104748-0030 ZEXEL INJECTION-PUMP ASSEMBLY Cross 1047480030 s23813800

Information injection-pump assembly

ZEXEL 104748-0030 1047480030

MAZDA S23813800 s23813800

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104748-0030 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104748-0030
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE	146633-7200
4.	_
5.	CAPSULE	146620-0120
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105141-2271
8.	Nozzle and Holder	SE08 13 640
9.	Open Pre:MPa(Kqf/cm2)	13.2{135}
10.	NOZZLE-HOLDER	105071-0591
11.	NOZZLE	105000-1850

Scheme ###:

1.	[1]	146000-1120	PUMP HOUSING
1/6.	[1]	146601-0000	PACKING RING
1/7.	[1]	029820-5020	BALL
6.	[1]	146100-0020	SUPPLY PUMP D17
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0000	DRIVE SHAFT
13.	[1]	146201-0000	WOODRUFF KEY
15.	[2]	146202-0001	DAMPER
16.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-0620	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0220	CAM PLATE '02'SK3074
30.	[1]	146600-0800	O-RING
31.	[1]	146300-1400	PUMP PLUNGER ' 14' 7-12.
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-0100	COMPRESSION SPRING K=2.25
35.	[1]	029998-0710	SHIM
35/1.	[0]	146603-0700	SHIM
35/1.	[0]	146603-0800	SHIM
35/1.	[0]	146603-0900	SHIM
35/1.	[0]	146603-1000	SHIM
35/1.	[0]	146603-1100	SHIM
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0000	COVER
38.	[2]	139106-0000	FLAT-HEAD SCREW
39.	[1]	146310-0100	COVER
40.	[2]	139106-0000	FLAT-HEAD SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0000	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48.	[2]	029998-0570	SHIM
48/1.	[2]	146603-0000	SHIM
48/1.	[2]	146603-0100	SHIM
48/1.	[2]	146603-0200	SHIM
48/1.	[2]	146603-0300	SHIM
48/1.	[2]	146603-0400	SHIM
48/1.	[2]	146603-0500	SHIM
48/1.	[2]	146603-0600	SHIM
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146400-3520	HYDRAULIC HEAD
50.	[1]	146400-3520	HYDRAULIC HEAD
50.	[1]	146400-3520	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52.	[1]	029998-0300	SHIM
52/1.	[1]	146420-0000	SHIM
52/1.	[1]	146420-0100	SHIM
52/1.	[1]	146420-0200	SHIM
52/1.	[1]	146420-0300	SHIM
52/1.	[1]	146420-0400	SHIM
52/1.	[1]	146420-0500	SHIM
52/1.	[1]	146420-0600	SHIM
52/1.	[1]	146420-0700	SHIM
52/1.	[1]	146420-0800	SHIM
52/1.	[1]	146420-0900	SHIM
52/1.	[1]	146420-1000	SHIM
52/1.	[1]	146420-1100	SHIM
52/1.	[1]	146420-1200	SHIM
52/1.	[1]	146420-1300	SHIM
52/1.	[1]	146420-1400	SHIM
52/1.	[1]	146420-1500	SHIM
52/1.	[1]	146420-1600	SHIM
52/1.	[1]	146420-1700	SHIM
52/1.	[1]	146420-1800	SHIM
52/1.	[1]	146420-1900	SHIM
52/1.	[1]	146420-2000	SHIM
52/1.	[1]	146420-2100	SHIM
52/1.	[1]	146420-2200	SHIM
52/1.	[1]	146420-2300	SHIM
52/1.	[1]	146420-2400	SHIM
52/1.	[1]	146420-2500	SHIM
52/1.	[1]	146420-2600	SHIM
52/1.	[1]	146420-2700	SHIM
52/1.	[1]	146420-2800	SHIM
52/1.	[1]	146420-2900	SHIM
52/1.	[1]	146420-3000	SHIM
52/1.	[1]	146420-3100	SHIM
52/1.	[1]	146420-3200	SHIM
52/1.	[1]	146420-3300	SHIM
52/1.	[1]	146420-3400	SHIM
52/1.	[1]	146420-3500	SHIM
52/1.	[1]	146420-3600	SHIM
52/1.	[1]	146420-3700	SHIM
52/1.	[1]	146420-3800	SHIM
52/1.	[1]	146420-3900	SHIM
52/1.	[1]	146420-4000	SHIM
52/1.	[1]	146420-4100	SHIM
52/1.	[1]	146420-4200	SHIM
52/1.	[1]	146420-4300	SHIM
52/1.	[1]	146420-4400	SHIM
52/1.	[1]	146420-4500	SHIM
52/1.	[1]	146420-4600	SHIM
52/1.	[1]	146420-4700	SHIM
52/1.	[1]	146420-4800	SHIM
52/1.	[1]	146420-4900	SHIM
52/1.	[1]	146420-5000	SHIM
52/1.	[1]	146420-5100	SHIM
52/1.	[1]	146420-5200	SHIM
52/1.	[1]	146420-5300	SHIM
