104749-1690 ZEXEL 9 460 614 697 BOSCH INJECTION-PUMP ASSEMBLY 9460614697 1047491690 8941237250


 

Information injection-pump assembly

BOSCH 9 460 614 697 9460614697
ZEXEL 104749-1690 1047491690
ISUZU 8941237250 8941237250
104749-1690 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 104749-1690 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104749-1690
1. _
2. FUEL INJECTION PUMP 104649-1450
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE 593175-2221
7. NOZZLE AND HOLDER ASSY 105151-1550
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 10.3(105)
10. NOZZLE-HOLDER 105081-3210
11. NOZZLE 105000-1740

Scheme ###:

1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0120 SUPPLY PUMP
9. [1] 146103-0000 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0320 DRIVE SHAFT
12/1. [1] 146200-0300 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-1720 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-0020 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-0900 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
33. [1] 146603-0700 SHIM
34. [1] 146302-3500 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0000 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146340-0921 START ADVANCE ASSY
39/1. [1] 146342-2200 DIAPHRAGM HOUSING
39/2. [1] 146342-2320 PUMP PLUNGER
39/3. [1] 146342-2421 COVER
39/4. [1] 146342-3700 COILED SPRING
39/5. [1] 146342-3800 COILED SPRING
39/6. [1] 146602-1600 PLAIN WASHER
39/7/1. [0] 146603-4300 SHIM T0.30
39/7/1. [0] 146603-4400 SHIM T0.50
39/7/1. [0] 146603-4500 SHIM T0.70
39/7/1. [0] 146603-4600 SHIM T1.00
39/7/1. [0] 146603-4700 SHIM T1.20
39/9. [1] 146342-2800 CAPSULE
39/10. [1] 016500-2220 O-RING
39/11. [4] 020106-1640 BLEEDER SCREW
39/14. [1] 131420-0400 BLEEDER SCREW
39/15. [1] 026506-1040 GASKET
40. [2] 013020-6040 UNION NUT
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0500 GUIDE PIN
50. [1] 146400-5420 HYDRAULIC HEAD
50. [1] 146400-5420 HYDRAULIC HEAD
50. [1] 146400-5420 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET
55. [4] 146430-0120 DELIVERY-VALVE ASSEMBLY VE2
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0120 FITTING
60. [4] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146705-3622 ANEROID CAPSULE
67/1. [1] 146505-9021 GOVERNOR COVER
67/13. [1] 013020-6040 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-1800 BLEEDER SCREW
67/16. [1] 146526-3000 BLEEDER SCREW
67/23. [1] 146625-8300 BRACKET
67/24. [2] 010506-1640 FLAT-HEAD SCREW
67/26. [1] 146625-3020 BRACKET
67/31. [1] 146710-0400 BUSHING
67/32. [1] 146602-1800 PLAIN WASHER
67/33. [1] 146716-0200 UNION NUT
67/34/1. [1] 146713-1000 BEARING PIN L24.6
67/34/1. [1] 146713-1100 BEARING PIN L24.8
67/34/1. [1] 146713-1200 BEARING PIN L25.0
67/34/1. [1] 146713-1300 BEARING PIN L25.2
67/34/1. [1] 146713-1400 BEARING PIN L25.4
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-0100 BUSHING
67/38. [1] 139506-0200 GASKET
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET
67/41. [1] 146713-3500 ADJUSTING PIN
67/47. [1] 146717-0200 COILED SPRING
67/49. [1] 146721-0700 COVER
67/54. [4] 139006-4500 BLEEDER SCREW
67/56. [1] 146723-0200 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0400 CAPSULE
67/64. [1] 146625-3300 BRACKET
67/70. [1] 016520-6010 O-RING
67/71. [1] 146714-0100 SLOTTED WASHER
67/72. [1] 016010-0920 LOCKING WASHER
67/73. [1] 146715-0120 BELLOWS
67/74/1. [0] 146603-3700 SHIM T0.20
