Fuel injectors
  1. Home
  2. injection
  3. #1047452051

104745-2051 ZEXEL 9 460 614 509 BOSCH INJECTION-PUMP ASSEMBLY 9460614509 1047452051 16700g2404


 

Information injection-pump assembly

BOSCH 9 460 614 509 9460614509
ZEXEL 104745-2051 1047452051
NITCO(MISA) 16700G2404 16700g2404
104745-2051 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 104745-2051 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104745-2051
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE 146981-2100
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1261
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 9.8(100)
10. NOZZLE-HOLDER 105078-0050
11. NOZZLE 105007-1210

Scheme ###:

PACKING RING
1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0420 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-2320 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2520 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-8520 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-3000 COMPRESSION SPRING
34B. [1] 146312-2900 COMPRESSION SPRING
34C. [1] 146312-1800 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-3300 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
49. [2] 146234-0600 GUIDE PIN
50. [1] 146403-4120 HYDRAULIC HEAD
50. [1] 146403-4120 HYDRAULIC HEAD
50. [1] 146403-4120 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
54. [4] 146433-0100 GASKET
55. [4] 146430-6520 DELIVERY-VALVE ASSEMBLY VE65
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-2720 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
67. [1] 146701-6620 MANIFOLD-PRESSURE COMP.
67/1. [1] 146805-3720 GOVERNOR COVER
67/2. [1] 146515-0220 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [1] 139310-0200 PLAIN WASHER
67/5. [1] 146832-2820 CONTROL LEVER
67/5B. [1] 146832-2920 CONTROL LEVER
67/5C. [1] 146832-3020 CONTROL LEVER
67/5D. [1] 146832-3120 CONTROL LEVER
67/6. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/7. [1] 146621-0700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-3000 BLEEDER SCREW
67/18. [1] 146592-6000 COILED SPRING
67/19. [1] 146541-3000 BUSHING
67/21. [1] 146592-6100 COILED SPRING
67/22. [1] 146541-3100 SLOTTED WASHER
67/31. [1] 146710-0800 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-1700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-1400 BUSHING
67/38. [1] 139506-0200 GASKET
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET
67/41. [1] 146713-4100 ADJUSTING PIN
67/42. [2] 146714-0000 PLATE
67/43. [1] 146715-0000 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-3400 COILED SPRING
67/48/1. [1] 146720-0000 SPACER BUSHING L3.7
67/48/1. [1] 146720-0100 SPACER BUSHING L3.9
67/48/1. [1] 146720-0200 SPACER BUSHING L4.1
67/48/1. [1] 146720-0300 SPACER BUSHING L4.3
67/48/1. [1] 146720-0400 SPACER BUSHING L4.5
67/48/1. [1] 146720-0500 SPACER BUSHING L4.7
67/48/1. [1] 146720-1800 SPACER BUSHING L3.6
67/48/1. [1] 146720-1900 SPACER BUSHING L3.8
67/48/1. [1] 146720-2000 SPACER BUSHING L4.0
67/48/1. [1] 146720-2100 SPACER BUSHING L4.2
67/48/1. [1] 146720-2200 SPACER BUSHING L4.4
67/48/1. [1] 146720-2300 SPACER BUSHING L4.6
67/48/1. [1] 146720-2400 SPACER BUSHING L4.8
67/49. [1] 146721-3220 COVER
67/54. [2] 139006-4600 BLEEDER SCREW
67/55. [2] 139006-4500 BLEEDER SCREW
67/56. [1] 146723-0300 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/64. [1] 146927-2300 BRACKET
67/78. [1] 146600-4400 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
95. [1] 146851-2420 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0420 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146975-9900 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
120. [1] 146579-2020 RETAINING PIN
122. [1] 146580-3800 GOVERNOR SPRING
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0920 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-5520 PULLING ELECTROMAGNET STAMP 55
137. [2] 139514-0200 GASKET
145. [1] 146621-1000 UNION NUT
147. [1] 146600-5000 O-RING
200. [1] 146206-0100 COILED SPRING
221. [1] 146927-2620 BRACKET
222. [2] 139006-4600 BLEEDER SCREW
224. [1] 146927-2700 BRACKET
230. [1] 146933-3820 BRACKET STAMP 33-38
231. [1] 139006-4600 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146688-0120 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 407911-1402 CONTROL UNIT
243. [1] 146621-4901 UNION NUT
244. [1] 020118-1440 BLEEDER SCREW
245. [2] 139512-0500 GASKET
246. [1] 027412-2440 EYE BOLT
247. [1] 146666-9120 PIPE
247. [1] 146666-9120 PIPE
251. [1] 014010-8140 PLAIN WASHER
309. [1] 020146-1270 BLEEDER SCREW
310. [1] 146685-5720 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146620-1500 FLAT-HEAD SCREW
310/4. [1] 013020-6040 UNION NUT
310/5. [1] 146614-2300 JOINT CONNECTION
310/6. [1] 146661-0401 BOOT
351. [1] 146125-0101 FILTER
352. [1] 146125-0200 COILED SPRING
355. [1] 146933-0100 BRACKET
356. [1] 139006-4700 BLEEDER SCREW
357. [1] 146927-6920 PLATE
360. [1] 146663-1700 BUSHING
361. [1] 146649-8900 CAP
362. [2] 146620-8403 BLEEDER SCREW
800S. [1] 146018-0420 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
812S. [1] 146600-1920 PARTS SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
847S. [1] 146685-5710 POTENTCIOMETER
906. [1] 146981-2100 NAMEPLATE