52/1.	[1]	146420-5400	SHIM
52/1.	[1]	146420-5500	SHIM
52/1.	[1]	146420-5600	SHIM
52/1.	[1]	146420-5700	SHIM
52/1.	[1]	146420-5800	SHIM
54.	[4]	146433-0100	GASKET
55.	[4]	146430-1120	DELIVERY-VALVE ASSEMBLY 'VE12'VR352200L
56.	[4]	146432-0000	COMPRESSION SPRING K=0.48
58.	[4]	146440-0220	FITTING D0.45 L=50
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146502-2520	GOVERNOR COVER
67/1.	[1]	146505-5620	GOVERNOR COVER
67/14.	[1]	029240-6010	UNION NUT
67/16.	[1]	146526-0100	FLAT-HEAD SCREW
67/23.	[1]	146619-0320	BRACKET
67/26.	[1]	146619-0420	BRACKET
68.	[1]	146510-1920	CONTROL SHAFT R=10 S R
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146531-5700	CONTROL LEVER
72B.	[1]	146531-5800	CONTROL LEVER ' 1'
73.	[1]	014110-6440	LOCKING WASHER
75.	[1]	013020-6040	UNION NUT
82.	[1]	146526-2100	BLEEDER SCREW
83.	[1]	013020-6040	UNION NUT
87.	[1]	139308-0300	PLAIN WASHER
88.	[1]	146545-0300	THREADED PIN
88B.	[1]	146545-0400	THREADED PIN
88C.	[1]	146545-0500	THREADED PIN
90.	[1]	139208-0100	UNION NUT
91.	[1]	146600-1200	O-RING
92.	[1]	146600-1000	SEAL RING
95.	[1]	146551-1620	FULCRUM LEVER I=2.2
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET
106.	[2]	146588-0000	COILED SPRING
107.	[1]	146569-0000	UNION NUT
108.	[1]	146570-0420	GOVERNOR SHAFT R-L/T
109.	[1]	146600-0400	O-RING
110.	[1]	029998-4130	SHIM
110/1.	[1]	146571-0000	SHIM
110/1.	[1]	146571-0100	SHIM
110/1.	[1]	146571-0200	SHIM
110/1.	[1]	146571-0300	SHIM
110/1.	[1]	146571-0400	SHIM
110/1.	[1]	146571-0500	SHIM
110/1.	[1]	146571-0600	SHIM
110/1.	[1]	146571-0700	SHIM
110/1.	[1]	146571-0800	SHIM
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-0400	SLIDING SLEEVE '04' D2.0 2-0.5
116.	[1]	146576-0000	SEALING CAP
117.	[1]	029998-5510	PLUG SKH51
117/1.	[1]	146577-1800	PLUG
117/1.	[1]	146577-1900	PLUG
117/1.	[1]	146577-2000	PLUG
117/1.	[1]	146577-2100	PLUG
117/1.	[1]	146577-2200	PLUG
117/1.	[1]	146577-2300	PLUG
117/1.	[1]	146577-2400	PLUG
117/1.	[1]	146577-2500	PLUG
117/1.	[1]	146577-2600	PLUG
117/1.	[1]	146577-2700	PLUG
117/1.	[1]	146577-2800	PLUG
117/1.	[1]	146577-2900	PLUG
117/1.	[1]	146577-3000	PLUG
117/1.	[1]	146577-3100	PLUG
117/1.	[1]	146577-3200	PLUG
117/1.	[1]	146577-3300	PLUG
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE D14
130/2.	[1]	026508-1140	GASKET
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0920	CONTROL VALVE '09'4XD1.6K=2.0
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0020	OVER FLOW VALVE
137.	[2]	026512-1840	GASKET
137.	[2]	026512-1840	GASKET
138.	[1]	146609-1720	INLET UNION OUT B1 B2
139.	[1]	139907-0000	CAP
200.	[1]	146206-0100	COILED SPRING
220.	[1]	146587-3100	COILED SPRING
235.	[1]	146612-1500	BRACKET
236.	[2]	139106-0500	FLAT-HEAD SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
239.	[1]	023500-5140	PLAIN WASHER
240.	[1]	146650-0720	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-0720	WIRE ' 7' 12V
243.	[1]	013020-5240	UNION NUT
245.	[2]	026512-1840	GASKET
245.	[2]	026512-1840	GASKET
246.	[1]	027412-2440	EYE BOLT
247.	[1]	146609-1520	INLET UNION IN B3
280.	[1]	146360-1020	COVER
281.	[1]	146600-0800	O-RING
282.	[2]	139106-0400	FLAT-HEAD SCREW
800S.	[1]	146009-2620	PUMP HOUSING
800S/1.	[1]	146000-1120	PUMP HOUSING
800S/1/6.	[1]	146601-0000	PACKING RING
800S/1/6.	[1]	146601-0000	PACKING RING
800S/1/7.	[1]	029820-5020	BALL
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
903.	[1]	146620-0120	CAPSULE
903/1.	[1]	146620-0100	CAPSULE
903/2.	[1]	146600-1300	O-RING
906.	[1]	146633-7200	NUMBER PLATE

