Information injection-pump assembly
BOSCH
9 460 613 711
9460613711
ZEXEL
104749-1900
1047491900
ISUZU
8941390750
8941390750

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104749-1900 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104649-1520 |
3. | NUMBER PLATE | 146638-1300 |
4. | _ | 146672-1020 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | 146620-2220 |
7. | NOZZLE AND HOLDER ASSY | 105141-2401 |
8. | Nozzle and Holder | 8-94126-452-0 |
9. | Open Pre:MPa(Kqf/cm2) | 11.8{120} |
10. | NOZZLE-HOLDER | 105071-1380 |
11. | NOZZLE | 105000-1890 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0520 | DRIVE SHAFT |
12/1. | [1] | 146200-0500 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-0120 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0020 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-0700 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM D17.5&7.5T0.60 |
34. | [1] | 146302-3400 | COMPRESSION SPRING |
35/1. | [0] | 146603-0700 | SHIM D17.5&7.5T0.60 |
35/1. | [0] | 146603-0800 | SHIM D17.5&7.5T0.70 |
35/1. | [0] | 146603-0900 | SHIM D17.5&7.5T0.90 |
35/1. | [0] | 146603-1000 | SHIM D17.5&7.5T1.00 |
35/1. | [0] | 146603-1100 | SHIM D17.5&7.5T1.20 |
35/1. | [0] | 146603-3600 | SHIM D17.5&7.5T2.40 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0000 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM D17&5.2T2.1 |
48/1. | [1] | 146690-5900 | SHIM D17&5.2T2.2 |
48/1. | [1] | 146690-6000 | SHIM D17&5.2T2.3 |
48/1. | [1] | 146690-6100 | SHIM D17&5.2T2.4 |
48/1. | [1] | 146690-6200 | SHIM D17&5.2T2.5 |
48/1. | [1] | 146690-6300 | SHIM D17&5.2T2.6 |
48/1. | [1] | 146690-6400 | SHIM D17&5.2T2.7 |
48/1. | [1] | 146690-6500 | SHIM D17&5.2T2.8 |
48/1. | [1] | 146690-6600 | SHIM D17&5.2T2.9 |
48/1. | [1] | 146690-6700 | SHIM D17&5.2T3.0 |
48/1. | [1] | 146690-6800 | SHIM D17&5.2T3.1 |
48/1. | [1] | 146690-6900 | SHIM D17&5.2T3.2 |
48/1. | [1] | 146690-7000 | SHIM D17&5.2T3.3 |
48/1. | [1] | 146690-7100 | SHIM D17&5.2T3.4 |
48/1. | [1] | 146690-7200 | SHIM D17&5.2T0.4 |
48/1. | [1] | 146690-7300 | SHIM D17&5.2T0.6 |
48/1. | [1] | 146690-7400 | SHIM D17&5.2T0.7 |
48/1. | [1] | 146690-7500 | SHIM D17&5.2T1.9 |
48/1. | [1] | 146690-7800 | SHIM D17&5.2T0.2 |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146400-7420 | HYDRAULIC HEAD |
50. | [1] | 146400-7420 | HYDRAULIC HEAD |
50. | [1] | 146400-7420 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [4] | 146430-0120 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0000 | COMPRESSION SPRING |
58. | [4] | 146440-0120 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146502-6020 | GOVERNOR COVER |
67/1. | [1] | 146505-9220 | GOVERNOR COVER |
67/13. | [1] | 013020-6040 | UNION NUT M6P1H5 |
67/14. | [1] | 029240-6010 | UNION NUT M6P1.0H5* |
67/15. | [1] | 146526-1800 | BLEEDER SCREW |
67/16. | [1] | 146526-0200 | BLEEDER SCREW |
67/23. | [1] | 146625-7500 | BRACKET |
67/24. | [2] | 020106-2540 | BLEEDER SCREW M6P1L25 |
67/26. | [1] | 146625-9420 | BRACKET |
67/78. | [1] | 146600-4400 | SEAL RING |
67/78. | [1] | 146600-4400 | SEAL RING |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-0300 | THREADED PIN L53.00 |
67/201B. | [1] | 146545-0400 | THREADED PIN L55.00 |
67/201C. | [1] | 146545-0500 | THREADED PIN L57.00 |
67/202. | [1] | 139208-0100 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146510-4020 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146533-6120 | CONTROL LEVER |
72B. | [1] | 146533-6220 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT M6P1H5 |
95. | [1] | 146551-0220 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146575-0000 | SLIDING SLEEVE |
116. | [1] | 146576-0000 | SEALING CAP |
117/1. | [1] | 146577-0000 | PLUG L1.70 |
117/1. | [1] | 146577-0100 | PLUG L1.90 |
117/1. | [1] | 146577-0200 | PLUG L2.10 |
117/1. | [1] | 146577-0300 | PLUG L2.30 |
117/1. | [1] | 146577-0400 | PLUG L2.50 |
117/1. | [1] | 146577-0500 | PLUG L2.70 |
117/1. | [1] | 146577-0600 | PLUG L2.90 |
117/1. | [1] | 146577-0700 | PLUG L3.10 |
117/1. | [1] | 146577-0800 | PLUG L3.30 |
117/1. | [1] | 146577-0900 | PLUG L3.50 |
117/1. | [1] | 146577-1000 | PLUG L3.70 |
117/1. | [1] | 146577-1100 | PLUG L3.90 |
117/1. | [1] | 146577-1200 | PLUG L4.10 |
117/1. | [1] | 146577-1300 | PLUG L4.30 |
117/1. | [1] | 146577-1400 | PLUG L4.50 |
117/1. | [1] | 146577-1500 | PLUG L4.70 |
117/1. | [1] | 146577-1600 | PLUG L4.90 |
117/1. | [1] | 146577-1700 | PLUG L5.10 |
117/1. | [1] | 146577-5000 | PLUG L1.8 |
117/1. | [1] | 146577-5100 | PLUG L2.0 |
117/1. | [1] | 146577-5200 | PLUG L2.2 |
117/1. | [1] | 146577-5300 | PLUG L2.4 |
