104745-8811 ZEXEL 9 460 613 248 BOSCH INJECTION-PUMP ASSEMBLY 9460613248 1047458811 md362557


 

Information injection-pump assembly

BOSCH 9 460 613 248 9460613248
ZEXEL 104745-8811 1047458811
MITSUBISHI MD362557 md362557
104745-8811 INJECTION-PUMP ASSEMBLY
Rating:
26
Buy INJECTION-PUMP ASSEMBLY 104745-8811 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
104745-8811 
9 460 613 248 
MD362557  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4D56 K 11CJ INJECTION PUMP ASSY VE4 VE




Information:

Recommended Procedure
1. Tachometer Error ... To check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is bad, make repairs as necessary or install a new tachometer.2. Engine Operated at High Altitude ... Less oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 7500 ft. (2280 m) above sea level of operation.3. Brakes Do Not Completely Release ... Check the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand.4. Vehicle Operated in Too High a Gear ... If the operator does not shift the truck correctly, or operates the truck in a "lug" condition (using the truck in too high a gear for engine rpm to go up as acclerator pedal is pushed farther down, or using the truck in a gear where engine rpm goes down with accelerator pedal at maximum travel), poor vehicle performance is the result.5. Extra Engine Driven Equipment ... Air compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine.6. Speedometer Error ... A bad speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem.7. Speeds Too High ... The need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds.8. Overload on Vehicle ... Application personnel can give you the horsepower needs for different vehicles.9. High Moving Resistance ... Soft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer.10. High Wind Resistance ... The horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and/or boats

Have questions with 104745-8811?





Group cross 104745-8811 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 614 551 
ME202935 
INJECTION-PUMP ASSEMBLY
4M40 NA
 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

104745-8811  
9 460 613 248 
MD362557 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 249 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 613 875 
MD361634 
INJECTION-PUMP ASSEMBLY
4D56
9 460 614 552 
MD361639 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 305 
MD363340 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 305 
ME994983 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 306 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 613 306 
MD363341 
INJECTION-PUMP ASSEMBLY
F 01G 09W 0FC 
MD363341 
INJECTION-PUMP ASSEMBLY
4D56
F 01G 09W 0FC 
ME994984 
INJECTION-PUMP ASSEMBLY
4D56
9 460 611 621 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 613 844 
MD358170 
INJECTION-PUMP ASSEMBLY
4D56
9 460 611 622 
MD358171 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 448 
MD364504 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 374 
MD368057 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 374 
ME994985 
INJECTION-PUMP ASSEMBLY
4D56
Back to top