Information injection-pump assembly
ZEXEL
104749-0345
1047490345
MAZDA
RF7113800D
rf7113800d

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104749-0345 |
1. | _ | |
2. | FUEL INJECTION PUMP | |
3. | NUMBER PLATE | 146905-4900 |
4. | _ | 146672-3820 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105141-2771 |
8. | Nozzle and Holder | RF71 13 H50 |
9. | Open Pre:MPa(Kqf/cm2) | 13.2{135} |
10. | NOZZLE-HOLDER | 105071-1530 |
11. | NOZZLE |
Scheme ###:
1/6. | [1] | 146601-0100 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP D20 |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12/1. | [1] | 146200-0300 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0001 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-2620 | ROLLER SET |
24. | [1] | 146303-0100 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0120 | CAM PLATE '01'SK3255 |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-0700 | PUMP PLUNGER ' 7' 5-11. |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-3400 | COMPRESSION SPRING K=2.25 |
35/1. | [1] | 146603-0700 | SHIM |
35/1. | [1] | 146603-0800 | SHIM |
35/1. | [1] | 146603-0900 | SHIM |
35/1. | [1] | 146603-1000 | SHIM |
35/1. | [1] | 146603-1100 | SHIM |
35/1. | [1] | 146603-3600 | SHIM |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0700 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0000 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM |
48/1. | [1] | 146603-0100 | SHIM |
48/1. | [1] | 146603-0200 | SHIM |
48/1. | [1] | 146603-0300 | SHIM |
48/1. | [1] | 146603-0400 | SHIM |
48/1. | [1] | 146603-0500 | SHIM |
48/1. | [1] | 146603-0600 | SHIM |
48/1. | [1] | 146690-1400 | SHIM |
48/1. | [1] | 146690-1500 | SHIM |
48/1. | [1] | 146690-1600 | SHIM |
48/1. | [1] | 146690-1700 | SHIM |
48/1. | [1] | 146690-1800 | SHIM |
48/1. | [1] | 146690-1900 | SHIM |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146403-1120 | HYDRAULIC HEAD D9 2X2.0 A0.2H |
50. | [1] | 146403-1120 | HYDRAULIC HEAD D9 2X2.0 A0.2H |
50. | [1] | 146403-1120 | HYDRAULIC HEAD D9 2X2.0 A0.2H |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM |
52/1. | [1] | 146420-0100 | SHIM |
52/1. | [1] | 146420-0200 | SHIM |
52/1. | [1] | 146420-0300 | SHIM |
52/1. | [1] | 146420-0400 | SHIM |
52/1. | [1] | 146420-0500 | SHIM |
52/1. | [1] | 146420-0600 | SHIM |
52/1. | [1] | 146420-0700 | SHIM |
52/1. | [1] | 146420-0800 | SHIM |
52/1. | [1] | 146420-0900 | SHIM |
52/1. | [1] | 146420-1000 | SHIM |
52/1. | [1] | 146420-1100 | SHIM |
52/1. | [1] | 146420-1200 | SHIM |
52/1. | [1] | 146420-1300 | SHIM |
52/1. | [1] | 146420-1400 | SHIM |
52/1. | [1] | 146420-1500 | SHIM |
52/1. | [1] | 146420-1600 | SHIM |
52/1. | [1] | 146420-1700 | SHIM |
52/1. | [1] | 146420-1800 | SHIM |
52/1. | [1] | 146420-1900 | SHIM |
52/1. | [1] | 146420-2000 | SHIM |
52/1. | [1] | 146420-2100 | SHIM |
52/1. | [1] | 146420-2200 | SHIM |
52/1. | [1] | 146420-2300 | SHIM |
52/1. | [1] | 146420-2400 | SHIM |
52/1. | [1] | 146420-2500 | SHIM |
52/1. | [1] | 146420-2600 | SHIM |
52/1. | [1] | 146420-2700 | SHIM |
52/1. | [1] | 146420-2800 | SHIM |
52/1. | [1] | 146420-2900 | SHIM |
