Information injection-pump assembly
BOSCH
9 460 614 634
9460614634
ZEXEL
104748-1280
1047481280
ISUZU
8942439110
8942439110
Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104748-1280 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104648-1140 |
3. | NUMBER PLATE | 146633-2500 |
4. | _ | 146672-0020 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | 146620-2220 |
7. | NOZZLE AND HOLDER ASSY | 105141-2061 |
8. | Nozzle and Holder | |
9. | Open Pre:MPa(Kqf/cm2) | 11.8{120} |
10. | NOZZLE-HOLDER | 105071-1380 |
11. | NOZZLE | 105000-1770 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0300 | DRIVE SHAFT |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-1720 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0120 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-1600 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM D17.5&7.5T0.60 |
34. | [1] | 146302-3500 | COMPRESSION SPRING |
35/1. | [0] | 146603-0700 | SHIM D17.5&7.5T0.60 |
35/1. | [0] | 146603-0800 | SHIM D17.5&7.5T0.70 |
35/1. | [0] | 146603-0900 | SHIM D17.5&7.5T0.90 |
35/1. | [0] | 146603-1000 | SHIM D17.5&7.5T1.00 |
35/1. | [0] | 146603-1100 | SHIM D17.5&7.5T1.20 |
35/1. | [0] | 146603-3600 | SHIM D17.5&7.5T2.40 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0000 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146340-1020 | START ADVANCE ASSY |
39/1. | [1] | 146342-2900 | DIAPHRAGM HOUSING |
39/2. | [1] | 146342-3020 | PUMP PLUNGER |
39/3. | [1] | 146342-3120 | COVER |
39/4. | [1] | 146342-3700 | COILED SPRING |
39/5. | [1] | 146342-3800 | COILED SPRING |
39/6. | [1] | 146602-1600 | PLAIN WASHER |
39/7/1. | [0] | 146603-4300 | SHIM T0.30 |
39/7/1. | [0] | 146603-4400 | SHIM T0.50 |
39/7/1. | [0] | 146603-4500 | SHIM T0.70 |
39/7/1. | [0] | 146603-4600 | SHIM T1.00 |
39/7/1. | [0] | 146603-4700 | SHIM T1.20 |
39/9. | [1] | 146342-2800 | CAPSULE |
39/10. | [1] | 016500-2220 | O-RING |
39/11. | [4] | 020106-1640 | BLEEDER SCREW M6P1.0L14 |
39/14. | [1] | 131420-0400 | BLEEDER SCREW |
39/15. | [1] | 026506-1040 | GASKET D9.9&6.2T1 |
40. | [2] | 013020-6040 | UNION NUT M6P1H5 |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM D17&5.2T2.1 |
48/1. | [1] | 146690-5900 | SHIM D17&5.2T2.2 |
48/1. | [1] | 146690-6000 | SHIM D17&5.2T2.3 |
48/1. | [1] | 146690-6100 | SHIM D17&5.2T2.4 |
48/1. | [1] | 146690-6200 | SHIM D17&5.2T2.5 |
48/1. | [1] | 146690-6300 | SHIM D17&5.2T2.6 |
48/1. | [1] | 146690-6400 | SHIM D17&5.2T2.7 |
48/1. | [1] | 146690-6500 | SHIM D17&5.2T2.8 |
48/1. | [1] | 146690-6600 | SHIM D17&5.2T2.9 |
48/1. | [1] | 146690-6700 | SHIM D17&5.2T3.0 |
48/1. | [1] | 146690-6800 | SHIM D17&5.2T3.1 |
48/1. | [1] | 146690-6900 | SHIM D17&5.2T3.2 |
48/1. | [1] | 146690-7000 | SHIM D17&5.2T3.3 |
48/1. | [1] | 146690-7100 | SHIM D17&5.2T3.4 |
48/1. | [1] | 146690-7200 | SHIM D17&5.2T0.4 |
48/1. | [1] | 146690-7300 | SHIM D17&5.2T0.6 |
48/1. | [1] | 146690-7400 | SHIM D17&5.2T0.7 |
48/1. | [1] | 146690-7500 | SHIM D17&5.2T1.9 |
48/1. | [1] | 146690-7800 | SHIM D17&5.2T0.2 |
49. | [2] | 146234-0500 | GUIDE PIN |
50. | [1] | 146400-5120 | HYDRAULIC HEAD |
50. | [1] | 146400-5120 | HYDRAULIC HEAD |