Include in #2:

104745-2051 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104745-2051 
9 460 614 509 
16700G2404  NITCO(MISA)
INJECTION-PUMP ASSEMBLY
TD27-T K




Information:


AFFECTED PRODUCT
Model Identification Number
994K MM900301-00322
MRK00201-00204, 312-333
SMX00201-00209
PARTS NEEDED
Qty
Part Number Description
2 4538963 INJECTOR AS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
The existing standard grease injectors will need to be replaced with new 453-8963 XL Injector Assemblies for the both left-hand and right-hand K-pins. Refer to Image1.
Refer to the attached Rework Procedure.
Image1
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-15000 hrs,
0-36 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 1.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Refer to the following Rework Procedure in order to install two new 453-8963 XL Injector Assemblies.
Refer to Image1.1.1 for the location of the injector bank.
1. Remove cover (A). Refer to Image1.1.2.
Image1.1.1
Image1.1.2
2. Remove existing injectors (C). Refer to Image1.2.1.
Image1.2.1
3. In order to remove the existing injector, loosen lower bolt (D) from the injector bank until half of the injector is free. Refer to Image1.3.1.
4. Remove the existing grease zerks, grease zerk caps, and adapters and reinstall on the new 453-8963 XL Injector Assemblies.
Image1.3.1
5. Install new 453-8963 XL Injector Assemblies (1).
6. Purge 453-8963 XL Injector Assemblies (1) with grease.
7. Adjust to full output (20 turns).
8. Reinstall cover (A).
Image1.4.1

Have questions with 104745-2051?





Group cross 104745-2051 ZEXEL

Nissan 

104745-2000  
9 460 612 408 
1670098N61 
INJECTION-PUMP ASSEMBLY
CD20-T
104745-2010  
9 460 613 164 
1670095N61 
INJECTION-PUMP ASSEMBLY
CD20-T
104745-2020  
9 460 612 409 
1670088N02 
INJECTION-PUMP ASSEMBLY
CD20-T

Nitco(Misa) 

104745-2030  
9 460 613 296 
16700G2403 
INJECTION-PUMP ASSEMBLY
TD27-T
104745-2040  
9 460 613 446 
16700G2460 
INJECTION-PUMP ASSEMBLY
TD27-T

Nissan 

104745-2050  

104745-2051 
9 460 613 485 
16700G2404 
INJECTION-PUMP ASSEMBLY

Nitco(Misa) 

104745-2051  
9 460 614 509 
16700G2404 
INJECTION-PUMP ASSEMBLY
TD27-T
Back to top