Information injection-pump assembly
BOSCH
9 460 611 450
9460611450
ZEXEL
104746-6051
1047466051

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104746-6051 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104646-6041 |
3. | NUMBER PLATE | 146967-9000 |
4. | _ | 146672-1720 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105118-6272 |
8. | Nozzle and Holder | 8-97132-309-1 |
9. | Open Pre:MPa(Kqf/cm2) | 18.1{185} |
10. | NOZZLE-HOLDER | 105048-3230 |
11. | NOZZLE | 105017-2090 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0820 | DRIVE SHAFT |
12/1. | [1] | 146200-0800 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-1720 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0100 | SLOTTED WASHER |
29. | [1] | 146220-2020 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-2100 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-3400 | COMPRESSION SPRING |
34B. | [1] | 146302-3300 | COMPRESSION SPRING |
34C. | [1] | 146302-3500 | COMPRESSION SPRING |
35/1. | [0] | 146603-0700 | SHIM |
35/1. | [0] | 146603-0800 | SHIM |
35/1. | [0] | 146603-0900 | SHIM |
35/1. | [0] | 146603-1000 | SHIM |
35/1. | [0] | 146603-1100 | SHIM |
35/1. | [0] | 146603-3600 | SHIM |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0700 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-5100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [2] | 146603-0000 | SHIM |
48/1. | [2] | 146603-0100 | SHIM |
48/1. | [2] | 146603-0200 | SHIM |
48/1. | [2] | 146603-0300 | SHIM |
48/1. | [2] | 146603-0400 | SHIM |
48/1. | [2] | 146603-0500 | SHIM |
48/1. | [2] | 146603-0600 | SHIM |
48/1. | [2] | 146690-1400 | SHIM |
48/1. | [2] | 146690-1500 | SHIM |
48/1. | [2] | 146690-1600 | SHIM |
48/1. | [2] | 146690-1700 | SHIM |
48/1. | [2] | 146690-1800 | SHIM |
48/1. | [2] | 146690-1900 | SHIM |
48/1. | [2] | 146690-5800 | SHIM |
48/1. | [2] | 146690-5900 | SHIM |
48/1. | [2] | 146690-6000 | SHIM |
48/1. | [2] | 146690-6100 | SHIM |
48/1. | [2] | 146690-6200 | SHIM |
48/1. | [2] | 146690-6300 | SHIM |
48/1. | [2] | 146690-6400 | SHIM |
48/1. | [2] | 146690-6500 | SHIM |
48/1. | [2] | 146690-6600 | SHIM |
48/1. | [2] | 146690-6700 | SHIM |
48/1. | [2] | 146690-6800 | SHIM |
48/1. | [2] | 146690-6900 | SHIM |
48/1. | [2] | 146690-7000 | SHIM |
48/1. | [2] | 146690-7100 | SHIM |
48/1. | [2] | 146690-7200 | SHIM |
48/1. | [2] | 146690-7300 | SHIM |
48/1. | [2] | 146690-7400 | SHIM |
48/1. | [2] | 146690-7500 | SHIM |
48/1. | [2] | 146690-7800 | SHIM |
49. | [2] | 146234-0600 | GUIDE PIN |
50. | [1] | 146402-3820 | HYDRAULIC HEAD |
50. | [1] | 146402-3820 | HYDRAULIC HEAD |
50. | [1] | 146402-3820 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM |
52/1. | [1] | 146420-0100 | SHIM |
52/1. | [1] | 146420-0200 | SHIM |
52/1. | [1] | 146420-0300 | SHIM |
52/1. | [1] | 146420-0400 | SHIM |
52/1. | [1] | 146420-0500 | SHIM |
52/1. | [1] | 146420-0600 | SHIM |
52/1. | [1] | 146420-0700 | SHIM |
52/1. | [1] | 146420-0800 | SHIM |
52/1. | [1] | 146420-0900 | SHIM |
52/1. | [1] | 146420-1000 | SHIM |
52/1. | [1] | 146420-1100 | SHIM |
52/1. | [1] | 146420-1200 | SHIM |
52/1. | [1] | 146420-1300 | SHIM |
52/1. | [1] | 146420-1400 | SHIM |
52/1. | [1] | 146420-1500 | SHIM |
52/1. | [1] | 146420-1600 | SHIM |
52/1. | [1] | 146420-1700 | SHIM |
52/1. | [1] | 146420-1800 | SHIM |
52/1. | [1] | 146420-1900 | SHIM |
52/1. | [1] | 146420-2000 | SHIM |
52/1. | [1] | 146420-2100 | SHIM |
