Information injection-pump assembly
ZEXEL
104749-1950
1047491950
ISUZU
8941404500
8941404500
Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104749-1950 |
1. | _ | |
2. | FUEL INJECTION PUMP | |
3. | NUMBER PLATE | 146638-2100 |
4. | _ | |
5. | CAPSULE | 146620-0120 |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105141-2061 |
8. | Nozzle and Holder | 8-94220-084-2 |
9. | Open Pre:MPa(Kqf/cm2) | 11.8{120} |
10. | NOZZLE-HOLDER | 105071-1380 |
11. | NOZZLE | 105000-1770 |
Scheme ###:
1. | [1] | 146003-0620 | PUMP HOUSING 2K D20 L R |
1/6. | [1] | 146601-0100 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP D20 |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0320 | DRIVE SHAFT D20 L |
12/1. | [1] | 146200-0300 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0001 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-0120 | ROLLER SET MMC C=1.2 |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0020 | CAM PLATE '00'SK3277 |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-0700 | PUMP PLUNGER ' 7' 5-11 |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-0100 | COMPRESSION SPRING K=2.25 |
35. | [1] | 029998-0710 | SHIM |
35/1. | [1] | 146603-0700 | SHIM |
35/1. | [1] | 146603-0800 | SHIM |
35/1. | [1] | 146603-0900 | SHIM |
35/1. | [1] | 146603-1000 | SHIM |
35/1. | [1] | 146603-1100 | SHIM |
35/1. | [1] | 146603-3600 | SHIM |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0000 | COVER |
38. | [2] | 139106-0000 | FLAT-HEAD SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 139106-0000 | FLAT-HEAD SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0000 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48. | [2] | 029998-0570 | SHIM |
48/1. | [1] | 146603-0000 | SHIM |
48/1. | [1] | 146603-0100 | SHIM |
48/1. | [1] | 146603-0200 | SHIM |
48/1. | [1] | 146603-0300 | SHIM |
48/1. | [1] | 146603-0400 | SHIM |
48/1. | [1] | 146603-0500 | SHIM |
48/1. | [1] | 146603-0600 | SHIM |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146400-2520 | HYDRAULIC HEAD |
50. | [1] | 146400-2520 | HYDRAULIC HEAD |
50. | [1] | 146400-2520 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52. | [1] | 029998-0300 | SHIM |
52/1. | [1] | 146420-0000 | SHIM |
52/1. | [1] | 146420-0100 | SHIM |
52/1. | [1] | 146420-0200 | SHIM |
52/1. | [1] | 146420-0300 | SHIM |
52/1. | [1] | 146420-0400 | SHIM |
52/1. | [1] | 146420-0500 | SHIM |
52/1. | [1] | 146420-0600 | SHIM |
52/1. | [1] | 146420-0700 | SHIM |
52/1. | [1] | 146420-0800 | SHIM |
52/1. | [1] | 146420-0900 | SHIM |
52/1. | [1] | 146420-1000 | SHIM |
52/1. | [1] | 146420-1100 | SHIM |
52/1. | [1] | 146420-1200 | SHIM |
52/1. | [1] | 146420-1300 | SHIM |
52/1. | [1] | 146420-1400 | SHIM |
52/1. | [1] | 146420-1500 | SHIM |
52/1. | [1] | 146420-1600 | SHIM |
52/1. | [1] | 146420-1700 | SHIM |
52/1. | [1] | 146420-1800 | SHIM |
52/1. | [1] | 146420-1900 | SHIM |
52/1. | [1] | 146420-2000 | SHIM |
52/1. | [1] | 146420-2100 | SHIM |
52/1. | [1] | 146420-2200 | SHIM |
52/1. | [1] | 146420-2300 | SHIM |
52/1. | [1] | 146420-2400 | SHIM |
52/1. | [1] | 146420-2500 | SHIM |
52/1. | [1] | 146420-2600 | SHIM |
52/1. | [1] | 146420-2700 | SHIM |
52/1. | [1] | 146420-2800 | SHIM |
52/1. | [1] | 146420-2900 | SHIM |
52/1. | [1] | 146420-3000 | SHIM |
52/1. | [1] | 146420-3100 | SHIM |
