104741-7112 ZEXEL 9 460 613 946 BOSCH INJECTION-PUMP ASSEMBLY 9460613946 1047417112

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 460 613 946 9460613946

ZEXEL 104741-7112 1047417112

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-7112 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104741-7112
1.	_
2.	FUEL INJECTION PUMP	104641-7112
3.	NUMBER PLATE	146983-2200
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-6670
8.	Nozzle and Holder	6204-11-3300
9.	Open Pre:MPa(Kqf/cm2)	19.6{200}
10.	NOZZLE-HOLDER	105048-3300
11.	NOZZLE	105017-2580

Scheme ###:

1/6.	[1]	146601-1100	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0320	DRIVE SHAFT
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-1720	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-3420	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-0000	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM D17.5&7.5T0.60
34.	[1]	146302-4200	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0700	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-5100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0500	GUIDE PIN
50.	[1]	146402-0820	HYDRAULIC HEAD
50.	[1]	146402-0820	HYDRAULIC HEAD
50.	[1]	146402-0820	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET D12&6.4T1.00
55.	[4]	146430-7520	DELIVERY-VALVE ASSEMBLY
56.	[4]	146432-0200	COMPRESSION SPRING
58.	[4]	146440-0720	FITTING
60.	[4]	139106-0100	FLAT-HEAD SCREW
67.	[1]	146821-9720	GOVERNOR COVER
67/1.	[1]	146508-1022	GOVERNOR COVER
67/2.	[1]	146515-0220	CONTROL SHAFT
67/3.	[1]	146600-0100	O-RING
67/4.	[2]	139310-0200	PLAIN WASHER
67/4.	[2]	139310-0200	PLAIN WASHER
67/5.	[1]	146530-0000	CONTROL LEVER
67/5B.	[1]	146530-0100	CONTROL LEVER
67/5C.	[1]	146832-1500	CONTROL LEVER
67/5D.	[1]	146832-1600	CONTROL LEVER
67/6.	[2]	014110-6440	LOCKING WASHER
67/6.	[2]	014110-6440	LOCKING WASHER
67/7.	[1]	013020-6040	UNION NUT M6P1H5
67/8.	[1]	146515-1820	LEVER SHAFT
67/9.	[1]	146587-4600	COILED SPRING
67/10.	[1]	146600-0200	O-RING
67/11.	[1]	146602-0100	PLAIN WASHER D14&10.1T1.50
67/12.	[1]	146540-1300	CONTROL LEVER
67/12B.	[1]	146540-1400	CONTROL LEVER
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-2800	BLEEDER SCREW
67/16.	[1]	146526-2800	BLEEDER SCREW
67/18.	[1]	146587-2000	COILED SPRING
67/19.	[1]	146541-0000	ANGLE PIECE
67/25.	[2]	013020-6040	UNION NUT M6P1H5
67/25.	[2]	013020-6040	UNION NUT M6P1H5
