Information injection-pump assembly
ZEXEL
104749-6391
1047496391

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104749-6391 |
1. | _ | |
2. | FUEL INJECTION PUMP | |
3. | NUMBER PLATE | 146639-8500 |
4. | _ | 146672-2020 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105158-2090 |
8. | Nozzle and Holder | 8-94418-161-0 |
9. | Open Pre:MPa(Kqf/cm2) | 13.2{135} |
10. | NOZZLE-HOLDER | 105088-1042 |
11. | NOZZLE | 105007-1061 |
Scheme ###:
1/6. | [1] | 146601-0100 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP D20 |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12/1. | [1] | 146200-0500 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0001 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-0120 | ROLLER SET MMC C=1.2 |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0020 | CAM PLATE '00'SK3277 |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-0600 | PUMP PLUNGER ' 6' 5-10 |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-0100 | COMPRESSION SPRING K=2.25 |
35/1. | [1] | 146603-0700 | SHIM |
35/1. | [1] | 146603-0800 | SHIM |
35/1. | [1] | 146603-0900 | SHIM |
35/1. | [1] | 146603-1000 | SHIM |
35/1. | [1] | 146603-1100 | SHIM |
35/1. | [1] | 146603-3600 | SHIM |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0000 | COVER |
38. | [2] | 139106-0000 | FLAT-HEAD SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 139106-0000 | FLAT-HEAD SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0000 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM |
48/1. | [1] | 146603-0100 | SHIM |
48/1. | [1] | 146603-0200 | SHIM |
48/1. | [1] | 146603-0300 | SHIM |
48/1. | [1] | 146603-0400 | SHIM |
48/1. | [1] | 146603-0500 | SHIM |
48/1. | [1] | 146603-0600 | SHIM |
48/1. | [1] | 146690-1400 | SHIM |
48/1. | [1] | 146690-1500 | SHIM |
48/1. | [1] | 146690-1600 | SHIM |
48/1. | [1] | 146690-1700 | SHIM |
48/1. | [1] | 146690-1800 | SHIM |
48/1. | [1] | 146690-1900 | SHIM |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146400-8420 | HYDRAULIC HEAD D9 2X2.2 A0.6 |
50. | [1] | 146400-8420 | HYDRAULIC HEAD D9 2X2.2 A0.6 |
50. | [1] | 146400-8420 | HYDRAULIC HEAD D9 2X2.2 A0.6 |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM |
52/1. | [1] | 146420-0100 | SHIM |
52/1. | [1] | 146420-0200 | SHIM |
52/1. | [1] | 146420-0300 | SHIM |
52/1. | [1] | 146420-0400 | SHIM |
52/1. | [1] | 146420-0500 | SHIM |
52/1. | [1] | 146420-0600 | SHIM |
52/1. | [1] | 146420-0700 | SHIM |
52/1. | [1] | 146420-0800 | SHIM |
52/1. | [1] | 146420-0900 | SHIM |
52/1. | [1] | 146420-1000 | SHIM |
52/1. | [1] | 146420-1100 | SHIM |
52/1. | [1] | 146420-1200 | SHIM |
52/1. | [1] | 146420-1300 | SHIM |
52/1. | [1] | 146420-1400 | SHIM |
52/1. | [1] | 146420-1500 | SHIM |
52/1. | [1] | 146420-1600 | SHIM |
52/1. | [1] | 146420-1700 | SHIM |
52/1. | [1] | 146420-1800 | SHIM |
52/1. | [1] | 146420-1900 | SHIM |
52/1. | [1] | 146420-2000 | SHIM |
52/1. | [1] | 146420-2100 | SHIM |
52/1. | [1] | 146420-2200 | SHIM |
52/1. | [1] | 146420-2300 | SHIM |
52/1. | [1] | 146420-2400 | SHIM |
52/1. | [1] | 146420-2500 | SHIM |
52/1. | [1] | 146420-2600 | SHIM |
52/1. | [1] | 146420-2700 | SHIM |
52/1. | [1] | 146420-2800 | SHIM |
52/1. | [1] | 146420-2900 | SHIM |
52/1. | [1] | 146420-3000 | SHIM |
52/1. | [1] | 146420-3100 | SHIM |
52/1. | [1] | 146420-3200 | SHIM |
52/1. | [1] | 146420-3300 | SHIM |
52/1. | [1] | 146420-3400 | SHIM |
52/1. | [1] | 146420-3500 | SHIM |
52/1. | [1] | 146420-3600 | SHIM |
52/1. | [1] | 146420-3700 | SHIM |
52/1. | [1] | 146420-3800 | SHIM |
52/1. | [1] | 146420-3900 | SHIM |
52/1. | [1] | 146420-4000 | SHIM |
52/1. | [1] | 146420-4100 | SHIM |
52/1. | [1] | 146420-4200 | SHIM |
52/1. | [1] | 146420-4300 | SHIM |
52/1. | [1] | 146420-4400 | SHIM |
52/1. | [1] | 146420-4500 | SHIM |
52/1. | [1] | 146420-4600 | SHIM |
