Information injection-pump assembly
ZEXEL
104748-0253
1047480253
MAZDA
RF4313800C
rf4313800c

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104748-0253 |
1. | _ | |
2. | FUEL INJECTION PUMP | |
3. | NUMBER PLATE | 146642-1600 |
4. | _ | 146672-0220 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105141-2440 |
8. | Nozzle and Holder | R201 13 640 |
9. | Open Pre:MPa(Kqf/cm2) | 13.2{135} |
10. | NOZZLE-HOLDER | 105071-0710 |
11. | NOZZLE | 105000-1740 |
Scheme ###:
1/6. | [1] | 146601-0100 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP D20 |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12/1. | [1] | 146200-0300 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0001 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-1220 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0220 | CAM PLATE '02'SK3074 |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-2400 | PUMP PLUNGER ' 24' 5-9.5 |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-0100 | COMPRESSION SPRING K=2.25 |
35/1. | [1] | 146603-0700 | SHIM |
35/1. | [1] | 146603-0800 | SHIM |
35/1. | [1] | 146603-0900 | SHIM |
35/1. | [1] | 146603-1000 | SHIM |
35/1. | [1] | 146603-1100 | SHIM |
35/1. | [1] | 146603-3600 | SHIM |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0000 | COVER |
38. | [2] | 139106-0000 | FLAT-HEAD SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 139106-0000 | FLAT-HEAD SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0000 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM |
48/1. | [1] | 146603-0100 | SHIM |
48/1. | [1] | 146603-0200 | SHIM |
48/1. | [1] | 146603-0300 | SHIM |
48/1. | [1] | 146603-0400 | SHIM |
48/1. | [1] | 146603-0500 | SHIM |
48/1. | [1] | 146603-0600 | SHIM |
48/1. | [1] | 146690-1400 | SHIM |
48/1. | [1] | 146690-1500 | SHIM |
48/1. | [1] | 146690-1600 | SHIM |
48/1. | [1] | 146690-1700 | SHIM |
48/1. | [1] | 146690-1800 | SHIM |
48/1. | [1] | 146690-1900 | SHIM |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146400-5320 | HYDRAULIC HEAD |
50. | [1] | 146400-5320 | HYDRAULIC HEAD |
50. | [1] | 146400-5320 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM |
52/1. | [1] | 146420-0100 | SHIM |
52/1. | [1] | 146420-0200 | SHIM |
52/1. | [1] | 146420-0300 | SHIM |
52/1. | [1] | 146420-0400 | SHIM |
52/1. | [1] | 146420-0500 | SHIM |
52/1. | [1] | 146420-0600 | SHIM |
52/1. | [1] | 146420-0700 | SHIM |
52/1. | [1] | 146420-0800 | SHIM |
52/1. | [1] | 146420-0900 | SHIM |
52/1. | [1] | 146420-1000 | SHIM |
52/1. | [1] | 146420-1100 | SHIM |
52/1. | [1] | 146420-1200 | SHIM |
52/1. | [1] | 146420-1300 | SHIM |
52/1. | [1] | 146420-1400 | SHIM |
52/1. | [1] | 146420-1500 | SHIM |
52/1. | [1] | 146420-1600 | SHIM |
52/1. | [1] | 146420-1700 | SHIM |
52/1. | [1] | 146420-1800 | SHIM |
52/1. | [1] | 146420-1900 | SHIM |
52/1. | [1] | 146420-2000 | SHIM |
52/1. | [1] | 146420-2100 | SHIM |
52/1. | [1] | 146420-2200 | SHIM |
52/1. | [1] | 146420-2300 | SHIM |
52/1. | [1] | 146420-2400 | SHIM |
52/1. | [1] | 146420-2500 | SHIM |
52/1. | [1] | 146420-2600 | SHIM |
52/1. | [1] | 146420-2700 | SHIM |
52/1. | [1] | 146420-2800 | SHIM |
52/1. | [1] | 146420-2900 | SHIM |
52/1. | [1] | 146420-3000 | SHIM |
52/1. | [1] | 146420-3100 | SHIM |
52/1. | [1] | 146420-3200 | SHIM |