67/74/1. [0] 146603-3800 SHIM T0.30
67/74/1. [0] 146603-3900 SHIM T0.50
67/74/1. [0] 146603-4000 SHIM T0.70
67/74/1. [0] 146603-4100 SHIM T1.00
67/74/1. [0] 146603-4200 SHIM T1.50
67/78. [1] 146600-4400 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146510-2020 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146533-1720 CONTROL LEVER
72B. [1] 146533-1820 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
75. [1] 013020-6040 UNION NUT
95. [1] 146561-0920 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146575-0500 SLIDING SLEEVE
116. [1] 146576-0000 SEALING CAP
117/1. [1] 146577-0000 PLUG L1.70
117/1. [1] 146577-0100 PLUG L1.90
117/1. [1] 146577-0200 PLUG L2.10
117/1. [1] 146577-0300 PLUG L2.30
117/1. [1] 146577-0400 PLUG L2.50
117/1. [1] 146577-0500 PLUG L2.70
117/1. [1] 146577-0600 PLUG L2.90
117/1. [1] 146577-0700 PLUG L3.10
117/1. [1] 146577-0800 PLUG L3.30
117/1. [1] 146577-0900 PLUG L3.50
117/1. [1] 146577-1000 PLUG L3.70
117/1. [1] 146577-1100 PLUG L3.90
117/1. [1] 146577-1200 PLUG L4.10
117/1. [1] 146577-1300 PLUG L4.30
117/1. [1] 146577-1400 PLUG L4.50
117/1. [1] 146577-1500 PLUG L4.70
117/1. [1] 146577-1600 PLUG L4.90
117/1. [1] 146577-1700 PLUG L5.10
117/1. [1] 146577-5000 PLUG L1.8
117/1. [1] 146577-5100 PLUG L2.0
117/1. [1] 146577-5200 PLUG L2.2
117/1. [1] 146577-5300 PLUG L2.4
117/1. [1] 146577-5400 PLUG L2.6
117/1. [1] 146577-5500 PLUG L2.8
117/1. [1] 146577-5600 PLUG L3.0
117/1. [1] 146577-5700 PLUG L3.2
117/1. [1] 146577-5800 PLUG L3.4
117/1. [1] 146577-5900 PLUG L3.6
117/1. [1] 146577-6000 PLUG L3.8
117/1. [1] 146577-6100 PLUG L4.0
117/1. [1] 146577-6200 PLUG L4.2
117/1. [1] 146577-6300 PLUG L4.4
117/1. [1] 146577-6400 PLUG L4.6
117/1. [1] 146577-6500 PLUG L4.8
117/1. [1] 146577-6600 PLUG L5.0
117/1. [1] 146877-0400 PLUG
117/1. [1] 146877-0500 PLUG
117/1. [1] 146877-0600 PLUG
117/1. [1] 146877-0700 PLUG
117/1. [1] 146877-4300 PLUG
117/1. [1] 146877-4400 PLUG
117/1. [1] 146877-4500 PLUG
117/1. [1] 146877-4600 PLUG
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE STAMP 02
135/5. [1] 146114-0000 SPRING WASHER
135B. [1] 146110-1020 CONTROL VALVE STAMP 10
135B/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0020 OVER FLOW VALVE
137. [2] 139512-0500 GASKET
138. [1] 146606-1320 PIPE
150. [2] 014020-6140 PLAIN WASHER D11.5&6.5
151. [2] 139010-0300 STUD
153. [1] 139808-0301 EYE BOLT
154. [2] 026508-1140 GASKET D11.4&8.2T1.0
200. [1] 146206-0100 COILED SPRING
205. [1] 025804-1610 WOODRUFF KEY
206. [1] 013121-4140 UNION NUT
207. [1] 029321-4050 LOCKING WASHER
214. [1] 146541-1900 BUSHING
216. [1] 146541-2000 BUSHING
220. [1] 146587-2600 COILED SPRING
240. [1] 146650-1220 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146658-7320 WIRE
243. [1] 146621-1000 UNION NUT
244. [1] 146613-5620 PLATE
245. [3] 139512-0500 GASKET
246. [1] 146125-0020 EYE BOLT
247. [1] 146610-8620 INLET UNION
248. [1] 146614-0200 SPACER BUSHING
260. [1] 146611-0021 BRACKET
261. [2] 146621-4700 UNION NUT
270. [1] 146615-0000 TIMER CORE
800S. [1] 146009-6020 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0220 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
811S. [1] 146600-2120 PARTS SET
812S. [1] 146600-2220 PARTS SET
821S. [1] 146210-5720 ROLLER SET
903. [1] 146620-0120 CAPSULE
903/2. [1] 146600-1300 O-RING
905. [1] 593175-2221 ADJUSTING DEVICE
905/1. [1] 593174-2301 BRACKET
906. [1] 146635-6300 NAMEPLATE
912. [2] 020146-1270 BLEEDER SCREW