52/1. | [1] | 146420-4700 | SHIM |
52/1. | [1] | 146420-4800 | SHIM |
52/1. | [1] | 146420-4900 | SHIM |
52/1. | [1] | 146420-5000 | SHIM |
52/1. | [1] | 146420-5100 | SHIM |
52/1. | [1] | 146420-5200 | SHIM |
52/1. | [1] | 146420-5300 | SHIM |
52/1. | [1] | 146420-5400 | SHIM |
52/1. | [1] | 146420-5500 | SHIM |
52/1. | [1] | 146420-5600 | SHIM |
52/1. | [1] | 146420-5700 | SHIM |
52/1. | [1] | 146420-5800 | SHIM |
54. | [4] | 146433-0100 | GASKET |
55. | [4] | 146430-0120 | DELIVERY-VALVE ASSEMBLY 'VE2' VR25 |
56. | [4] | 146432-0000 | COMPRESSION SPRING K=0.48 |
58. | [4] | 146440-0120 | FITTING D0.45 L=55 |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146502-9620 | GOVERNOR COVER |
67/13. | [1] | 013020-6040 | UNION NUT |
67/14. | [1] | 029240-6010 | UNION NUT |
67/15. | [1] | 146526-1800 | BLEEDER SCREW |
67/16. | [1] | 146526-0200 | BLEEDER SCREW |
67/23. | [1] | 146628-4620 | BRACKET |
67/23/2. | [1] | 146616-9720 | CONTROL LEVER |
67/23/3. | [1] | 146620-1400 | FLAT-HEAD SCREW |
67/23/4. | [1] | 013020-6040 | UNION NUT |
67/23/6. | [1] | 146587-7500 | COILED SPRING |
67/23/9. | [1] | 014110-5440 | LOCKING WASHER |
67/23/10. | [1] | 013020-5240 | UNION NUT |
67/24. | [2] | 139106-0000 | FLAT-HEAD SCREW |
67/26. | [1] | 146626-5420 | BRACKET |
67/64. | [1] | 146626-0720 | BRACKET |
68. | [1] | 146510-9820 | CONTROL SHAFT R=10 S R |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146535-0620 | CONTROL LEVER '506' |
72B. | [1] | 146535-0820 | CONTROL LEVER '507' |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT |
87. | [1] | 139308-0300 | PLAIN WASHER |
88. | [1] | 146545-1620 | THREADED PIN |
90. | [1] | 139208-0100 | UNION NUT |
91. | [1] | 146600-1200 | O-RING |
92. | [1] | 146600-1000 | SEAL RING |
95. | [1] | 146551-4720 | FULCRUM LEVER I=2.2 SKH5 |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET |
106. | [2] | 146588-0000 | COILED SPRING |
107. | [1] | 146569-0100 | UNION NUT |
108. | [1] | 146570-0320 | GOVERNOR SHAFT L-L/T |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM |
110/1. | [1] | 146571-0100 | SHIM |
110/1. | [1] | 146571-0200 | SHIM |
110/1. | [1] | 146571-0300 | SHIM |
110/1. | [1] | 146571-0400 | SHIM |
110/1. | [1] | 146571-0500 | SHIM |
110/1. | [1] | 146571-0600 | SHIM |
110/1. | [1] | 146571-0700 | SHIM |
110/1. | [1] | 146571-0800 | SHIM |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER |
115. | [1] | 146575-3200 | SLIDING SLEEVE '32' D2.0 2-0. |
116. | [1] | 146576-0000 | SEALING CAP |
117/1. | [1] | 146577-1800 | PLUG |
117/1. | [1] | 146577-1900 | PLUG |
117/1. | [1] | 146577-2000 | PLUG |
117/1. | [1] | 146577-2100 | PLUG |
117/1. | [1] | 146577-2200 | PLUG |
117/1. | [1] | 146577-2300 | PLUG |
117/1. | [1] | 146577-2400 | PLUG |
117/1. | [1] | 146577-2500 | PLUG |
117/1. | [1] | 146577-2600 | PLUG |
117/1. | [1] | 146577-2700 | PLUG |
117/1. | [1] | 146577-2800 | PLUG |
117/1. | [1] | 146577-2900 | PLUG |
117/1. | [1] | 146577-3000 | PLUG |
117/1. | [1] | 146577-3100 | PLUG |
117/1. | [1] | 146577-3200 | PLUG |
117/1. | [1] | 146577-3300 | PLUG |
117/1. | [1] | 146577-6700 | PLUG |
117/1. | [1] | 146577-6800 | PLUG |
117/1. | [1] | 146577-6900 | PLUG |
117/1. | [1] | 146577-7000 | PLUG |
117/1. | [1] | 146577-7100 | PLUG |
117/1. | [1] | 146577-7200 | PLUG |
117/1. | [1] | 146577-7300 | PLUG |
117/1. | [1] | 146577-7400 | PLUG |
117/1. | [1] | 146577-7500 | PLUG |
117/1. | [1] | 146577-7600 | PLUG |
117/1. | [1] | 146577-7700 | PLUG |
117/1. | [1] | 146577-7800 | PLUG |
117/1. | [1] | 146577-7900 | PLUG |
117/1. | [1] | 146577-8000 | PLUG |
117/1. | [1] | 146577-8100 | PLUG |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0020 | CAPSULE D14 |
130/2. | [1] | 026508-1140 | GASKET |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0920 | CONTROL VALVE '09'4XD1.6K=2. |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-0120 | OVER FLOW VALVE |
