146603-3600	SHIM
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0000	COVER
38.	[2]	139106-0000	FLAT-HEAD SCREW
39.	[1]	146310-0100	COVER
40.	[2]	139106-0000	FLAT-HEAD SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0000	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48.	[2]	029998-0570	SHIM
48/1.	[1]	146603-0000	SHIM
48/1.	[1]	146603-0100	SHIM
48/1.	[1]	146603-0200	SHIM
48/1.	[1]	146603-0300	SHIM
48/1.	[1]	146603-0400	SHIM
48/1.	[1]	146603-0500	SHIM
48/1.	[1]	146603-0600	SHIM
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146407-0020	HYDRAULIC HEAD
50.	[1]	146407-0020	HYDRAULIC HEAD
50.	[1]	146407-0020	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52.	[1]	029998-0300	SHIM
52/1.	[1]	146420-0000	SHIM
52/1.	[1]	146420-0100	SHIM
52/1.	[1]	146420-0200	SHIM
52/1.	[1]	146420-0300	SHIM
52/1.	[1]	146420-0400	SHIM
52/1.	[1]	146420-0500	SHIM
52/1.	[1]	146420-0600	SHIM
52/1.	[1]	146420-0700	SHIM
52/1.	[1]	146420-0800	SHIM
52/1.	[1]	146420-0900	SHIM
52/1.	[1]	146420-1000	SHIM
52/1.	[1]	146420-1100	SHIM
52/1.	[1]	146420-1200	SHIM
52/1.	[1]	146420-1300	SHIM
52/1.	[1]	146420-1400	SHIM
52/1.	[1]	146420-1500	SHIM
52/1.	[1]	146420-1600	SHIM
52/1.	[1]	146420-1700	SHIM
52/1.	[1]	146420-1800	SHIM
52/1.	[1]	146420-1900	SHIM
52/1.	[1]	146420-2000	SHIM
52/1.	[1]	146420-2100	SHIM
52/1.	[1]	146420-2200	SHIM
52/1.	[1]	146420-2300	SHIM
52/1.	[1]	146420-2400	SHIM
52/1.	[1]	146420-2500	SHIM
52/1.	[1]	146420-2600	SHIM
52/1.	[1]	146420-2700	SHIM
52/1.	[1]	146420-2800	SHIM
52/1.	[1]	146420-2900	SHIM
52/1.	[1]	146420-3000	SHIM
52/1.	[1]	146420-3100	SHIM
52/1.	[1]	146420-3200	SHIM
52/1.	[1]	146420-3300	SHIM
52/1.	[1]	146420-3400	SHIM
52/1.	[1]	146420-3500	SHIM
52/1.	[1]	146420-3600	SHIM
52/1.	[1]	146420-3700	SHIM
52/1.	[1]	146420-3800	SHIM
52/1.	[1]	146420-3900	SHIM
52/1.	[1]	146420-4000	SHIM
52/1.	[1]	146420-4100	SHIM
52/1.	[1]	146420-4200	SHIM
52/1.	[1]	146420-4300	SHIM
52/1.	[1]	146420-4400	SHIM
52/1.	[1]	146420-4500	SHIM
52/1.	[1]	146420-4600	SHIM
52/1.	[1]	146420-4700	SHIM
52/1.	[1]	146420-4800	SHIM
52/1.	[1]	146420-4900	SHIM
52/1.	[1]	146420-5000	SHIM
52/1.	[1]	146420-5100	SHIM
52/1.	[1]	146420-5200	SHIM
52/1.	[1]	146420-5300	SHIM
52/1.	[1]	146420-5400	SHIM
52/1.	[1]	146420-5500	SHIM
52/1.	[1]	146420-5600	SHIM
52/1.	[1]	146420-5700	SHIM
52/1.	[1]	146420-5800	SHIM
54.	[6]	146433-0100	GASKET
55.	[6]	146430-0020	DELIVERY-VALVE ASSEMBLY 'VE1' VR35
56.	[6]	146432-0000	COMPRESSION SPRING K=0.48
58.	[6]	146440-0220	FITTING D0.45 L=50
60.	[4]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146502-0420	GOVERNOR COVER
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	029240-6010	UNION NUT
67/15.	[1]	146526-1100	FLAT-HEAD SCREW
67/16.	[1]	146526-0500	FLAT-HEAD SCREW
68.	[1]	146510-0520	CONTROL SHAFT R=10 S R
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146530-5520	CONTROL LEVER ' 55'
72B.	[1]	146530-5620	CONTROL LEVER ' 56'
73.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
75.	[1]	013020-6040	UNION NUT
87.	[1]	139308-0300	PLAIN WASHER
88.	[1]	146545-0300	THREADED PIN
88B.	[1]	146545-0400	THREADED PIN
88C.	[1]	146545-0500	THREADED PIN
90.	[1]	139208-0100	UNION NUT
91.	[1]	146600-1200	O-RING
92.	[1]	146600-1000	SEAL RING
95.	[1]	146561-0121	FULCRUM LEVER I=2.2
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET
106.	[2]	146588-0000	COILED SPRING
107.	[1]	146569-0100	UNION NUT
108.	[1]	146570-0000	GOVERNOR SHAFT L
109.	[1]	146600-0400	O-RING
110.	[1]	029998-4130	SHIM
110/1.	[1]	146571-0000	SHIM
110/1.	[1]	146571-0100	SHIM
110/1.	[1]	146571-0200	SHIM
110/1.	[1]	146571-0300	SHIM
110/1.	[1]	146571-0400	SHIM
110/1.	[1]	146571-0500	SHIM
110/1.	[1]	146571-0600	SHIM
110/1.	[1]	146571-0700	SHIM
110/1.	[1]	146571-0800	SHIM
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-0500	SLIDING SLEEVE D2.0
116.	[1]	146576-0000	SEALING CAP
117.	[1]	029998-5510	PLUG SKH51
117/1.	[1]	146577-1800	PLUG
117/1.	[1]	146577-1900	PLUG
117/1.	[1]	146577-2000	PLUG
117/1.	[1]	146577-2100	PLUG
117/1.	[1]	146577-2200	PLUG
117/1.	[1]	146577-2300	PLUG
117/1.	[1]	146577-2400	PLUG
117/1.	[1]	146577-2500	PLUG
117/1.	[1]	146577-2600	PLUG
117/1.	[1]	146577-2700	PLUG
117/1.	[1]	146577-2800	PLUG
117/1.	[1]	146577-2900	PLUG
117/1.	[1]	146577-3000	PLUG
117/1.	[1]	146577-3100	PLUG
117/1.	[1]	146577-3200	PLUG
117/1.	[1]	146577-3300	PLUG
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE D14
130/2.	[1]	026508-1140	GASKET
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE '02'4XD1.6K=1.5
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0220	OVER FLOW VALVE
137.	[2]	139512-0200	GASKET
138.	[1]	146610-1820	INLET UNION
200.	[1]	146206-0100	COILED SPRING
206.	[1]	013131-4140	UNION NUT
207.	[1]	029321-4050	LOCKING WASHER
217.	[1]	146541-0100	SLOTTED WASHER
218.	[1]	146587-0800	COILED SPRING
219.	[1]	146541-0200	ANGLE PIECE
220.	[1]	146587-1100	COILED SPRING
221.	[1]	146613-3320	BRACKET
239.	[1]	023500-5140	PLAIN WASHER
240.	[1]	146650-0720	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146657-0100	TERMINAL
243.	[1]	013020-5240	UNION NUT
245.	[3]	139512-0200	GASKET
245.	[3]	139512-0200	GASKET
246.	[1]	139812-0500	EYE BOLT
247.	[1]	146610-1920	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
275.	[1]	146612-0400	BRACKET
276.	[2]	010010-1640	BLEEDER SCREW
800S.	[1]	146009-0520	PUMP HOUSING
800S/1.	[1]	146005-0320	PUMP HOUSING 3K D20 LL R
800S/1/6.	[1]	146601-0100	PACKING RING
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
906.	[1]	146632-3700	NUMBER PLATE