Include in #2:

104749-1690 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 614 697 9460614697
ZEXEL 104749-1690 1047491690
ISUZU 8941237250 8941237250


Zexel num
Bosch num
Firm num
Name
104749-1690 
104749-6520 
9 460 614 697 
8941237250  ISUZU
INJECTION-PUMP ASSEMBLY
C223 K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105000-2010
Bosch type code   NP-DN12SD12TT
Nozzle holder   105780-2080
Opening pressure MPa   14.7 14.7 15.19
Opening pressure kgf/cm2   150 150 155
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-840
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   36.1 35.6 36.6
Difference in delivery mm3/st.   3
Basic   *
Injection timing adjustment_02
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   11.1 7.5 14.7
Injection timing adjustment_03
Pump speed r/min   2175 2175 2175
Average injection quantity mm3/st.   35.05 32.5 37.6
Injection timing adjustment_04
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   36.1 35.1 37.1
Injection timing adjustment_05
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   33.55 31 36.1
Injection timing adjustment_06
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   35.2 34.7 35.7
Difference in delivery mm3/st.   3
Basic   *
Remarks
For Japan
 
Injection timing adjustment_07
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   10.8 7.3 14.3
Remarks
For Japan
 
Injection timing adjustment_08
Pump speed r/min   2175 2175 2175
Average injection quantity mm3/st.   34.2 31.7 36.7
Remarks
For Japan
 
Injection timing adjustment_09
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   35.2 34.2 36.2
Remarks
For Japan
 
Injection timing adjustment_10
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   32.7 30.2 35.2
Remarks
For Japan
 
Injection quantity adjustment
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   11.05 8 14.1
Difference in delivery mm3/st.   3.5
Basic   *
Injection quantity adjustment_02
Pump speed r/min   2700 2700 2700
Average injection quantity mm3/st.   4.1
Injection quantity adjustment_03
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   10.8 7.8 13.8
Difference in delivery mm3/st.   3.5
Basic   *
Remarks
For Japan
 
Injection quantity adjustment_04
Pump speed r/min   2700 2700 2700
Average injection quantity mm3/st.   4
Remarks
For Japan
 
Governor adjustment
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.75 5.7 9.8
Difference in delivery mm3/st.   2
Basic   *
Governor adjustment_02
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.75 5.7 9.8
Governor adjustment_03
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   3.1
Governor adjustment_04
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.6 5.6 9.6
Difference in delivery mm3/st.   2
Basic   *
Remarks
For Japan
 
Governor adjustment_05
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.6 5.6 9.6
Remarks
For Japan
 
Governor adjustment_06
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   3
Remarks
For Japan
 
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   64.6 64.6
Basic   *
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   63 63
Basic   *
Remarks
For Japan
 
Speed control lever angle
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   0 0 0
Remarks
Magnet OFF
 
Speed control lever angle_02
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   0 0 0
Remarks
For Japan: Magnet OFF
 
0000000901
Pump speed r/min   1000 1000 1000
Overflow quantity cm3/min   402 276 528
_02
Pump speed r/min   1000 1000 1000
Overflow quantity cm3/min   420 288 552
Remarks
For Japan
 