67/26.	[1]	139006-4800	BLEEDER SCREW
67/78.	[1]	146600-4400	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-4600	THREADED PIN
67/201B.	[1]	146545-4700	THREADED PIN
67/201C.	[1]	146545-4800	THREADED PIN
67/202.	[1]	146598-5000	UNION NUT
67/203.	[1]	146600-1200	O-RING
67/204.	[1]	146545-4500	DAMPER
95.	[1]	146871-4720	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER D20&8.4T1.40
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-2600	PLAIN WASHER D34&13T1.0
115.	[1]	146976-0700	SLIDING SLEEVE
116.	[1]	146576-0400	CAP
117/1.	[1]	146877-0820	PLUG
117/1.	[1]	146877-0920	PLUG
117/1.	[1]	146877-1020	PLUG
117/1.	[1]	146877-1120	PLUG
117/1.	[1]	146877-1220	PLUG
117/1.	[1]	146877-1320	PLUG
117/1.	[1]	146877-1420	PLUG
117/1.	[1]	146877-1520	PLUG
117/1.	[1]	146877-1620	PLUG
117/1.	[1]	146877-1720	PLUG
117/1.	[1]	146877-1820	PLUG
117/1.	[1]	146877-1920	PLUG
117/1.	[1]	146877-2020	PLUG
117/1.	[1]	146877-2120	PLUG
117/1.	[1]	146877-2220	PLUG
117/1.	[1]	146877-2320	PLUG
117/1.	[1]	146877-2420	PLUG
117/1.	[1]	146877-2520	PLUG
117/1.	[1]	146877-2620	PLUG
117/1.	[1]	146877-2720	PLUG
117/1.	[1]	146877-2820	PLUG
117/1.	[1]	146877-2920	PLUG
117/1.	[1]	146877-3020	PLUG
117/1.	[1]	146877-3120	PLUG
117/1.	[1]	146877-3220	PLUG
117/1.	[1]	146877-3320	PLUG
117/1.	[1]	146877-3420	PLUG
117/1.	[1]	146877-3520	PLUG
117/1.	[1]	146877-3620	PLUG
117/1.	[1]	146877-3720	PLUG
117/1.	[1]	146877-3820	PLUG
117/1.	[1]	146877-3920	PLUG
117/1.	[1]	146877-4020	PLUG
117/1.	[1]	146877-4120	PLUG
117/1.	[1]	146877-4220	PLUG
120.	[1]	146879-3120	RETAINING PIN
122.	[1]	146580-1400	GOVERNOR SPRING
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-1720	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1
130/3.	[1]	146422-1001	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0120	OVER FLOW VALVE
137.	[2]	029341-2140	GASKET
200.	[1]	146206-0100	COILED SPRING
205.	[1]	029470-4030	WOODRUFF KEY
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146662-1420	WIRE
243.	[1]	146621-1000	UNION NUT
245.	[3]	029341-2140	GASKET
246.	[1]	146125-0020	EYE BOLT
248.	[1]	146614-0200	SPACER BUSHING
343.	[1]	146598-8320	CAP
800S.	[1]	146018-9720	PUMP HOUSING
800S/1/6.	[1]	146601-1100	PACKING RING
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
821S.	[1]	146210-5720	ROLLER SET
825S.	[1]	146598-8120	CAP
835S.	[1]	146598-7320	CAP
837S.	[1]	146598-7310	CAP
906.	[1]	146983-2200	NAMEPLATE