52/1. | [1] | 146420-3000 | SHIM |
52/1. | [1] | 146420-3100 | SHIM |
52/1. | [1] | 146420-3200 | SHIM |
52/1. | [1] | 146420-3300 | SHIM |
52/1. | [1] | 146420-3400 | SHIM |
52/1. | [1] | 146420-3500 | SHIM |
52/1. | [1] | 146420-3600 | SHIM |
52/1. | [1] | 146420-3700 | SHIM |
52/1. | [1] | 146420-3800 | SHIM |
52/1. | [1] | 146420-3900 | SHIM |
52/1. | [1] | 146420-4000 | SHIM |
52/1. | [1] | 146420-4100 | SHIM |
52/1. | [1] | 146420-4200 | SHIM |
52/1. | [1] | 146420-4300 | SHIM |
52/1. | [1] | 146420-4400 | SHIM |
52/1. | [1] | 146420-4500 | SHIM |
52/1. | [1] | 146420-4600 | SHIM |
52/1. | [1] | 146420-4700 | SHIM |
52/1. | [1] | 146420-4800 | SHIM |
52/1. | [1] | 146420-4900 | SHIM |
52/1. | [1] | 146420-5000 | SHIM |
52/1. | [1] | 146420-5100 | SHIM |
52/1. | [1] | 146420-5200 | SHIM |
52/1. | [1] | 146420-5300 | SHIM |
52/1. | [1] | 146420-5400 | SHIM |
52/1. | [1] | 146420-5500 | SHIM |
52/1. | [1] | 146420-5600 | SHIM |
52/1. | [1] | 146420-5700 | SHIM |
52/1. | [1] | 146420-5800 | SHIM |
54. | [4] | 146433-0100 | GASKET |
55. | [4] | 146430-2420 | DELIVERY-VALVE ASSEMBLY 'VE24'VR301400L |
56. | [4] | 146432-0000 | COMPRESSION SPRING K=0.48 |
58. | [4] | 146440-0220 | FITTING D0.45 L=50 |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146702-7420 | MANIFOLD-PRESSURE COMP. P141 |
67/1. | [1] | 146805-2020 | GOVERNOR COVER |
67/14. | [1] | 146621-1700 | UNION NUT |
67/16. | [1] | 146526-3000 | BLEEDER SCREW |
67/23. | [1] | 146927-9620 | BRACKET P141 |
67/31. | [1] | 146710-0800 | BUSHING |
67/32. | [1] | 146711-0000 | PLATE |
67/33. | [1] | 139218-0400 | UNION NUT |
67/34. | [1] | 146712-0700 | BEARING PIN 15.5 |
67/35. | [1] | 146621-0300 | UNION NUT |
67/36. | [1] | 146600-1400 | O-RING |
67/37. | [1] | 146710-0100 | BUSHING |
67/38. | [1] | 139506-0200 | GASKET |
67/39. | [1] | 146620-0300 | CAPSULE |
67/40. | [1] | 026512-1540 | GASKET |
67/41. | [1] | 146713-0400 | ADJUSTING PIN |
67/42. | [2] | 146714-0000 | PLATE |
67/43. | [1] | 146715-0000 | DIAPHRAGM |
67/44. | [1] | 139306-0100 | LOCKING WASHER |
67/45. | [1] | 013030-6040 | UNION NUT |
67/46. | [1] | 146716-0000 | UNION NUT |
67/47. | [1] | 146717-1100 | COILED SPRING K=1.4 L=22. |
67/48/1. | [1] | 146720-0000 | SPACER BUSHING |
67/48/1. | [1] | 146720-0100 | SPACER BUSHING |
67/48/1. | [1] | 146720-0200 | SPACER BUSHING |
67/48/1. | [1] | 146720-0300 | SPACER BUSHING |
67/48/1. | [1] | 146720-0400 | SPACER BUSHING |
67/48/1. | [1] | 146720-0500 | SPACER BUSHING |
67/48/1. | [1] | 146720-0600 | SPACER BUSHING |
67/48/1. | [1] | 146720-0700 | SPACER BUSHING |
67/48/1. | [1] | 146720-0800 | SPACER BUSHING |
67/48/1. | [1] | 146720-0900 | SPACER BUSHING |
67/48/1. | [1] | 146720-1000 | SPACER BUSHING |
67/48/1. | [1] | 146720-1100 | SPACER BUSHING |
67/48/1. | [1] | 146720-1200 | SPACER BUSHING |
67/48/1. | [1] | 146720-1300 | SPACER BUSHING |
67/48/1. | [1] | 146720-1400 | SPACER BUSHING |
67/48/1. | [1] | 146720-1500 | SPACER BUSHING |
67/48/1. | [1] | 146720-1600 | SPACER BUSHING |
67/48/1. | [1] | 146720-1700 | SPACER BUSHING |
67/48/1. | [1] | 146720-1800 | SPACER BUSHING |