50. | [1] | 146400-5120 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [4] | 146430-0020 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0000 | COMPRESSION SPRING |
58. | [4] | 146440-0120 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146705-0420 | ANEROID CAPSULE |
67/1. | [1] | 146505-3920 | GOVERNOR COVER |
67/13. | [1] | 013020-6040 | UNION NUT M6P1H5 |
67/14. | [1] | 029240-6010 | UNION NUT M6P1.0H5* |
67/15. | [1] | 146526-1800 | BLEEDER SCREW |
67/16. | [1] | 146526-1000 | FLAT-HEAD SCREW |
67/23. | [1] | 146613-8000 | BRACKET |
67/24. | [2] | 020106-1640 | BLEEDER SCREW M6P1.0L14 |
67/26. | [1] | 146613-3720 | BRACKET |
67/31. | [1] | 146710-0300 | BUSHING |
67/32. | [1] | 146602-1400 | PLAIN WASHER |
67/33. | [1] | 146716-0100 | UNION NUT |
67/34/1. | [1] | 146712-0200 | BEARING PIN L24.60 |
67/34/1. | [1] | 146712-0300 | BEARING PIN L24.80 |
67/34/1. | [1] | 146712-0400 | BEARING PIN L25.00 |
67/34/1. | [1] | 146712-0500 | BEARING PIN L25.20 |
67/34/1. | [1] | 146712-0600 | BEARING PIN L25.40 |
67/35. | [1] | 146621-0300 | UNION NUT |
67/36. | [1] | 146600-1400 | O-RING |
67/37. | [1] | 146710-0100 | BUSHING |
67/38. | [1] | 139506-0200 | GASKET D8.9&6.8T1.00 |
67/39. | [1] | 146620-0300 | CAPSULE |
67/40. | [1] | 026512-1540 | GASKET D15.4&12.2T1.50 |
67/41. | [1] | 146713-0500 | ADJUSTING PIN |
67/46. | [1] | 146602-1300 | PLAIN WASHER |
67/47. | [1] | 146717-0200 | COILED SPRING |
67/49. | [1] | 146721-0420 | COVER |
67/54. | [4] | 139006-4400 | BLEEDER SCREW |
67/56. | [1] | 146723-0120 | CONTROL LEVER |
67/57. | [1] | 146712-0100 | BEARING PIN |
67/58. | [2] | 146620-0600 | CAPSULE |
67/59. | [2] | 026506-1040 | GASKET D9.9&6.2T1 |
67/60. | [1] | 146724-0020 | AIR FILTER |
67/64. | [1] | 146613-8500 | BRACKET |
67/70. | [1] | 146600-2000 | SEAL RING |
67/71. | [1] | 146714-0100 | SLOTTED WASHER |
67/72. | [1] | 016010-0920 | LOCKING WASHER |
67/73. | [1] | 146715-0120 | BELLOWS |
67/74/1. | [0] | 146603-3700 | SHIM T0.20 |
67/74/1. | [0] | 146603-3800 | SHIM T0.30 |
67/74/1. | [0] | 146603-3900 | SHIM T0.50 |
67/74/1. | [0] | 146603-4000 | SHIM T0.70 |
67/74/1. | [0] | 146603-4100 | SHIM T1.00 |
67/74/1. | [0] | 146603-4200 | SHIM T1.50 |
67/78. | [1] | 146600-1000 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-0300 | THREADED PIN L53.00 |
67/201B. | [1] | 146545-0400 | THREADED PIN L55.00 |
67/201C. | [1] | 146545-0500 | THREADED PIN L57.00 |
67/202. | [1] | 139208-0100 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146510-0320 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146531-0820 | CONTROL LEVER |
72B. | [1] | 146531-0920 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT M6P1H5 |
95. | [1] | 146551-1220 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146575-0000 | SLIDING SLEEVE |
116. | [1] | 146576-0000 | SEALING CAP |
117/1. | [1] | 146577-0000 | PLUG L1.70 |
117/1. | [1] | 146577-0100 | PLUG L1.90 |
117/1. | [1] | 146577-0200 | PLUG L2.10 |
117/1. | [1] | 146577-0300 | PLUG L2.30 |
117/1. | [1] | 146577-0400 | PLUG L2.50 |
117/1. | [1] | 146577-0500 | PLUG L2.70 |
117/1. | [1] | 146577-0600 | PLUG L2.90 |
117/1. | [1] | 146577-0700 | PLUG L3.10 |
117/1. | [1] | 146577-0800 | PLUG L3.30 |
117/1. | [1] | 146577-0900 | PLUG L3.50 |