Include in #2:

104741-7112 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 613 946 9460613946

ZEXEL 104741-7112 1047417112

Zexel num

Bosch num

Firm num

Name

104741-7112
104741-7113

9 460 613 946

INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 72.7 72.2 73.2

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 45.4 41.4 49.4

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 70.7 66.7 74.7

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 72.7 71.7 73.7

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1300 1300 1300

Average injection quantity mm3/st. 68 65.5 70.5

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 1425 1425 1425

Average injection quantity mm3/st. 13.5 9.5 17.5

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Injection quantity adjustment_02

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 3

Oil temperature degC 50 48 52

Injection quantity adjustment_03

Pump speed r/min 1425 1425 1425

Average injection quantity mm3/st. 13.5 9 18

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Governor adjustment

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 11.1 9.1 13.1

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 11.1 8.6 13.6

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 86.5 81.5 91.5

Basic *

Oil temperature degC 48 46 50

Remarks
IDLE

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 86.5 81.5 91.5

Oil temperature degC 48 46 50

Remarks
IDLE

Speed control lever angle

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1300 1300 1300

Overflow quantity cm3/min 380 250 510

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1300 1300 1300

Pressure kPa 471 451 491

Pressure kgf/cm2 4.8 4.6 5

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1300 1300 1300

Pressure kPa 471 442 500

Pressure kgf/cm2 4.8 4.5 5.1

Basic *

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1300 1300 1300

Timer stroke mm 1.6 1.4 1.8

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1100 1100 1100

Timer stroke mm 0.5 0 1

Oil temperature degC 50 48 52

_03

Pump speed r/min 1300 1300 1300

Timer stroke mm 1.6 1.3 1.9

Basic *

Oil temperature degC 50 48 52

_04

Pump speed r/min 1425 1425 1425

Timer stroke mm 3.3 2.6 3.8

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 2.8 2.7 2.9

KF dimension mm 5 4.9 5.1

MS dimension mm 1.7 1.6 1.8

Pre-stroke mm 0.45 0.43 0.47

Control lever angle alpha deg. 16 12 20

Control lever angle beta deg. 32 27 37

Test data Ex:

0000001801 STOP LEVER ADJUSTMENT

Adjustment of the stop lever (1)Adjust the starting injection quantity adjusting bolt (B) so that the starting injection quantity is as specified. (2)Fix using the lock nut. (A) = starting injection quantity adjusting nut (C) = starting injection quantity adjusting lever (D) = adjusting position L:
----------

----------
L=7~13mm T=6~9Nm{0.6~0.9kgfm}

Information:

Use of the Pickup During Wet Conditions
If the pickup becomes wet, it may operate intermittently or not at all. Although the pickup is water resistant, it is not waterproof. Water spray from rain or other sources may cause the pickup to stop producing an output signal.If this happens, the pickup should be removed from the engine and allowed to dry out thoroughly. If necessary, the pickup can be dried in an oven at approximately 50°C (122°F). After drying, the pickup should operate correctly.If it is not possible to keep the pickup dry, use the following procedure: If the pickup must be used during wet conditions, it may be possible to protect it from moisture by using a water displacing spray such as WD-40®.Remove the pickup from the engine. Thoroughly spray the pickup from all directions. Make sure the pickup is completely covered with the spray. Reinstall the pickup on the engine and check its operation.When water first contacts the pickup, the unit may stop working temporarily, but will start working again after the water has been displaced by the solution. If necessary, spray the solution on the pickup after installation on the injection line.Permanent Installation on the Engine
If the pickup is to be permanently installed on the engine, install the pickup on the fuel injection line in the usual manner. Make sure that the thumbscrew is hand tightened securely, but not over tightened. Run the engine and check the operation of the pickup.Make sure that the pickup and line are clean and dry. If the pickup is working correctly, use a can of spray paint to thoroughly paint the pickup from all directions. Several coats should be applied. Let the paint dry thoroughly before operating the engine.Checking the Operation of the Amplifier and Pickup
(1) 6V2100 Multitach. (2) 5P9698 Calibrator. (3) 5P7366 Power Cable. (4) Digital Multimeter. (5) Screwdriver. (6) 6V6152 Adapter. Screwdriver (5) should have a blade approximately 150 mm (6 in) long with 6 mm (.25 in) diameter shaft of round bare metal (not anodized or insulated).The 6V6152 Adapter (6) is a phono plug-to-BNC connector. Modifications must be made to the 5P9698 Calibrator (2). Refer to Special Instruction, SMHS7504-01.Checking the 4C6812 Amplifier
(1) 6V6152 Adapter Plug. (2) 5P9698 Calibrator. (3) 4C6812 Amplifier. (4) Connector. (5) 5P7366 Power Cable. (6) Knob. (7) Battery Indicator. (8) No Input Signal Light.1. Install 6V6152 Adapter Plug (1) on the end of the output cable on 5P9698 Calibrator (2). Plug the adapter into 4C6812 Amplifier (3).2. Check the operation of the multitach being used by performing the CHECKING PHOTO OPERATION test procedure contained in Special Instruction SEHS7807. (This is to ensure it is operating correctly on PHOTO operation.)3. Plug connector (4), on the end of the amplifier output cable, into the PH (photo) connector on the multitach. Attach 5P7366 Power Cable (5) to the multitach and to a suitable power source. Refer to SEHS7807.4. Program the multitach for .5 P/REV and to read R/MIN on the PH (photo) input. Turn knob (6) on