117/1. | [1] | 146577-5400 | PLUG L2.6 |
117/1. | [1] | 146577-5500 | PLUG L2.8 |
117/1. | [1] | 146577-5600 | PLUG L3.0 |
117/1. | [1] | 146577-5700 | PLUG L3.2 |
117/1. | [1] | 146577-5800 | PLUG L3.4 |
117/1. | [1] | 146577-5900 | PLUG L3.6 |
117/1. | [1] | 146577-6000 | PLUG L3.8 |
117/1. | [1] | 146577-6100 | PLUG L4.0 |
117/1. | [1] | 146577-6200 | PLUG L4.2 |
117/1. | [1] | 146577-6300 | PLUG L4.4 |
117/1. | [1] | 146577-6400 | PLUG L4.6 |
117/1. | [1] | 146577-6500 | PLUG L4.8 |
117/1. | [1] | 146577-6600 | PLUG L5.0 |
117/1. | [1] | 146877-0400 | PLUG |
117/1. | [1] | 146877-0500 | PLUG |
117/1. | [1] | 146877-0600 | PLUG |
117/1. | [1] | 146877-0700 | PLUG |
117/1. | [1] | 146877-4300 | PLUG |
117/1. | [1] | 146877-4400 | PLUG |
117/1. | [1] | 146877-4500 | PLUG |
117/1. | [1] | 146877-4600 | PLUG |
123. | [3] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-0120 | OVER FLOW VALVE |
137. | [2] | 026512-1840 | GASKET D17.9&12.2T1.50 |
137. | [2] | 026512-1840 | GASKET D17.9&12.2T1.50 |
138. | [1] | 146609-6720 | INLET UNION |
200. | [1] | 146206-0100 | COILED SPRING |
204. | [1] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
205. | [1] | 146201-0100 | WOODRUFF KEY |
220. | [1] | 146587-1100 | COILED SPRING |
223. | [1] | 146670-3520 | MICROSWITCH |
224. | [1] | 146625-7620 | BRACKET |
224/2. | [1] | 020106-1040 | BLEEDER SCREW M6P1L12 |
225. | [1] | 146625-4120 | BRACKET |
225/2. | [2] | 139106-0300 | FLAT-HEAD SCREW M6P1.0H10 |
230. | [1] | 146619-7500 | BRACKET |
231. | [2] | 139106-0500 | FLAT-HEAD SCREW M6P1.0H25 |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-7320 | WIRE |
243. | [1] | 146621-1000 | UNION NUT |
245. | [3] | 026512-1840 | GASKET D17.9&12.2T1.50 |
245. | [3] | 026512-1840 | GASKET D17.9&12.2T1.50 |
246. | [1] | 146125-0020 | EYE BOLT |
247. | [1] | 146609-5720 | INLET UNION |
248. | [1] | 146614-0200 | SPACER BUSHING |
275. | [1] | 146619-6220 | BRACKET |
276. | [2] | 010010-2040 | BLEEDER SCREW M10P1.5L20 |
277. | [2] | 014111-0440 | LOCKING WASHER |
800S. | [1] | 146009-1020 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0220 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
903. | [1] | 146672-1020 | PULSE GENERATOR |
903. | [1] | 146672-1020 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING &13W1.9 |
905. | [1] | 146620-2220 | ACTUATOR |
905. | [1] | 146620-2220 | ACTUATOR |
905. | [1] | 146620-2220 | ACTUATOR |
905. | [1] | 146620-2220 | ACTUATOR |
905. | [1] | 146620-2220 | ACTUATOR |
906. | [1] | 146638-1300 | NAMEPLATE |
Include in #2:
104749-1900
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
104749-1900
9 460 613 711
8941390750 ISUZU
INJECTION-PUMP ASSEMBLY
4FC1J * K
4FC1J * K
Information:
System Labeling
The applicant must ensure that identical, legible, and durable labels are affixed on both the diesel emission control strategy and the engine (or an alternate location approved by the Executive Officer) on which the verified diesel emission control strategy is installed except as noted in (3) below. All labels must be constructed and affixed so that the labels resist tampering. All labels must be constructed and affixed so that the labels remain legible for the duration of the diesel emission control strategy minimum warranty period. One label shall be welded, riveted, or otherwise permanently attached to the diesel emission control strategy and the other affixed to the engine in such a manner that the label cannot be easily removed (for example, bolted). The required labels must identify the name, address, and phone number of the manufacturer, the diesel emission control strategy family name (defined in (2) below) of the installed system, a unique serial number, and the month and year of manufacture. The month and year of manufacture are not required on the label if this information can be readily obtained from the applicant by referencing the serial number. The applicant and/or installer must ensure that the label is visible after installation. If the original strategy label is damaged, destroyed, or missing, the device manufacture shall issue an ARB approved replacement. The replacement label must be identical to the original label except for the words "REPLACEMENT LABEL" which must be included at the bottom line of information. A sample scale drawing of the original and replacement labels must be submitted with the verification application. The end user must notify the applicant in the event of a damaged, destroyed, or missing original strategy label. The applicant must issue a replacement label within 45 days of notification by an end user of a damaged, destroyed, or missing label. All labels must be approved by the Executive Officer and must only be used with an ARB verified diesel emission control strategy. Unless an alternative is approved by the Executive Officer, the label information must be in the following format:
1. Name, Address, and Phone Number of Manufacturer
2. Diesel Emission Control Strategy Family Name
3. Product Serial Number
4. (optional) ZZ-ZZ (Month and Year of manufacture, for example, 06-02)
5. Replacement label (Replacement Label to be used only when a replacement of the original label has been issued by the device manufacturer).Diesel Emission Control Strategy Family Name. Each diesel emission control strategy shall be assigned a family name defined as below:Diesel Emission Control Strategy Family Name
Each diesel emission control strategy shall be assigned a family name "CA/MMM/YYY/PM#N##/AP/XXXXX" defined below:CA - Designates a diesel emission control strategy verified in California.YYYY - Manufacturer code (assigned by the executive Officer).PM# - PM verification level 0, 1, 1+, 2, 2+, 3, or 3+ (for example, PM3 means a level 3 PM emission control system).N## - NOx verified reduction level in percent, if any (for example, N25 means NOx reduction of 25 percent).AP - Verified application that includes one of
The applicant must ensure that identical, legible, and durable labels are affixed on both the diesel emission control strategy and the engine (or an alternate location approved by the Executive Officer) on which the verified diesel emission control strategy is installed except as noted in (3) below. All labels must be constructed and affixed so that the labels resist tampering. All labels must be constructed and affixed so that the labels remain legible for the duration of the diesel emission control strategy minimum warranty period. One label shall be welded, riveted, or otherwise permanently attached to the diesel emission control strategy and the other affixed to the engine in such a manner that the label cannot be easily removed (for example, bolted). The required labels must identify the name, address, and phone number of the manufacturer, the diesel emission control strategy family name (defined in (2) below) of the installed system, a unique serial number, and the month and year of manufacture. The month and year of manufacture are not required on the label if this information can be readily obtained from the applicant by referencing the serial number. The applicant and/or installer must ensure that the label is visible after installation. If the original strategy label is damaged, destroyed, or missing, the device manufacture shall issue an ARB approved replacement. The replacement label must be identical to the original label except for the words "REPLACEMENT LABEL" which must be included at the bottom line of information. A sample scale drawing of the original and replacement labels must be submitted with the verification application. The end user must notify the applicant in the event of a damaged, destroyed, or missing original strategy label. The applicant must issue a replacement label within 45 days of notification by an end user of a damaged, destroyed, or missing label. All labels must be approved by the Executive Officer and must only be used with an ARB verified diesel emission control strategy. Unless an alternative is approved by the Executive Officer, the label information must be in the following format:
1. Name, Address, and Phone Number of Manufacturer
2. Diesel Emission Control Strategy Family Name
3. Product Serial Number
4. (optional) ZZ-ZZ (Month and Year of manufacture, for example, 06-02)
5. Replacement label (Replacement Label to be used only when a replacement of the original label has been issued by the device manufacturer).Diesel Emission Control Strategy Family Name. Each diesel emission control strategy shall be assigned a family name defined as below:Diesel Emission Control Strategy Family Name
Each diesel emission control strategy shall be assigned a family name "CA/MMM/YYY/PM#N##/AP/XXXXX" defined below:CA - Designates a diesel emission control strategy verified in California.YYYY - Manufacturer code (assigned by the executive Officer).PM# - PM verification level 0, 1, 1+, 2, 2+, 3, or 3+ (for example, PM3 means a level 3 PM emission control system).N## - NOx verified reduction level in percent, if any (for example, N25 means NOx reduction of 25 percent).AP - Verified application that includes one of
Have questions with 104749-1900?
Group cross 104749-1900 ZEXEL
Isuzu
104749-1900
9 460 613 711
8941390750
INJECTION-PUMP ASSEMBLY
4FC1J
4FC1J