117/1. | [1] | 146577-1000 | PLUG L3.70 |
117/1. | [1] | 146577-1100 | PLUG L3.90 |
117/1. | [1] | 146577-1200 | PLUG L4.10 |
117/1. | [1] | 146577-1300 | PLUG L4.30 |
117/1. | [1] | 146577-1400 | PLUG L4.50 |
117/1. | [1] | 146577-1500 | PLUG L4.70 |
117/1. | [1] | 146577-1600 | PLUG L4.90 |
117/1. | [1] | 146577-1700 | PLUG L5.10 |
117/1. | [1] | 146577-5000 | PLUG L1.8 |
117/1. | [1] | 146577-5100 | PLUG L2.0 |
117/1. | [1] | 146577-5200 | PLUG L2.2 |
117/1. | [1] | 146577-5300 | PLUG L2.4 |
117/1. | [1] | 146577-5400 | PLUG L2.6 |
117/1. | [1] | 146577-5500 | PLUG L2.8 |
117/1. | [1] | 146577-5600 | PLUG L3.0 |
117/1. | [1] | 146577-5700 | PLUG L3.2 |
117/1. | [1] | 146577-5800 | PLUG L3.4 |
117/1. | [1] | 146577-5900 | PLUG L3.6 |
117/1. | [1] | 146577-6000 | PLUG L3.8 |
117/1. | [1] | 146577-6100 | PLUG L4.0 |
117/1. | [1] | 146577-6200 | PLUG L4.2 |
117/1. | [1] | 146577-6300 | PLUG L4.4 |
117/1. | [1] | 146577-6400 | PLUG L4.6 |
117/1. | [1] | 146577-6500 | PLUG L4.8 |
117/1. | [1] | 146577-6600 | PLUG L5.0 |
117/1. | [1] | 146877-0400 | PLUG |
117/1. | [1] | 146877-0500 | PLUG |
117/1. | [1] | 146877-0600 | PLUG |
117/1. | [1] | 146877-0700 | PLUG |
117/1. | [1] | 146877-4300 | PLUG |
117/1. | [1] | 146877-4400 | PLUG |
117/1. | [1] | 146877-4500 | PLUG |
117/1. | [1] | 146877-4600 | PLUG |
123. | [4] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
135B. | [1] | 146110-1020 | CONTROL VALVE |
135B/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-0120 | OVER FLOW VALVE |
137. | [2] | 139512-0500 | GASKET |
137. | [2] | 139512-0500 | GASKET |
138. | [1] | 146610-6820 | PIPE |
150. | [2] | 014020-6140 | PLAIN WASHER |
151. | [2] | 139010-0300 | STUD |
153. | [1] | 139808-0301 | EYE BOLT |
154. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 029470-4030 | WOODRUFF KEY |
214. | [1] | 146541-1900 | BUSHING |
216. | [1] | 146541-2000 | BUSHING |
220. | [1] | 146587-2600 | COILED SPRING |
230. | [1] | 146613-7400 | BRACKET |
231. | [2] | 139106-0500 | FLAT-HEAD SCREW M6P1.0H25 |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-7320 | WIRE |
243. | [1] | 146621-1000 | UNION NUT |
244. | [1] | 146613-5620 | PLATE |
245. | [3] | 026512-1840 | GASKET D17.9&12.2T1.50 |
245. | [3] | 026512-1840 | GASKET D17.9&12.2T1.50 |
246. | [1] | 146125-0020 | EYE BOLT |
247. | [1] | 146610-7120 | INLET UNION |
248. | [1] | 146614-0200 | SPACER BUSHING |
275. | [1] | 146612-0120 | BRACKET |
276. | [2] | 010010-2040 | BLEEDER SCREW M10P1.5L20 |
277. | [2] | 014111-0440 | LOCKING WASHER |
800S. | [1] | 146009-4220 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0320 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
811S. | [1] | 146600-2120 | PARTS SET |
812S. | [1] | 146600-2220 | PARTS SET |
821S. | [1] | 146210-5720 | ROLLER SET |
903. | [1] | 146672-0020 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING &13W1.9 |
904. | [1] | 146613-5820 | BRACKET |
904/2. | [1] | 139106-0400 | FLAT-HEAD SCREW M6P1.0H12 |
905. | [1] | 146620-2220 | ACTUATOR |
906. | [1] | 146633-2500 | NAMEPLATE |
911. | [1] | 146531-1220 | PLATE |
Include in #2:
104748-1280
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
104748-1280