137. | [2] | 026512-1840 | GASKET |
138. | [1] | 146605-5320 | INLET UNION OUT B1 B2 |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 146201-0100 | WOODRUFF KEY |
220. | [1] | 146587-7600 | COILED SPRING |
223. | [1] | 146670-4920 | MICROSWITCH |
225. | [1] | 146627-7120 | BRACKET |
230. | [1] | 146628-1620 | BRACKET |
231. | [1] | 139106-0500 | FLAT-HEAD SCREW |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
239. | [1] | 023500-5140 | PLAIN WASHER |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-4620 | WIRE ' 46' 12V |
243. | [1] | 013020-5240 | UNION NUT |
244. | [1] | 146613-5620 | PLATE |
245. | [3] | 026512-1840 | GASKET |
246. | [1] | 146125-0020 | EYE BOLT |
247. | [1] | 146606-7020 | INLET UNION IN B3 |
248. | [1] | 146614-0200 | SPACER BUSHING |
275. | [1] | 146619-6220 | BRACKET |
276. | [2] | 010010-2040 | BLEEDER SCREW |
277. | [2] | 014111-0440 | LOCKING WASHER |
280. | [1] | 146360-6120 | START ADVANCE ASSY |
281. | [1] | 146600-0800 | O-RING |
282. | [1] | 020306-1240 | BLEEDER SCREW |
287. | [1] | 020106-3540 | BLEEDER SCREW |
455. | [1] | 146549-4720 | RACK |
460. | [2] | 016010-0440 | LOCKING WASHER |
461. | [1] | 014010-4140 | PLAIN WASHER |
800S. | [1] | 146009-7420 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
804S. | [1] | 146232-0220 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
903. | [1] | 146672-2020 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING |
906. | [1] | 146639-8500 | NUMBER PLATE 49-6391 |
Include in #2:
104749-6391
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Fuel Filter
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
Fuel Injection Pipe, Fuel Leak-Off Pipe and Fuel Injection Nozzle
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
Fuel Injection Pump
(In-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump.
(Distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the injection pump.
Removal of Fuel Injection Pump
(1) Check the alignment marks stamped on the flange of the fuel injection pump and the pump mounting flange.(2) Remove the front cover from the engine.(3) Place alignment marks on the fuel injection pump gear and idler gear.(4) Unscrew the mounting bolts from the fuel injection pump flange, and remove the fuel injection pump together with the flange from the front plate. (a) After the fuel injection pump is removed, do not turn the engine.(b) When removing the pump gear, loosen the gear retaining nut while the pump is mounted on the engine.
Removal of fuel injection pump (1)
Removal of fuel injection pump (2)
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump and fuel hoses.
Fuel Injection Pipe, Fuel Leak-Off Pipe and Fuel Injection Nozzle
(For in-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
(For distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump, nozzle inlet connectors and injection pipes.
Fuel Injection Pump
(In-line fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the fuel injection pump.
(Distributor-type fuel injection pump)
To prevent dust from entering the fuel system, cover all openings in the injection pump.
Removal of Fuel Injection Pump
(1) Check the alignment marks stamped on the flange of the fuel injection pump and the pump mounting flange.(2) Remove the front cover from the engine.(3) Place alignment marks on the fuel injection pump gear and idler gear.(4) Unscrew the mounting bolts from the fuel injection pump flange, and remove the fuel injection pump together with the flange from the front plate. (a) After the fuel injection pump is removed, do not turn the engine.(b) When removing the pump gear, loosen the gear retaining nut while the pump is mounted on the engine.
Removal of fuel injection pump (1)
Removal of fuel injection pump (2)