Stop lever angle
Pump speed r/min   1500 1500 1500
Pressure kPa   539.5 520 559
Pressure kgf/cm2   5.5 5.3 5.7
Basic   *
Stop lever angle_02
Pump speed r/min   1000 1000 1000
Pressure kPa   411.5 382 441
Pressure kgf/cm2   4.2 3.9 4.5
Stop lever angle_03
Pump speed r/min   1500 1500 1500
Pressure kPa   539.5 520 559
Pressure kgf/cm2   5.5 5.3 5.7
Stop lever angle_04
Pump speed r/min   2175 2175 2175
Pressure kPa   686.5 657 716
Pressure kgf/cm2   7 6.7 7.3
Stop lever angle_05
Pump speed r/min   1500 1500 1500
Pressure kPa   529.5 510 549
Pressure kgf/cm2   5.4 5.2 5.6
Basic   *
Remarks
For Japan
 
Stop lever angle_06
Pump speed r/min   1000 1000 1000
Pressure kPa   402 373 431
Pressure kgf/cm2   4.1 3.8 4.4
Remarks
For Japan
 
Stop lever angle_07
Pump speed r/min   1500 1500 1500
Pressure kPa   529.5 510 549
Pressure kgf/cm2   5.4 5.2 5.6
Remarks
For Japan
 
Stop lever angle_08
Pump speed r/min   2175 2175 2175
Pressure kPa   676.5 647 706
Pressure kgf/cm2   6.9 6.6 7.2
Remarks
For Japan
 
0000001101
Pump speed r/min   1500 1500 1500
Timer stroke mm   4.5 4.3 4.7
Basic   *
_02
Pump speed r/min   1000 1000 1000
Timer stroke mm   2.25 1.6 2.9
_03
Pump speed r/min   1500 1500 1500
Timer stroke mm   4.5 4.2 4.8
_04
Pump speed r/min   2175 2175 2175
Timer stroke mm   7.55 7.2 7.9
_05
Pump speed r/min   410 310 510
Basic   *
Remarks
C.D.. cancel speed.
 
_06
Pump speed r/min   0 0 0
Timer stroke mm   2.9 2.7 3.1
_07
Pump speed r/min   385 260 510
Remarks
C.D.. cancel speed.
 
_08
Pump speed r/min   1500 1500 1500
Timer stroke mm   4.4 4.2 4.6
Basic   *
Remarks
For Japan
 
_09
Pump speed r/min   1000 1000 1000
Timer stroke mm   2.2 1.6 2.8
Remarks
For Japan
 
_10
Pump speed r/min   1500 1500 1500
Timer stroke mm   4.4 4.1 4.7
Remarks
For Japan
 
_11
Pump speed r/min   2175 2175 2175
Timer stroke mm   7.45 7 7.9
Remarks
For Japan
 
_12
Pump speed r/min   450 350 550
Basic   *
Remarks
For Japan: CSD cancel speed
 
_13
Pump speed r/min   0 0 0
Timer stroke mm   2.9 2.7 3.1
Remarks
For Japan
 
_14
Pump speed r/min   425 300 550
Remarks
For Japan: CSD cancel speed
 
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001501
Pump speed r/min   1250 1250 1250
Atmospheric pressure difference kPa   -21.9 -22.6 -21.2
Atmospheric pressure difference mmHg   -164 -169 -159
Decrease qty mm3/st.   5.4 4.3 6.5
Basic   *
_02
Pump speed r/min   1250 1250 1250
Atmospheric pressure difference kPa   -21.9 -22.6 -21.2
Atmospheric pressure difference mmHg   -164 -169 -159
Decrease qty mm3/st.   5.4 3.6 7.2
_03
Pump speed r/min   1250 1250 1250
Atmospheric pressure difference kPa   -21.9 -22.6 -21.2
Atmospheric pressure difference mmHg   -164 -169 -159
Decrease qty mm3/st.   5.25 4.2 6.3
Basic   *
Remarks
For Japan
 
_04
Pump speed r/min   1250 1250 1250
Atmospheric pressure difference kPa   -21.9 -22.6 -21.2
Atmospheric pressure difference mmHg   -164 -169 -159
Decrease qty mm3/st.   4.95 2.9 7
Remarks
For Japan
 