9 460 614 634
8942439110 ISUZU
INJECTION-PUMP ASSEMBLY
4FB1 K 11CJ INJECTION PUMP ASSY VE4 VE
4FB1 K 11CJ INJECTION PUMP ASSY VE4 VE
Information:
Low Gears #1 RPM Limit:
Engine rpm limited below "Low Gear #1 Turn Off Speed". PEEC III will pause at this rpm, then allow slow acceleration up to Top Engine Limit. This is to encourage the driver to shift to the next highest gear. Maximum 3000 rpmMinimum 1100 rpmDefault 3000 rpmLow Gears #1 Turn Off:
Vehicle Speed where "Low Gears #1 RPM Limit" turns off. This must be matched with "Low Gear #1 RPM Limit" to the specific drive train for best performance. Maximum 30 mphMinimum 0 mphDefault 30 mphLow Gears #2 RPM Limit:
Similar to "Low Gears #1 RPM Limit". Typically programmed to slightly higher rpm. Maximum 3000 rpmMinimum 1100 rpmDefault 3000 rpmLow Gears #2 Turn Off:
Similar to "Low Gears #1 Turn Off". Typically programmed to a slightly higher vehicle speed. Maximum 50 mphMinimum 0 mphDefault 50 mphHigh Gear RPM Limit:
Engine RPM Limit when vehicle speed is above "High Gear Turn On Speed". This is a "hard" limit: PEEC III will not power the engine above this limit. This is to encourage the driver to shift up into overdrive or top gear. Maximum 3000 rpmMinimum 1300 rpmDefault 3000 rpmHigh Gear Turn On Speed:
Vehicle Speed where "High Gear RPM Limit" turns on. This must be matched to the specific drive train for best performance. Maximum 127 mphMinimum 30 mphDefault 127 mphEngine Parameters
Rating Number:
Number of rating within horsepower family. The personality module defines the horsepower family (such as 350 hp) and may contain several ratings within that family. The rating number defines which rating is used (such as 350 hp @ 1900 rpm or 330 hp @ 1700 rpm) within the family.Top Engine Limit:
Maximum engine RPM when the engine is under load. The engine will still achieve Rated RPM under no load conditions. Maximum Rated rpm + 20 rpmMinimum Rated rpm - 79 rpmDefault Rated rpm + 20 rpmLow Idle RPM:
Minimum engine RPM which may be programmed to any value between 600 RPM to 750 RPM range.Idle Shutdown Time:
Time (in minutes) that engine will idle before shutting down (between 3 and 60 minutes). Engine will only shutdown if PEEC III sees no engine load, no vehicle speed, and the park brake is set. If this parameter is programmed to zero, this feature is disabled and the engine will idle until the key switch is turned OFF.Passwords
Factory Passwords
Factory passwords are required to perform each of the following four functions:1. Program a New ECM When an ECM is replaced, the System Configuration Parameters must be programmed into the new ECM. These parameters are protected by factory passwords.2. Rerate Engine to another Engine Family This requires changing the personality Module Code, which is protected by factory passwords.3. Read Customer Passwords If the owner loses his customer passwords, he will not be able to program customer parameters. Using factory passwords, one can read customer passwords, then use those customer passwords to program customer parameters.4. Clear Certain Diagnostic Codes Only Diagnostic Code 23-02 (Excessive Engine Power) requires factory passwords to clear once it is logged. Certain other