52/1. | [1] | 146420-3200 | SHIM |
52/1. | [1] | 146420-3300 | SHIM |
52/1. | [1] | 146420-3400 | SHIM |
52/1. | [1] | 146420-3500 | SHIM |
52/1. | [1] | 146420-3600 | SHIM |
52/1. | [1] | 146420-3700 | SHIM |
52/1. | [1] | 146420-3800 | SHIM |
52/1. | [1] | 146420-3900 | SHIM |
52/1. | [1] | 146420-4000 | SHIM |
52/1. | [1] | 146420-4100 | SHIM |
52/1. | [1] | 146420-4200 | SHIM |
52/1. | [1] | 146420-4300 | SHIM |
52/1. | [1] | 146420-4400 | SHIM |
52/1. | [1] | 146420-4500 | SHIM |
52/1. | [1] | 146420-4600 | SHIM |
52/1. | [1] | 146420-4700 | SHIM |
52/1. | [1] | 146420-4800 | SHIM |
52/1. | [1] | 146420-4900 | SHIM |
52/1. | [1] | 146420-5000 | SHIM |
52/1. | [1] | 146420-5100 | SHIM |
52/1. | [1] | 146420-5200 | SHIM |
52/1. | [1] | 146420-5300 | SHIM |
52/1. | [1] | 146420-5400 | SHIM |
52/1. | [1] | 146420-5500 | SHIM |
52/1. | [1] | 146420-5600 | SHIM |
52/1. | [1] | 146420-5700 | SHIM |
52/1. | [1] | 146420-5800 | SHIM |
54. | [4] | 146433-0100 | GASKET |
55. | [4] | 146430-0120 | DELIVERY-VALVE ASSEMBLY 'VE2' VR25 |
56. | [4] | 146432-0000 | COMPRESSION SPRING K=0.48 |
58. | [4] | 146440-0120 | FITTING D0.45 L=55 |
60. | [4] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146502-0220 | GOVERNOR COVER |
67/13. | [1] | 013020-6040 | UNION NUT |
67/14. | [1] | 029240-6010 | UNION NUT |
67/15. | [1] | 146526-1800 | BLEEDER SCREW |
67/16. | [1] | 146526-0200 | BLEEDER SCREW |
67/23. | [1] | 146613-1300 | BRACKET |
67/24. | [2] | 139106-0000 | FLAT-HEAD SCREW |
68. | [1] | 146510-1220 | CONTROL SHAFT R=10 S R |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146530-6520 | CONTROL LEVER |
72B. | [1] | 146530-6620 | CONTROL LEVER ' 0' |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT |
87. | [1] | 139308-0300 | PLAIN WASHER |
88. | [1] | 146545-0300 | THREADED PIN |
88B. | [1] | 146545-0400 | THREADED PIN |
88C. | [1] | 146545-0500 | THREADED PIN |
90. | [1] | 139208-0100 | UNION NUT |
91. | [1] | 146600-1200 | O-RING |
92. | [1] | 146600-1000 | SEAL RING |
95. | [1] | 146551-0220 | FULCRUM LEVER I=2.2 |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET |
106. | [2] | 146588-0000 | COILED SPRING |
107. | [1] | 146569-0100 | UNION NUT |
108. | [1] | 146570-0000 | GOVERNOR SHAFT L |
109. | [1] | 146600-0400 | O-RING |
110. | [1] | 029998-4130 | SHIM |
110/1. | [1] | 146571-0000 | SHIM |
110/1. | [1] | 146571-0100 | SHIM |
110/1. | [1] | 146571-0200 | SHIM |
110/1. | [1] | 146571-0300 | SHIM |
110/1. | [1] | 146571-0400 | SHIM |
110/1. | [1] | 146571-0500 | SHIM |
110/1. | [1] | 146571-0600 | SHIM |
110/1. | [1] | 146571-0700 | SHIM |
110/1. | [1] | 146571-0800 | SHIM |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER |
115. | [1] | 146575-0000 | SLIDING SLEEVE D2.0 |
116. | [1] | 146576-0000 | SEALING CAP |
117. | [1] | 029998-5460 | PLUG |
117/1. | [1] | 146577-0000 | PLUG |
117/1. | [1] | 146577-0100 | PLUG |
117/1. | [1] | 146577-0200 | PLUG |
117/1. | [1] | 146577-0300 | PLUG |
117/1. | [1] | 146577-0400 | PLUG |
117/1. | [1] | 146577-0500 | PLUG |
117/1. | [1] | 146577-0600 | PLUG |
117/1. | [1] | 146577-0700 | PLUG |
117/1. | [1] | 146577-0800 | PLUG |
117/1. | [1] | 146577-0900 | PLUG |
117/1. | [1] | 146577-1000 | PLUG |
117/1. | [1] | 146577-1100 | PLUG |
117/1. | [1] | 146577-1200 | PLUG |