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   1.6 1.5 1.7
Control lever angle alpha deg.   15 11 19
Control lever angle beta deg.   35 30 40

Test data Ex:

0000001501 ANEROID COMPENSATOR

Test data 104749-1690
ACS adjustment Full load injection quantity at high altitudes and ACS adjusting method 1. Full load injection quantity adjustment (1)Remove the ACS cover and remove the bellows and adjusting shim. (2)Perform all adjustments as per the adjustment standard except for ACS adjustment. 2. ACS adjustment (1)Assemble the ACS cover, bellows and adjusting shim. (2)At pump speed N1, adjust using a shim to obtain the decrease for the altitude shown in the table. X1 = atmospheric pressure X2 = altitude Y = decrease quantity (A) = adjustment value (B) = test value
----------
N1=1250r/min
----------




Information:

Introduction
There have been instances of issues with DEF pumps. After analysis, the cause of the issues has been found as contamination with hydrocarbons.Note: Diesel fuel is an example of a hydrocarbon.The DEF filter is equipped with a compensator located in the center of the filter assembly. If the compensator comes into contact with hydrocarbons, the compensator will swell and is designed to block the filter assembly and protect the DEF pump.Solution
The following procedure is designed to diagnose if the DEF pump has been contaminated with hydrocarbons.
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Ensure that the engine is stopped before any servicing or repair is performed. The Diesel Exhaust Fluid (DEF) system must have completed a proper shutdown. Service on the DEF pump prior to completion of a proper shutdown can result in DEF spray and spillage.
Do not turn off the battery disconnect switch until the indicator lamp has turned off. If the switch is turned off when the indicator lamp is illuminated, the Diesel Exhaust Fluid (DEF) system may not shut down properly. If the DEF system does not shut down properly, DEF could freeze and damage the pump and lines.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Cat Dealer Service Tool Catalog" or refer to Special Publication, PECJ0003, "Cat Shop Supplies and Tools Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Clean water should be used to wash spilled DEF off machine components and surfaces.Note: Wear gloves when handling the DEF filter.
Illustration 1 g06278274
(1) Protective cover
Remove protective cover (1).
Illustration 2 g06278289
(2) DEF filter cap
Use a suitable tool to remove DEF filter cap (2).
Illustration 3 g06278325
(3) Compensator
With the filter installed in the DEF pump, carefully remove compensator (3).
Illustration 4 g06614423
(A) 85 mm (3.3 inch)
(B) 17 mm (0.7 inch)
Check the measurements of compensator (3). Check if the measurements are greater than specified in Illustration 4. This condition indicates that the DEF pump is contaminated with hydrocarbons.
If the measurements indicate contamination, replace the DEF pump filter. Refer to Operation and Maintenance Manual, Diesel Exhaust Fluid Filter - Replace.Flush the DEF tank. Refer to Systems Operation, Testing and Adjusting, Diesel Exhaust Fluid Tank - Flush.
If the measurements are within the specification, continue to follow the appropriate troubleshooting procedure to determine if the DEF pump has a fault.

Have questions with 104749-1690?





Group cross 104749-1690 ZEXEL

Isuzu 

9 460 610 179 
8941274730 
INJECTION-PUMP ASSEMBLY
C223
 
8941274740 
INJECTION-PUMP ASSEMBLY
C223
 
8941274750 
INJECTION-PUMP ASSEMBLY
C223
 
8941274760 
INJECTION-PUMP ASSEMBLY
C223
9 460 615 073 
8941274770 
INJECTION-PUMP ASSEMBLY
C223
9 460 615 076 
8941274980 
INJECTION-PUMP ASSEMBLY
C223
 
8941274990 
INJECTION-PUMP ASSEMBLY
C223
 
8941275000 
INJECTION-PUMP ASSEMBLY
C223
104749-1690  

104749-6520 
9 460 614 697 
8941237250 
INJECTION-PUMP ASSEMBLY
C223
Back to top