Engine rpm limited below "Low Gear #1 Turn Off Speed". PEEC III will pause at this rpm, then allow slow acceleration up to Top Engine Limit. This is to encourage the driver to shift to the next highest gear. Maximum 3000 rpmMinimum 1100 rpmDefault 3000 rpmLow Gears #1 Turn Off:
Vehicle Speed where "Low Gears #1 RPM Limit" turns off. This must be matched with "Low Gear #1 RPM Limit" to the specific drive train for best performance. Maximum 30 mphMinimum 0 mphDefault 30 mphLow Gears #2 RPM Limit:
Similar to "Low Gears #1 RPM Limit". Typically programmed to slightly higher rpm. Maximum 3000 rpmMinimum 1100 rpmDefault 3000 rpmLow Gears #2 Turn Off:
Similar to "Low Gears #1 Turn Off". Typically programmed to a slightly higher vehicle speed. Maximum 50 mphMinimum 0 mphDefault 50 mphHigh Gear RPM Limit:
Engine RPM Limit when vehicle speed is above "High Gear Turn On Speed". This is a "hard" limit: PEEC III will not power the engine above this limit. This is to encourage the driver to shift up into overdrive or top gear. Maximum 3000 rpmMinimum 1300 rpmDefault 3000 rpmHigh Gear Turn On Speed:
Vehicle Speed where "High Gear RPM Limit" turns on. This must be matched to the specific drive train for best performance. Maximum 127 mphMinimum 30 mphDefault 127 mphEngine Parameters
Rating Number:
Number of rating within horsepower family. The personality module defines the horsepower family (such as 350 hp) and may contain several ratings within that family. The rating number defines which rating is used (such as 350 hp @ 1900 rpm or 330 hp @ 1700 rpm) within the family.Top Engine Limit:
Maximum engine RPM when the engine is under load. The engine will still achieve Rated RPM under no load conditions. Maximum Rated rpm + 20 rpmMinimum Rated rpm - 79 rpmDefault Rated rpm + 20 rpmLow Idle RPM:
Minimum engine RPM which may be programmed to any value between 600 RPM to 750 RPM range.Idle Shutdown Time:
Time (in minutes) that engine will idle before shutting down (between 3 and 60 minutes). Engine will only shutdown if PEEC III sees no engine load, no vehicle speed, and the park brake is set. If this parameter is programmed to zero, this feature is disabled and the engine will idle until the key switch is turned OFF.Passwords
Factory Passwords
Factory passwords are required to perform each of the following four functions:1. Program a New ECM When an ECM is replaced, the System Configuration Parameters must be programmed into the new ECM. These parameters are protected by factory passwords.2. Rerate Engine to another Engine Family This requires changing the personality Module Code, which is protected by factory passwords.3. Read Customer Passwords If the owner loses his customer passwords, he will not be able to program customer parameters. Using factory passwords, one can read customer passwords, then use those customer passwords to program customer parameters.4. Clear Certain Diagnostic Codes Only Diagnostic Code 23-02 (Excessive Engine Power) requires factory passwords to clear once it is logged. Certain other
Have questions with 104748-1280?
Group cross 104748-1280 ZEXEL
Isuzu
104748-1280
9 460 614 634
8942439110
INJECTION-PUMP ASSEMBLY
4FB1
4FB1