52/1. | [1] | 146420-2200 | SHIM |
52/1. | [1] | 146420-2300 | SHIM |
52/1. | [1] | 146420-2400 | SHIM |
52/1. | [1] | 146420-2500 | SHIM |
52/1. | [1] | 146420-2600 | SHIM |
52/1. | [1] | 146420-2700 | SHIM |
52/1. | [1] | 146420-2800 | SHIM |
52/1. | [1] | 146420-2900 | SHIM |
52/1. | [1] | 146420-3000 | SHIM |
52/1. | [1] | 146420-3100 | SHIM |
52/1. | [1] | 146420-3200 | SHIM |
52/1. | [1] | 146420-3300 | SHIM |
52/1. | [1] | 146420-3400 | SHIM |
52/1. | [1] | 146420-3500 | SHIM |
52/1. | [1] | 146420-3600 | SHIM |
52/1. | [1] | 146420-3700 | SHIM |
52/1. | [1] | 146420-3800 | SHIM |
52/1. | [1] | 146420-3900 | SHIM |
52/1. | [1] | 146420-4000 | SHIM |
52/1. | [1] | 146420-4100 | SHIM |
52/1. | [1] | 146420-4200 | SHIM |
52/1. | [1] | 146420-4300 | SHIM |
52/1. | [1] | 146420-4400 | SHIM |
52/1. | [1] | 146420-4500 | SHIM |
52/1. | [1] | 146420-4600 | SHIM |
52/1. | [1] | 146420-4700 | SHIM |
52/1. | [1] | 146420-4800 | SHIM |
52/1. | [1] | 146420-4900 | SHIM |
52/1. | [1] | 146420-5000 | SHIM |
52/1. | [1] | 146420-5100 | SHIM |
52/1. | [1] | 146420-5200 | SHIM |
52/1. | [1] | 146420-5300 | SHIM |
52/1. | [1] | 146420-5400 | SHIM |
52/1. | [1] | 146420-5500 | SHIM |
52/1. | [1] | 146420-5600 | SHIM |
52/1. | [1] | 146420-5700 | SHIM |
52/1. | [1] | 146420-5800 | SHIM |
54. | [4] | 146433-0100 | GASKET |
55. | [4] | 146430-1420 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0200 | COMPRESSION SPRING |
58. | [4] | 146440-1520 | FITTING |
60. | [4] | 139106-0100 | FLAT-HEAD SCREW |
67. | [1] | 146706-5221 | ANEROID CAPSULE |
67/1. | [1] | 146805-1921 | GOVERNOR COVER |
67/2. | [1] | 146515-2520 | CONTROL SHAFT |
67/3. | [1] | 146600-0100 | O-RING |
67/4. | [1] | 139310-0200 | PLAIN WASHER |
67/13. | [1] | 013020-6040 | UNION NUT |
67/14. | [1] | 146621-1700 | UNION NUT |
67/15. | [1] | 146526-2800 | BLEEDER SCREW |
67/16. | [1] | 146526-3000 | BLEEDER SCREW |
67/23. | [1] | 146628-9200 | BRACKET |
67/24. | [2] | 020306-2840 | BLEEDER SCREW |
67/25. | [2] | 013020-6040 | UNION NUT |
67/26. | [1] | 146932-2900 | BRACKET |
67/31. | [1] | 146710-0400 | BUSHING |
67/32. | [1] | 146602-1800 | PLAIN WASHER |
67/33. | [1] | 146716-0200 | UNION NUT |
67/34/1. | [1] | 146713-1000 | BEARING PIN |
67/34/1. | [1] | 146713-1100 | BEARING PIN |
67/34/1. | [1] | 146713-1200 | BEARING PIN |
67/34/1. | [1] | 146713-1300 | BEARING PIN |
67/34/1. | [1] | 146713-1400 | BEARING PIN |
67/35. | [1] | 146621-0300 | UNION NUT |
67/36. | [1] | 146600-1400 | O-RING |
67/37. | [1] | 146710-0100 | BUSHING |
67/38. | [1] | 139506-0200 | GASKET |
67/39. | [1] | 146620-0300 | CAPSULE |
67/40. | [1] | 026512-1540 | GASKET |
67/41. | [1] | 146713-3500 | ADJUSTING PIN |
67/47. | [1] | 146717-0200 | COILED SPRING |
67/49. | [1] | 146721-0700 | COVER |
67/54. | [4] | 139006-4400 | BLEEDER SCREW |
67/56. | [1] | 146723-0200 | CONTROL LEVER |
67/57. | [1] | 146712-0100 | BEARING PIN |
67/58. | [2] | 146620-0600 | CAPSULE |
67/59. | [2] | 026506-1040 | GASKET |
67/60. | [1] | 146724-0300 | ELEMENT |
67/61. | [1] | 146724-0400 | CAPSULE |
67/70. | [1] | 016520-6010 | O-RING |
67/71. | [1] | 146714-0100 | SLOTTED WASHER |
67/72. | [1] | 016010-0920 | LOCKING WASHER |
67/73. | [1] | 146715-0120 | BELLOWS |
67/74/1. | [0] | 146603-3700 | SHIM |
67/74/1. | [0] | 146603-3800 | SHIM |
67/74/1. | [0] | 146603-3900 | SHIM |
67/74/1. | [0] | 146603-4000 | SHIM |
67/74/1. | [0] | 146603-4100 | SHIM |