Include in #2:

104760-2020 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

104760-2020
104760-2021

9 460 610 082

16700S8200 NISSAN

INJECTION-PUMP ASSEMBLY
LD28 *

Information:

Image1.1.1
5. Attach a hose to the other end of the fuel rail and hold the free end of the hose in a cup/bucket of water. Hose shown is a JIC 37o ?6 hose. Refer to Illustration 1.2.1
Image1.2.1
6. Pressurize the cooling system with compressed air and regulate pressure between 5-15 psi.
Do Not Exceed 15 psi or Cooling System Damage Can Result.
7. Submerse the hose in a cup/bucket of water.
8. Monitor for 10 minutes and check for a steady rate of air bubbles coming out of the hose that is submersed in the cup/bucket of water.
9. If steady stream of air is present, replace the cylinder head, coolant regulators, and both 030-7937 port connectors. Depending on the application, you will need to replace some cooling system seals. (List of seals by application to be included)
10. Once the cylinder heads have been replaced pressure test the head again using the same procedure. Once this has been completed the cooling system should be flushed using instructions listed below.
Cleaning the Cooling System
1. Drain all of the coolant form cooling system.
2. Fill the cooling system with clean water.
3. Start engine and run it until the thermostat opens.
4. Add two cups of non-foaming liquid automatic dish washer soap.
Note: Do not use plain dish soap. Aeration of the cooling system and resultant damage could occur.
5. After the soap has bee added run engine for approximately twenty minutes. Check to see if the fuel is breaking up.
6. If the fuel is still not breaking up than add two more cups of soap and run for 10 minutes. Drain mixture from cooling system.
7. Fill cooling system with clean water and check surface for fuel. If fuel is present, repeat steps 3 through 7. When water is clear, drain and rinse the cooling system one more time. Then add coolant and conditioner.