Fuel injectors
  1. Home
  2. injection
  3. #1047454130

104745-4130 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047454130 1670045n00


 

Information injection-pump assembly

ZEXEL 104745-4130 1047454130
NISSAN 1670045N00 1670045n00
104745-4130 INJECTION-PUMP ASSEMBLY
Rating:
12
Buy INJECTION-PUMP ASSEMBLY 104745-4130 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

ZEXEL 104745-4130 1047454130
NISSAN 1670045N00 1670045n00


Zexel num
Bosch num
Firm num
Name
104745-4130 
104745-4131 
 
1670045N00  NISSAN
INJECTION-PUMP ASSEMBLY
TD27 * K
104745-4130 
104745-4131 
 
1670045N00  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD27 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T OFF.   OFF
Injection timing adjustment
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   56.6 56.1 57.1
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   52.3 49.8 54.8
Oil temperature degC   50 48 52
Injection timing adjustment_03
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   56.6 55.6 57.6
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   2150 2150 2150
Average injection quantity mm3/st.   48.8 46.3 51.3
Oil temperature degC   52 50 54
Injection quantity adjustment
Pump speed r/min   2400 2400 2400
Average injection quantity mm3/st.   31 29 33
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   2700 2700 2700
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2400 2400 2400
Average injection quantity mm3/st.   31 28 34
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_04
Pump speed r/min   2500 2500 2500
Average injection quantity mm3/st.   19.6 15.1 24.1
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   7.8 5.8 9.8
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   7.8 5.3 10.3
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 50 85
Basic   *
Oil temperature degC   48 46 50
Remarks
Full  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   65 50 85
Oil temperature degC   48 46 50
Remarks
Full  
Speed control lever angle
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   1100 1100 1100
Overflow quantity with S/T ON cm3/min   460 330 590
Oil temperature degC   50 48 52
_02
Pump speed r/min   1100 1100 1100
Overflow quantity with S/T ON cm3/min   560 430 690
Oil temperature degC   50 48 52
Remarks
Without S/T O-ring; S/T ON.  
Stop lever angle
Pump speed r/min   1100 1100 1100
Pressure with S/T ON kPa   588 549 627
Pressure with S/T ON kgf/cm2   6 5.6 6.4
Pressure with S/T OFF kPa   490 461 519
Pressure with S/T OFF kgf/cm2   5 4.7 5.3
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   1100 1100 1100
Pressure with S/T OFF kPa   490 451 529
Pressure with S/T OFF kgf/cm2   5 4.6 5.4
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1700 1700 1700
Pressure with S/T OFF kPa   637 598 676
Pressure with S/T OFF kgf/cm2   6.5 6.1 6.9
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1100 1100 1100
Timer stroke with S/T ON mm   7.8 7.4 8.2
Timer stroke with S/T OFF mm   5.9 5.7 6.1
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   700 700 700
Timer stroke with S/T OFF mm   3.3 3.3 3.3
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Timer stroke with S/T ON mm   7.8 7.3 8.3
Timer stroke with S/T OFF mm   5.9 5.6 6.2
Basic   *
Oil temperature degC   50 48 52
_04
Pump speed r/min   1700 1700 1700
Timer stroke with S/T OFF mm   8.8 8.3 9.3
Oil temperature degC   50 48 52
_05
Pump speed r/min   2000 2000 2000
Timer stroke with S/T OFF mm   9.8 9.3 10.2
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   40 39.5 40.5
Timer stroke TA mm   4.6 4.4 4.8
Timer stroke variation dT mm   1.3 1.3 1.3
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF  
_02
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   40 39 41
Timer stroke TA mm   4.6 4.3 4.9
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF  
_03
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   30 27.5 32.5
Timer stroke TA mm   3.4 2.9 3.9
Oil temperature degC   50 48 52
Remarks
OFF  
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   6.36 6.26 6.46
MS dimension mm   1 0.9 1.1
Control lever angle alpha deg.   25 23 27
Control lever angle beta deg.   36 31 41

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104745-4130
N = pump speed Q = injection quantity V = output voltage C/L: control lever position I = idle F = full speed A = adjusting point B = confirmation point Vi = applied voltage
----------
Vi=10(V)
----------
V1=1.6+-0.03(V) V2=(10(V)) Vi=10(V)




Information:


REM07-31
Reman
October 2007PRODUCT LINE ADDITION: REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND MARINE ENGINE APPLICATIONS AnnouncementThe Caterpillar Remanufactured Products Group announces the expansion of the remanufactured injector product line to include coverage for various C7, C9, and 3306 industrial, machine, and marine applications. CoverageThe introduction of these injectors provides dealers with an additional, lower cost repair option for various C7, C9, and 3306 engine applications. Refer to the tables below for model usage. Features and BenefitsCat? Remanufactured injectors offer excellent value to customers. Customers who want fast repair turn-around, superior quality and reliability, and lower repair costs will benefit from the use of these Remanufactured injectors by providing immediate, off-the-shelf availability at a fraction of the new price. Core Acceptance Core Acceptance Crietira for Catperillar Remanufactured injectors is simple. Full core credit is issued when the core is fully assembled, there is no excessive rust or non-operational damage and it is an acceptable part number. Consult your Core Acceptance Guide for complete details.WarrantyPlease consult the appropriate warranty statement for your area.
PELJ0827 CATERPILLAR? ?2007 Caterpillar

Have questions with 104745-4130?





Group cross 104745-4130 ZEXEL

Nissan 

104745-4130  

104745-4131 
 
1670045N00 
INJECTION-PUMP ASSEMBLY
TD27

Nissan-Diesel 

104745-4130  

104745-4131 
 
1670045N00 
INJECTION-PUMP ASSEMBLY
TD27
104745-4131  

104745-4132 
 
1670045N01 
INJECTION-PUMP ASSEMBLY
TD27
104745-4132  
9 460 612 997 
1670045N02 
INJECTION-PUMP ASSEMBLY
TD27
104745-4133  
 
 
INJECTION-PUMP ASSEMBLY
Back to top