52/1. | [1] | 146420-3300 | SHIM |
52/1. | [1] | 146420-3400 | SHIM |
52/1. | [1] | 146420-3500 | SHIM |
52/1. | [1] | 146420-3600 | SHIM |
52/1. | [1] | 146420-3700 | SHIM |
52/1. | [1] | 146420-3800 | SHIM |
52/1. | [1] | 146420-3900 | SHIM |
52/1. | [1] | 146420-4000 | SHIM |
52/1. | [1] | 146420-4100 | SHIM |
52/1. | [1] | 146420-4200 | SHIM |
52/1. | [1] | 146420-4300 | SHIM |
52/1. | [1] | 146420-4400 | SHIM |
52/1. | [1] | 146420-4500 | SHIM |
52/1. | [1] | 146420-4600 | SHIM |
52/1. | [1] | 146420-4700 | SHIM |
52/1. | [1] | 146420-4800 | SHIM |
52/1. | [1] | 146420-4900 | SHIM |
52/1. | [1] | 146420-5000 | SHIM |
52/1. | [1] | 146420-5100 | SHIM |
52/1. | [1] | 146420-5200 | SHIM |
52/1. | [1] | 146420-5300 | SHIM |
52/1. | [1] | 146420-5400 | SHIM |
52/1. | [1] | 146420-5500 | SHIM |
52/1. | [1] | 146420-5600 | SHIM |
52/1. | [1] | 146420-5700 | SHIM |
52/1. | [1] | 146420-5800 | SHIM |
54. | [4] | 146433-0100 | GASKET |
55. | [4] | 146430-0320 | DELIVERY-VALVE ASSEMBLY 'VE4' VR30 |
56. | [4] | 146432-0000 | COMPRESSION SPRING K=0.48 |
58. | [4] | 146440-0220 | FITTING D0.45 L=50 |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146502-8120 | GOVERNOR COVER |
67/13. | [1] | 146621-1700 | UNION NUT |
67/14. | [1] | 146621-1800 | UNION NUT |
67/14. | [1] | 146621-1800 | UNION NUT |
67/15. | [1] | 146526-2800 | BLEEDER SCREW |
67/16. | [1] | 146526-2900 | BLEEDER SCREW |
67/27. | [1] | 146549-2820 | LEVER SHAFT |
67/76. | [1] | 146659-1600 | CLAMPING BAND |
67/77. | [1] | 139106-0300 | FLAT-HEAD SCREW |
68. | [1] | 146510-5320 | CONTROL SHAFT R=10 S R |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146534-6920 | CONTROL LEVER '469' |
72B. | [1] | 146534-7020 | CONTROL LEVER '470' |
73. | [1] | 014110-6440 | LOCKING WASHER |
74. | [1] | 013020-6040 | UNION NUT |
75. | [1] | 013020-6040 | UNION NUT |
76. | [1] | 014110-6440 | LOCKING WASHER |
77. | [1] | 146602-2100 | PLAIN WASHER |
78. | [1] | 146547-0520 | CONTROL LEVER |
79. | [1] | 146547-0720 | CONTROL LEVER |
80. | [1] | 146547-0420 | CONTROL LEVER |
81. | [1] | 146547-0320 | CONTROL LEVER |
82. | [1] | 146616-3300 | PLAIN WASHER |
83. | [1] | 146616-5000 | BUSHING |
84. | [2] | 146616-5100 | BUSHING |
84. | [2] | 146616-5100 | BUSHING |
85. | [2] | 146549-1900 | COILED SPRING |
85. | [2] | 146549-1900 | COILED SPRING |
86. | [1] | 146549-2120 | RACK |
87. | [1] | 139308-0300 | PLAIN WASHER |
88. | [1] | 146545-0300 | THREADED PIN |
88B. | [1] | 146545-0400 | THREADED PIN |
88C. | [1] | 146545-0500 | THREADED PIN |
90. | [1] | 139208-0100 | UNION NUT |
91. | [1] | 146600-1200 | O-RING |
92. | [1] | 146600-1000 | SEAL RING |
94. | [2] | 146616-5200 | BUSHING |
94. | [2] | 146616-5200 | BUSHING |
95. | [1] | 146551-2620 | FULCRUM LEVER I=2.2 |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET |
106. | [2] | 146588-0000 | COILED SPRING |
107. | [1] | 146569-0000 | UNION NUT |
108. | [1] | 146570-0420 | GOVERNOR SHAFT R-L/T |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM |
110/1. | [1] | 146571-0100 | SHIM |
110/1. | [1] | 146571-0200 | SHIM |
110/1. | [1] | 146571-0300 | SHIM |
110/1. | [1] | 146571-0400 | SHIM |
110/1. | [1] | 146571-0500 | SHIM |
110/1. | [1] | 146571-0600 | SHIM |
110/1. | [1] | 146571-0700 | SHIM |