67/48/1. | [1] | 146720-1900 | SPACER BUSHING |
67/48/1. | [1] | 146720-2000 | SPACER BUSHING |
67/48/1. | [1] | 146720-2100 | SPACER BUSHING |
67/48/1. | [1] | 146720-2200 | SPACER BUSHING |
67/48/1. | [1] | 146720-2300 | SPACER BUSHING |
67/48/1. | [1] | 146720-2400 | SPACER BUSHING |
67/48/1. | [1] | 146720-2500 | SPACER BUSHING |
67/48/1. | [1] | 146720-2600 | SPACER BUSHING |
67/48/1. | [1] | 146720-2700 | SPACER BUSHING |
67/48/1. | [1] | 146720-2800 | SPACER BUSHING |
67/48/1. | [1] | 146720-2900 | SPACER BUSHING |
67/48/1. | [1] | 146720-4500 | SPACER BUSHING BCS L=1.8 |
67/48/1. | [1] | 146720-4600 | SPACER BUSHING BCS L=1.9 |
67/48/1. | [1] | 146720-4700 | SPACER BUSHING BCS L=2.0 |
67/48/1. | [1] | 146720-4800 | SPACER BUSHING BCS L=2.1 |
67/48/1. | [1] | 146720-4900 | SPACER BUSHING BCS L=2.2 |
67/48/1. | [1] | 146720-5000 | SPACER BUSHING BCS L=2.3 |
67/48/1. | [1] | 146720-5100 | SPACER BUSHING BCS L=2.4 |
67/48/1. | [1] | 146720-5200 | SPACER BUSHING BCS L=2.5 |
67/48/1. | [1] | 146720-5300 | SPACER BUSHING BCS L=2.6 |
67/49. | [1] | 146721-2120 | COVER |
67/54. | [4] | 139006-4500 | BLEEDER SCREW |
67/56. | [1] | 146723-0300 | CONTROL LEVER |
67/57. | [1] | 146712-0100 | BEARING PIN |
67/58. | [2] | 146620-0600 | CAPSULE |
67/59. | [2] | 026506-1040 | GASKET |
67/60. | [1] | 146724-0300 | ELEMENT |
67/61. | [1] | 146724-0600 | CAPSULE |
67/78. | [1] | 146600-1000 | SEAL RING |
67/100. | [1] | 146925-1100 | BRACKET |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3400 | THREADED PIN |
67/201B. | [1] | 146545-3500 | THREADED PIN |
67/201C. | [1] | 146545-3600 | THREADED PIN |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146513-2420 | CONTROL SHAFT R=10 S R |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146535-7120 | CONTROL LEVER '571' |
72B. | [1] | 146535-7220 | CONTROL LEVER '572' |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT |
80. | [1] | 146547-5620 | CONTROL LEVER MAZDA P141 |
86. | [2] | 146549-4121 | RACK |
95. | [1] | 146551-8020 | FULCRUM LEVER I=2.2 SKH51 |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0420 | GOVERNOR SHAFT R-L/T |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM |
110/1. | [1] | 146571-0100 | SHIM |
110/1. | [1] | 146571-0200 | SHIM |
110/1. | [1] | 146571-0300 | SHIM |
110/1. | [1] | 146571-0400 | SHIM |
110/1. | [1] | 146571-0500 | SHIM |
110/1. | [1] | 146571-0600 | SHIM |
110/1. | [1] | 146571-0700 | SHIM |
110/1. | [1] | 146571-0800 | SHIM |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER |
115. | [1] | 146575-5000 | SLIDING SLEEVE '50' D0.5G1-0.3 |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG |
117/1. | [1] | 146577-1900 | PLUG |
117/1. | [1] | 146577-2000 | PLUG |
117/1. | [1] | 146577-2100 | PLUG |
117/1. | [1] | 146577-2200 | PLUG |
117/1. | [1] | 146577-2300 | PLUG |
117/1. | [1] | 146577-2400 | PLUG |
117/1. | [1] | 146577-2500 | PLUG |
117/1. | [1] | 146577-2600 | PLUG |
117/1. | [1] | 146577-2700 | PLUG |
117/1. | [1] | 146577-2800 | PLUG |
117/1. | [1] | 146577-2900 | PLUG |
117/1. | [1] | 146577-3000 | PLUG |
117/1. | [1] | 146577-3100 | PLUG |