117/1. | [1] | 146577-1300 | PLUG |
117/1. | [1] | 146577-1400 | PLUG |
117/1. | [1] | 146577-1500 | PLUG |
117/1. | [1] | 146577-1600 | PLUG |
117/1. | [1] | 146577-1700 | PLUG |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0020 | CAPSULE D14 |
130/2. | [1] | 026508-1140 | GASKET |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE '02'4XD1.6K=1. |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-0120 | OVER FLOW VALVE |
137. | [2] | 026512-1840 | GASKET |
138. | [1] | 146610-5920 | INLET UNION OUT B1 B1 |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 029470-4030 | WOODRUFF KEY |
217. | [1] | 146541-0100 | SLOTTED WASHER |
218. | [1] | 146587-1200 | COILED SPRING |
219. | [1] | 146541-0200 | ANGLE PIECE |
220. | [1] | 146587-0900 | COILED SPRING |
239. | [1] | 023500-5140 | PLAIN WASHER |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-0210 | WIRE |
243. | [1] | 013020-5240 | UNION NUT |
245. | [3] | 026512-1840 | GASKET |
245. | [3] | 026512-1840 | GASKET |
246. | [1] | 146125-0020 | EYE BOLT |
247. | [1] | 146610-5220 | INLET UNION IN B3 |
248. | [1] | 146614-0200 | SPACER BUSHING |
275. | [1] | 146612-0120 | BRACKET |
276. | [2] | 010010-2040 | BLEEDER SCREW |
277. | [2] | 014111-0440 | LOCKING WASHER |
800S. | [1] | 146009-1020 | PUMP HOUSING |
800S/1. | [1] | 146003-0620 | PUMP HOUSING 2K D20 L R |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
804S. | [1] | 146232-0220 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
903. | [1] | 146620-0120 | CAPSULE |
903/2. | [1] | 146600-1300 | O-RING |
906. | [1] | 146638-2100 | NUMBER PLATE |
Include in #2:
104749-1950
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Cat Data Logging and Alarm System (DLAS) 300
The Cat DPF system requires a Cat Data Logging and Alarm System (DLAS). The Cat DLAS measures and records exhaust temperature and backpressure. These parameters are essential in determining whether the application duty cycle is acceptable for the filter. There are also a series of alarms to help the user in case a problem occurs.Establishing an Ethernet Connection
Connect a laptop or other computer to the DLAS300 using an ethernet cable. The ethernet cable is also referred to as a LAN or network cable.
Verify that the green link light on the ethernet connector is on.
Wait for Windows to configure the network.
Start Internet Explorer, Firefox, Chrome or another web browser on the laptop.
Enter dlas300 or 169.254.1.1 into the address bar of the web browser. The web page should begin to display within a few seconds.
If the page cannot be found, or if a different web page is displayed, refer to network troubleshooting.To communicate with the DLAS300, the ethernet adapter on the laptop must be configured with an IP address on the 169.254.0.0/16 network. If the laptop is configured to use DHCP but cannot find a DHCP server, Windows will use Automatic Private IP Addressing (APIPA) to choose an IP address on the 169.254.0.0/16 network.An alternate solution is to configure the Internet Protocol (TCP/IP) Properties with a static IP address. To configure a static IP address, follow the steps below:
Open "Network Connections" from the control panel and change the settings of the ethernet connection. Ethernet connection is often called Local Area Connection.