110/1. | [1] | 146571-0800 | SHIM |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER |
115. | [1] | 146575-1000 | SLIDING SLEEVE '10' D0.5 1-0.5 |
116. | [1] | 146576-0000 | SEALING CAP |
117/1. | [1] | 146577-1800 | PLUG |
117/1. | [1] | 146577-1900 | PLUG |
117/1. | [1] | 146577-2000 | PLUG |
117/1. | [1] | 146577-2100 | PLUG |
117/1. | [1] | 146577-2200 | PLUG |
117/1. | [1] | 146577-2300 | PLUG |
117/1. | [1] | 146577-2400 | PLUG |
117/1. | [1] | 146577-2500 | PLUG |
117/1. | [1] | 146577-2600 | PLUG |
117/1. | [1] | 146577-2700 | PLUG |
117/1. | [1] | 146577-2800 | PLUG |
117/1. | [1] | 146577-2900 | PLUG |
117/1. | [1] | 146577-3000 | PLUG |
117/1. | [1] | 146577-3100 | PLUG |
117/1. | [1] | 146577-3200 | PLUG |
117/1. | [1] | 146577-3300 | PLUG |
117/1. | [1] | 146577-6700 | PLUG |
117/1. | [1] | 146577-6800 | PLUG |
117/1. | [1] | 146577-6900 | PLUG |
117/1. | [1] | 146577-7000 | PLUG |
117/1. | [1] | 146577-7100 | PLUG |
117/1. | [1] | 146577-7200 | PLUG |
117/1. | [1] | 146577-7300 | PLUG |
117/1. | [1] | 146577-7400 | PLUG |
117/1. | [1] | 146577-7500 | PLUG |
117/1. | [1] | 146577-7600 | PLUG |
117/1. | [1] | 146577-7700 | PLUG |
117/1. | [1] | 146577-7800 | PLUG |
117/1. | [1] | 146577-7900 | PLUG |
117/1. | [1] | 146577-8000 | PLUG |
117/1. | [1] | 146577-8100 | PLUG |
123. | [2] | 139106-0200 | FLAT-HEAD SCREW |
124. | [1] | 146620-1200 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-0020 | CAPSULE D14 |
130/2. | [1] | 026508-1140 | GASKET |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0920 | CONTROL VALVE '09'4XD1.6K=2.0 |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-0020 | OVER FLOW VALVE |
137. | [2] | 026512-1840 | GASKET |
138. | [1] | 146605-4020 | INLET UNION OUT B1 B2 |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 029470-4030 | WOODRUFF KEY |
220. | [1] | 146587-3800 | COILED SPRING |
221. | [1] | 146625-9720 | BRACKET |
222. | [2] | 010206-1840 | HEX-SOCKET-HEAD CAP SCREW |
235. | [1] | 146625-9000 | BRACKET |
236. | [2] | 139106-0500 | FLAT-HEAD SCREW |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
239. | [1] | 023500-5140 | PLAIN WASHER |
240. | [1] | 146650-0720 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-0720 | WIRE ' 7' 12V |
243. | [1] | 013020-5240 | UNION NUT |
245. | [2] | 026512-1840 | GASKET |
246. | [1] | 027412-2440 | EYE BOLT |
247. | [1] | 146605-0520 | INLET UNION IN B3 |
275. | [1] | 146612-3220 | BRACKET |
276. | [2] | 010010-1640 | BLEEDER SCREW |
280. | [1] | 146360-2920 | COVER |
281. | [1] | 146600-0800 | O-RING |
282. | [2] | 139106-1100 | FLAT-HEAD SCREW |
284. | [1] | 146549-3320 | RACK |
800S. | [1] | 146009-4620 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
804S. | [1] | 146232-0320 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-2420 | REPAIR SET |
903. | [1] | 146672-0220 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING |
906. | [1] | 146642-1600 | NUMBER PLATE |
924. | [1] | 146680-2220 | DAMPER |
924/2. | [2] | 139106-0300 | FLAT-HEAD SCREW |
924/3. | [1] | 146628-2100 | BRACKET |
924/4. | [1] | 139106-1100 | FLAT-HEAD SCREW |
924/5. | [1] | 139106-0300 | FLAT-HEAD SCREW |
924/6. | [1] | 146443-0100 | SPACER BUSHING |
924/7. | [1] | 139106-0100 | FLAT-HEAD SCREW |
924/8. | [1] | 146602-3600 | PLAIN WASHER |