67/74/1. | [0] | 146603-4200 | SHIM |
67/78. | [1] | 146600-4400 | SEAL RING |
67/98. | [2] | 139006-4500 | BLEEDER SCREW |
67/100. | [1] | 146628-9000 | BRACKET |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3400 | THREADED PIN |
67/201B. | [1] | 146545-3500 | THREADED PIN |
67/201C. | [1] | 146545-3600 | THREADED PIN |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
72. | [1] | 146539-6100 | CONTROL LEVER |
72B. | [1] | 146539-6200 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT |
95. | [1] | 146865-0320 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM |
110/1. | [1] | 146571-0100 | SHIM |
110/1. | [1] | 146571-0200 | SHIM |
110/1. | [1] | 146571-0300 | SHIM |
110/1. | [1] | 146571-0400 | SHIM |
110/1. | [1] | 146571-0500 | SHIM |
110/1. | [1] | 146571-0600 | SHIM |
110/1. | [1] | 146571-0700 | SHIM |
110/1. | [1] | 146571-0800 | SHIM |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER |
115. | [1] | 146575-2000 | SLIDING SLEEVE |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG |
117/1. | [1] | 146577-1900 | PLUG |
117/1. | [1] | 146577-2000 | PLUG |
117/1. | [1] | 146577-2100 | PLUG |
117/1. | [1] | 146577-2200 | PLUG |
117/1. | [1] | 146577-2300 | PLUG |
117/1. | [1] | 146577-2400 | PLUG |
117/1. | [1] | 146577-2500 | PLUG |
117/1. | [1] | 146577-2600 | PLUG |
117/1. | [1] | 146577-2700 | PLUG |
117/1. | [1] | 146577-2800 | PLUG |
117/1. | [1] | 146577-2900 | PLUG |
117/1. | [1] | 146577-3000 | PLUG |
117/1. | [1] | 146577-3100 | PLUG |
117/1. | [1] | 146577-3200 | PLUG |
117/1. | [1] | 146577-3300 | PLUG |
117/1. | [1] | 146577-6700 | PLUG |
117/1. | [1] | 146577-6800 | PLUG |
117/1. | [1] | 146577-6900 | PLUG |
117/1. | [1] | 146577-7000 | PLUG |
117/1. | [1] | 146577-7100 | PLUG |
117/1. | [1] | 146577-7200 | PLUG |
117/1. | [1] | 146577-7300 | PLUG |
117/1. | [1] | 146577-7400 | PLUG |
117/1. | [1] | 146577-7500 | PLUG |
117/1. | [1] | 146577-7600 | PLUG |
117/1. | [1] | 146577-7700 | PLUG |
117/1. | [1] | 146577-7800 | PLUG |
117/1. | [1] | 146577-7900 | PLUG |
117/1. | [1] | 146577-8000 | PLUG |
117/1. | [1] | 146577-8100 | PLUG |
117/1. | [1] | 146877-0000 | PLUG |
117/1. | [1] | 146877-0100 | PLUG |
117/1. | [1] | 146877-0200 | PLUG |
117/1. | [1] | 146877-0300 | PLUG |
117/1. | [1] | 146877-4700 | PLUG |
117/1. | [1] | 146877-4800 | PLUG |
117/1. | [1] | 146877-4900 | PLUG |
117/1. | [1] | 146877-5000 | PLUG |
120. | [1] | 146579-2920 | RETAINING PIN |
122. | [1] | 146580-3300 | GOVERNOR SPRING |
123. | [4] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-0320 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET |
130/3. | [1] | 146422-0300 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0720 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146650-3720 | PULLING ELECTROMAGNET |
137. | [2] | 139514-0200 | GASKET |
145. | [1] | 146621-1000 | UNION NUT |
147. | [1] | 146600-5000 | O-RING |
160. | [1] | 146625-8020 | PLATE |
205. | [1] | 025804-1610 | WOODRUFF KEY |
206. | [1] | 013121-4140 | UNION NUT |
207. | [1] | 029321-4050 | LOCKING WASHER |
217. | [1] | 146541-2900 | SLOTTED WASHER |
218. | [1] | 146592-4300 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146592-4400 | COILED SPRING |
233. | [1] | 146658-8920 | WIRE |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-7320 | WIRE |
243. | [1] | 146621-1000 | UNION NUT |
245. | [3] | 139512-0500 | GASKET |
246. | [1] | 146125-0000 | EYE BOLT |