Include in #2:

104748-0030 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

104748-0030
104748-0033

S23813800 MAZDA

INJECTION-PUMP ASSEMBLY
S2 *

Information:

Lubricant Information
Certain abbreviations follow Society of Automotive Engineers (SAE) J754 nomenclature and some classifications follow SAE J183 abbreviations. SPC is a Caterpillar designation for special synthetic oils, that do not contain viscosity improvers. The MIL-L-46167A specification is U.S.A. Military Specifications.The definitions other than Caterpillar's will be of assistance in purchasing lubricants. Recommended oil viscosities can be found in the Lubricant Viscosities chart in the Maintenance Section.Grease is classified by the National Lubricating Grease Institute (NLGI) based on American Society of Testing & Materials (ASTM D217-68) Worked Penetration characteristics which are given a defined consistency number.Engine Lubricant Specification
Caterpillar has an oil formulation to provide maximum performance and life for your on-highway diesel truck engine. Cat Engine Oils are offered in appropriate viscosity grades to meet the performance and ambient temperature requirements for diesel truck engines.Caterpillar Oil
Caterpillar recommends the following specification to achieve the maximum engine life and performance with your on-highway diesel truck engine.* Caterpillar Engine Oil Cat Diesel Engine Oil-DEO (CF-4)Caterpillar Engine Oil-DEO (CF-4) Part Numbers
The DEO (CF-4) oil is blended in viscosity grades of SAE 10W30 and 15W40. Multi-grade oils lower oil consumption compared to single grades. This oil is also qualified as American Petroleum Institute (API) SG which allows its use in gasoline engine applications requiring this performance rating. Cat Engine Oil is currently offered by Caterpillar for continued refill use. Consult Caterpillar to obtain this oil.Commercial Oils
If oils other than Cat oils are to be used, the following oil specifications provide guidelines for the selection of commercial products.* All oils do not perform equally. Caterpillar recommends the use of API CF-4 performance oil, which has sufficient TBN for fuels with less than 0.5% sulfur. This section assumes a SUPERIOR QUALITY API CF-4 lube oil is used. A lower quality lube oil would require that the oil change intervals be reduced accordingly. * API specifications CF-4, CF-4/SF, or CF-4/SGIf API CF-4 oils are not available, the API CE, CE/SF, or CE/SG may be used with shortened oil change intervals as determined by close monitoring of oil condition with Scheduled Oil Sampling (S O S) and infrared analysis.
Failure to follow the commercial oil recommendation for API CF-4 performance oils can cause shortened engine life due to piston carbon deposits, liner bore polish and/or abnormally higher increasing oil consumption.
If API CF-4 or CE oils are NOT AVAILABLE, use local oils of proper viscosity ONLY if oil change interval is shortened to 5000 km (3,100 miles). The oil change interval must also be adjusted by using ROAD CONDITION FACTORS listed in the Maintenance Schedule.Additional Notes
The percentage of sulfur in the fuel will affect the engine oil and oil change interval recommendations. For fuel sulfur effects, the Infrared Analysis and the ASTM D2896 procedure can be used to evaluate the residual neutralization properties of an engine oil. The sulfur products formation depends on the fuel sulfur content, oil formulation, crankcase blowby, engine operating conditions and ambient temperature. Refer to Sulfur topic in the Fuel Specification section of this Manual for