From the "Properties" dialog box, select "Internet Protocol" (TCP/IP) and click "Properties".
The 169.254.2.1 address is a suggestion.
Any IP address other than 169.254.1.1 or the DLAS300 address can be used.web Browser Proxy Settings
The web browser may be configured with proxy settings that prevent accessing the DLAS300. To disable the proxy settings for Internet Explorer or other browsers, follow the steps below:
Open the "Internet Options" dialog box.
Open the dialog box from either the tools menu of Internet Explorer or from the control panel.
Select the "Connections" tab and click the "LAN settings" button.
On the "Local Area Network (LAN) Settings" dialog box, de-select everything.Downloading Data
The logged data can be copied to a USB flash drive or downloaded through the web interface. The resulting data file is in comma-separated value (CSV) format for easy import into Microsoft Excel or other data analysis software. The first two lines of the file contain the engine name, engine serial number, catalyst serial number, and initial performance test results.To copy the logged data to a USB flash drive, perform the following steps:
Insert the USB flash drive into the USB port on the front panel.
Press and release the front panel button.
Monitor the activity light on the USB flash drive. The transfer is complete when no activity is indicated for more than 5 seconds. If the USB flash drive does not have an activity light, wait at least 5 minutes to ensure that all data has been copied.
Remove the USB flash driveCopying may take
The Cat DPF system requires a Cat Data Logging and Alarm System (DLAS). The Cat DLAS measures and records exhaust temperature and backpressure. These parameters are essential in determining whether the application duty cycle is acceptable for the filter. There are also a series of alarms to help the user in case a problem occurs.Establishing an Ethernet Connection
Connect a laptop or other computer to the DLAS300 using an ethernet cable. The ethernet cable is also referred to as a LAN or network cable.
Verify that the green link light on the ethernet connector is on.
Wait for Windows to configure the network.
Start Internet Explorer, Firefox, Chrome or another web browser on the laptop.
Enter dlas300 or 169.254.1.1 into the address bar of the web browser. The web page should begin to display within a few seconds.
If the page cannot be found, or if a different web page is displayed, refer to network troubleshooting.To communicate with the DLAS300, the ethernet adapter on the laptop must be configured with an IP address on the 169.254.0.0/16 network. If the laptop is configured to use DHCP but cannot find a DHCP server, Windows will use Automatic Private IP Addressing (APIPA) to choose an IP address on the 169.254.0.0/16 network.An alternate solution is to configure the Internet Protocol (TCP/IP) Properties with a static IP address. To configure a static IP address, follow the steps below:
Open "Network Connections" from the control panel and change the settings of the ethernet connection. Ethernet connection is often called Local Area Connection.
From the "Properties" dialog box, select "Internet Protocol" (TCP/IP) and click "Properties".
The 169.254.2.1 address is a suggestion.
Any IP address other than 169.254.1.1 or the DLAS300 address can be used.web Browser Proxy Settings
The web browser may be configured with proxy settings that prevent accessing the DLAS300. To disable the proxy settings for Internet Explorer or other browsers, follow the steps below:
Open the "Internet Options" dialog box.
Open the dialog box from either the tools menu of Internet Explorer or from the control panel.
Select the "Connections" tab and click the "LAN settings" button.
On the "Local Area Network (LAN) Settings" dialog box, de-select everything.Downloading Data
The logged data can be copied to a USB flash drive or downloaded through the web interface. The resulting data file is in comma-separated value (CSV) format for easy import into Microsoft Excel or other data analysis software. The first two lines of the file contain the engine name, engine serial number, catalyst serial number, and initial performance test results.To copy the logged data to a USB flash drive, perform the following steps:
Insert the USB flash drive into the USB port on the front panel.
Press and release the front panel button.
Monitor the activity light on the USB flash drive. The transfer is complete when no activity is indicated for more than 5 seconds. If the USB flash drive does not have an activity light, wait at least 5 minutes to ensure that all data has been copied.
Remove the USB flash driveCopying may take