248. | [1] | 146614-0200 | SPACER BUSHING |
260. | [1] | 146611-0720 | BRACKET |
261. | [2] | 146621-4700 | UNION NUT |
264. | [1] | 016500-5010 | O-RING |
270. | [1] | 146615-2021 | TOOTHED GEAR |
270/1. | [1] | 146615-2000 | TOOTHED GEAR |
270/2. | [1] | 146615-0201 | COUPLING PLATE |
270/3. | [6] | 020006-1870 | BLEEDER SCREW |
800S. | [1] | 146009-6320 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0720 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
812S. | [1] | 146600-2220 | PARTS SET |
821S. | [1] | 146210-5720 | ROLLER SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP |
836S/1. | [1] | 146598-0700 | CAP |
836S/1. | [1] | 146598-0800 | CAP |
836S/1. | [1] | 146598-0900 | CAP |
903. | [1] | 146672-1720 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING |
906. | [1] | 146967-9000 | NAMEPLATE |
Include in #2:
104746-6051
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Filters and Pump Housing
1. Open the bleed valve on the pump housing. 2. Unscrew the hand priming pump plunger until it can be pulled out by hand. 3. Move the plunger in and out until fuel flows, free of air bubbles, from the bleed valve. 4. Close the bleed valve. 5. Push the plunger in and tighten by hand.6. Start the engine and check for leaks.Injection Pumps and Lines
The injection pumps and high pressure lines must be primed if the engine will not start, or runs rough, after priming the filters and pump housing.Each injection pump has a reverse flow check valve. These cannot be opened with hand priming pump pressure. Use the following procedure to prime the injection pumps and lines.
The fuel injection nozzles can be permanently damaged by twisting if only one wrench is used to loosen or tighten the fuel line nuts. Use one wrench to hold the nozzle and another to loosen the nut.
1. Loosen each of the fuel line nuts at the cylinder head end.2. Crank the engine with the starting motor until fuel flows, free of air bubbles, from each of the injection lines. Stop cranking the engine.3. Tighten each of the fuel line nuts to a torque of 41 + 7 N m (30 + 5 lb. ft.). Use a second wrench on the nozzle to prevent damage to it.4. Start the engine and check for leaks.
1. Open the bleed valve on the pump housing. 2. Unscrew the hand priming pump plunger until it can be pulled out by hand. 3. Move the plunger in and out until fuel flows, free of air bubbles, from the bleed valve. 4. Close the bleed valve. 5. Push the plunger in and tighten by hand.6. Start the engine and check for leaks.Injection Pumps and Lines
The injection pumps and high pressure lines must be primed if the engine will not start, or runs rough, after priming the filters and pump housing.Each injection pump has a reverse flow check valve. These cannot be opened with hand priming pump pressure. Use the following procedure to prime the injection pumps and lines.
The fuel injection nozzles can be permanently damaged by twisting if only one wrench is used to loosen or tighten the fuel line nuts. Use one wrench to hold the nozzle and another to loosen the nut.
1. Loosen each of the fuel line nuts at the cylinder head end.2. Crank the engine with the starting motor until fuel flows, free of air bubbles, from each of the injection lines. Stop cranking the engine.3. Tighten each of the fuel line nuts to a torque of 41 + 7 N m (30 + 5 lb. ft.). Use a second wrench on the nozzle to prevent damage to it.4. Start the engine and check for leaks.