117/1. | [1] | 146577-3200 | PLUG |
117/1. | [1] | 146577-3300 | PLUG |
117/1. | [1] | 146577-6700 | PLUG |
117/1. | [1] | 146577-6800 | PLUG |
117/1. | [1] | 146577-6900 | PLUG |
117/1. | [1] | 146577-7000 | PLUG |
117/1. | [1] | 146577-7100 | PLUG |
117/1. | [1] | 146577-7200 | PLUG |
117/1. | [1] | 146577-7300 | PLUG |
117/1. | [1] | 146577-7400 | PLUG |
117/1. | [1] | 146577-7500 | PLUG |
117/1. | [1] | 146577-7600 | PLUG |
117/1. | [1] | 146577-7700 | PLUG |
117/1. | [1] | 146577-7800 | PLUG |
117/1. | [1] | 146577-7900 | PLUG |
117/1. | [1] | 146577-8000 | PLUG |
117/1. | [1] | 146577-8100 | PLUG |
117/1. | [1] | 146877-0000 | PLUG |
117/1. | [1] | 146877-0100 | PLUG |
117/1. | [1] | 146877-0200 | PLUG |
117/1. | [1] | 146877-0300 | PLUG |
123. | [4] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-0020 | CAPSULE D14 |
130/2. | [1] | 026508-1140 | GASKET |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0920 | CONTROL VALVE '09'4XD1.6K=2.0 |
136. | [1] | 146120-0020 | OVER FLOW VALVE |
137. | [2] | 026512-1540 | GASKET |
138. | [1] | 146608-6920 | INLET UNION OUT B2 |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 029470-4030 | WOODRUFF KEY |
220. | [1] | 146587-3800 | COILED SPRING |
221. | [1] | 146927-9820 | BRACKET P141 |
236. | [1] | 139006-4800 | BLEEDER SCREW |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-4320 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-7220 | WIRE ' 72' 12V |
243. | [1] | 146621-1000 | UNION NUT |
245. | [3] | 026512-1540 | GASKET |
246. | [1] | 139812-1900 | EYE BOLT |
247. | [1] | 146608-7120 | INLET UNION IN B3 |
248. | [1] | 146614-0200 | SPACER BUSHING |
252. | [1] | 139006-4400 | BLEEDER SCREW |
275. | [1] | 146612-5400 | BRACKET |
276. | [2] | 010010-1640 | BLEEDER SCREW |
280. | [1] | 146360-9320 | START ADVANCE ASSY P141 |
281. | [1] | 146600-0800 | O-RING |
294. | [1] | 146608-6720 | INLET UNION B3 |
800S. | [1] | 146019-4620 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
804S. | [1] | 146232-0220 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-2420 | REPAIR SET |
835S. | [1] | 146598-1000 | CAP LOAD |
836S/1. | [1] | 146598-0600 | CAP SPEED L=18 |
836S/1. | [1] | 146598-0600 | CAP SPEED L=18 |
836S/1. | [1] | 146598-0700 | CAP SPEED L=21 |
836S/1. | [1] | 146598-0800 | CAP SPEED L=24 |
836S/1. | [1] | 146598-0900 | CAP SPEED L=27 |
890S. | [1] | 146949-0020 | LEVER GROUP |
903. | [1] | 146672-3820 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING |
906. | [1] | 146905-4900 | NAMEPLATE P141 BCS |
Include in #2:
104749-0345
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
password protection for the CCM is initially enabled. Password protection may be necessary for some applications. Use the following procedure to enable password protection. Changing the password protection can be done with the PC software for the CCM . The password protection can also be changed by using a host device to write the IIDs.Disabling PasswordsTo disable the passwords, the AA12 and AA8A PIDs must be used.Note: Refer to the Operation and Maintenance Manual, "Parameter Identifiers for General Usage".