Include in #2:
104748-0253
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Stopping the engine immediately after it has been working under load can result in overheating and accelerated wear of the engine components. Allow the engine to cool down before stopping. Avoiding hot engine shutdowns will maximize turbocharger shaft and bearing life.
Emergency Stopping
Emergency shutoff controls are for EMERGENCY use ONLY. DO NOT use Emergency shutoff devices or controls for normal stopping procedure.
Make sure that any external system components that have been operating to support engine operation are secured after any stop.Emergency Stop Buttons
Emergency Stop Button, shown mounted on a junction box.Emergency stops may be made by pushing the Emergency Stop Button located on the junction box (if equipped). Both the Button and the air inlet shutoff (if equipped) require resetting before the engine will start.Manual Stopping
A manual shutoff shaft is provided to override the governor control. The shaft will move the fuel control linkage to the FUEL OFF position. Refer to the Model Views for the engine location of the shaft. The engine may be stopped by using the shaft and the Woodward Actuator (if equipped) or the Mechanical Governor (if equipped).
Typical Woodward Actuator Control Lever.If equipped with a Woodward Actuator, move the control lever to the FUEL OFF position.
Typical Mechanical Governor ControlIf equipped with a Mechanical Governor Control, move the control to the FUEL OFF position.Hold the lever at the FUEL OFF position until the engine stops.Air Shutoff (If Equipped)
Some engines are equipped with an air shutoff, located between the aftercooler and the turbocharger. If equipped with an air shutoff lever, move the lever to the OFF position.Manual Stop Procedure
There may be several ways to shut off your engine. Make sure the shutoff procedures are understood. Use the following general guidelines for stopping the engine.1. Disengage any driven equipment or remove the load from engine.2. Allow the engine to run at rated speed for five minutes.3. Run the engine at 1/2 rated speed for two to three minutes.4. Reduce the engine speed to low idle for 30 seconds.Check the crankcase oil level during the engine idle. Read the LOW IDLE side of the dipstick. Maintain the oil level between the ADD and FULL marks.5. Shut the engine off by turning the start/stop switch to the stop or off position.After Stopping the Engine
* Check the crankcase oil level. Maintain the oil level between the ADD and FULL marks in the FULL RANGE zone on the dipstick.* Repair any leaks, perform minor adjustments, tighten loose bolts, etc.* Note the service hour meter reading. Perform periodic maintenance as instructed in the Maintenance Schedule.* Fill the fuel tank to prevent accumulation of moisture in the fuel. Do not overfill.
Only use antifreeze/coolant mixtures recommended in the Cooling System Specifications of this manual. Failure to do so can cause engine damage.
* Allow the radiator and engine jacket water system to cool. Check the coolant level. Maintain the cooling system to 13 mm (1/2 inch) from bottom of the fill pipe.If freezing temperatures are expected, check the coolant for proper antifreeze protection. The cooling system