Use IID 34 with a unit number of 61. Write to PID AA8A with the level 3 password. This will set the security level in the CCM to level 3. The message will be 5000340C0061AA8Ab1b2b3b4b5b6b7b8cs. The example above shows that b1 through b8 are the ASCII characters of the password. If the password is all spaces, simply end the message after PID AA8A. Do not include any of the data bytes. The CCM will automatically add spaces when a character is not present.
Use IID 34 with a unit number of 61. Write PID AA 12 with bit 3 set. This will disable the password protection. The message will be 500034050061AA1204cs. This message will disable the passwords. Baud rate changes will be enabled. The CCM will be set for a direct connection. Bits 1 and 2 should be set to 1 if the last two items need to be set the other way. Note: When the passwords are disabled, all three passwords are set to all blanks (spaces).Enabling PasswordsThe AA12 and the F012 PIDs must be used in order to enable the password protection.Note: Refer to the Operation and Maintenance Manual, "Parameter Identifiers for General Usage".
Use IID 34 with a unit number of 61. Write to PID AA12 to clear bit 3. The message format will be 500034050061AA1200cs. This message will enable the following items: passwords, change of baud rate and set the CCM for direct connect. Bits 1 and 2 should be set to 1 if the last two items need to be set the other way.
In order to enable the changes, the power to the CCM must be cycled or the security level must be written to zero. The security level is written to zero by using IID 34. The message will be 500034050061F01200cs. Note: When the passwords were disabled, each character was set to a blank or space. Set the level 3 password on the CCM to something other than spaces.
Use IID 34 with a unit number of 61. Write to PID AA8A with the level 3 password. This will set the security level in the CCM to level 3. The message will be 5000340C0061AA8Ab1b2b3b4b5b6b7b8cs. The example above shows that b1 through b8 are the ASCII characters of the password. If the password is all spaces, simply end the message after PID AA8A. Do not include any of the data bytes. The CCM will automatically add spaces when a character is not present.
Use IID 34 with a unit number of 61. Write PID AA 12 with bit 3 set. This will disable the password protection. The message will be 500034050061AA1204cs. This message will disable the passwords. Baud rate changes will be enabled. The CCM will be set for a direct connection. Bits 1 and 2 should be set to 1 if the last two items need to be set the other way. Note: When the passwords are disabled, all three passwords are set to all blanks (spaces).Enabling PasswordsThe AA12 and the F012 PIDs must be used in order to enable the password protection.Note: Refer to the Operation and Maintenance Manual, "Parameter Identifiers for General Usage".
Use IID 34 with a unit number of 61. Write to PID AA12 to clear bit 3. The message format will be 500034050061AA1200cs. This message will enable the following items: passwords, change of baud rate and set the CCM for direct connect. Bits 1 and 2 should be set to 1 if the last two items need to be set the other way.
In order to enable the changes, the power to the CCM must be cycled or the security level must be written to zero. The security level is written to zero by using IID 34. The message will be 500034050061F01200cs. Note: When the passwords were disabled, each character was set to a blank or space. Set the level 3 password on the CCM to something other than spaces.