Information injection-pump assembly
ZEXEL
104741-6570
1047416570
ISUZU
8943784110
8943784110

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104741-6570 |
1. | _ | |
2. | FUEL INJECTION PUMP | |
3. | NUMBER PLATE | 146918-3800 |
4. | _ | 146672-1720 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105118-4541 |
8. | Nozzle and Holder | 8-94471-808-0 |
9. | Open Pre:MPa(Kqf/cm2) | 18.1{185} |
10. | NOZZLE-HOLDER | 105048-3230 |
11. | NOZZLE | 105017-0420 |
Scheme ###:
1/6. | [1] | 146601-0100 | PACKING RING |
6. | [1] | 146100-0520 | SUPPLY PUMP D20 SNT |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12/1. | [1] | 146200-1200 | DRIVE SHAFT 4JF1 |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0001 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0100 | PLAIN WASHER PARK. |
20. | [1] | 146210-3020 | ROLLER SET 4JF1 18210 |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0200 | SLOTTED WASHER PARK. |
29. | [1] | 146220-1620 | CAM PLATE '16'SK3196 |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-0100 | PUMP PLUNGER ' 1' 5-5. |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-3700 | COMPRESSION SPRING K=3.1 |
34B. | [1] | 146302-3600 | COMPRESSION SPRING K=2.8 |
35/1. | [1] | 146603-0700 | SHIM |
35/1. | [1] | 146603-0800 | SHIM |
35/1. | [1] | 146603-0900 | SHIM |
35/1. | [1] | 146603-1000 | SHIM |
35/1. | [1] | 146603-1100 | SHIM |
35/1. | [1] | 146603-3600 | SHIM |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0700 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0300 | PLAIN WASHER |
45. | [1] | 146231-0000 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM |
48/1. | [1] | 146603-0100 | SHIM |
48/1. | [1] | 146603-0200 | SHIM |
48/1. | [1] | 146603-0300 | SHIM |
48/1. | [1] | 146603-0400 | SHIM |
48/1. | [1] | 146603-0500 | SHIM |
48/1. | [1] | 146603-0600 | SHIM |
48/1. | [1] | 146690-1400 | SHIM |
48/1. | [1] | 146690-1500 | SHIM |
48/1. | [1] | 146690-1600 | SHIM |
48/1. | [1] | 146690-1700 | SHIM |
48/1. | [1] | 146690-1800 | SHIM |
48/1. | [1] | 146690-1900 | SHIM |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146402-2820 | HYDRAULIC HEAD D11 2X4.0 A0 |
50. | [1] | 146402-2820 | HYDRAULIC HEAD D11 2X4.0 A0 |
50. | [1] | 146402-2820 | HYDRAULIC HEAD D11 2X4.0 A0 |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM |
52/1. | [1] | 146420-0100 | SHIM |
52/1. | [1] | 146420-0200 | SHIM |
52/1. | [1] | 146420-0300 | SHIM |
52/1. | [1] | 146420-0400 | SHIM |
52/1. | [1] | 146420-0500 | SHIM |
52/1. | [1] | 146420-0600 | SHIM |
52/1. | [1] | 146420-0700 | SHIM |
52/1. | [1] | 146420-0800 | SHIM |
52/1. | [1] | 146420-0900 | SHIM |
52/1. | [1] | 146420-1000 | SHIM |
52/1. | [1] | 146420-1100 | SHIM |
52/1. | [1] | 146420-1200 | SHIM |
52/1. | [1] | 146420-1300 | SHIM |
52/1. | [1] | 146420-1400 | SHIM |
52/1. | [1] | 146420-1500 | SHIM |
52/1. | [1] | 146420-1600 | SHIM |
52/1. | [1] | 146420-1700 | SHIM |
52/1. | [1] | 146420-1800 | SHIM |
52/1. | [1] | 146420-1900 | SHIM |
52/1. | [1] | 146420-2000 | SHIM |
52/1. | [1] | 146420-2100 | SHIM |
52/1. | [1] | 146420-2200 | SHIM |
52/1. | [1] | 146420-2300 | SHIM |
52/1. | [1] | 146420-2400 | SHIM |
52/1. | [1] | 146420-2500 | SHIM |
52/1. | [1] | 146420-2600 | SHIM |
52/1. | [1] | 146420-2700 | SHIM |
52/1. | [1] | 146420-2800 | SHIM |
52/1. | [1] | 146420-2900 | SHIM |
52/1. | [1] | 146420-3000 | SHIM |
52/1. | [1] | 146420-3100 | SHIM |
52/1. | [1] | 146420-3200 | SHIM |
52/1. | [1] | 146420-3300 | SHIM |
52/1. | [1] | 146420-3400 | SHIM |
52/1. | [1] | 146420-3500 | SHIM |
52/1. | [1] | 146420-3600 | SHIM |
52/1. | [1] | 146420-3700 | SHIM |
52/1. | [1] | 146420-3800 | SHIM |
52/1. | [1] | 146420-3900 | SHIM |
52/1. | [1] | 146420-4000 | SHIM |
52/1. | [1] | 146420-4100 | SHIM |
52/1. | [1] | 146420-4200 | SHIM |
52/1. | [1] | 146420-4300 | SHIM |
52/1. | [1] | 146420-4400 | SHIM |
52/1. | [1] | 146420-4500 | SHIM |
52/1. | [1] | 146420-4600 | SHIM |
52/1. | [1] | 146420-4700 | SHIM |
52/1. | [1] | 146420-4800 | SHIM |
52/1. | [1] | 146420-4900 | SHIM |
52/1. | [1] | 146420-5000 | SHIM |
52/1. | [1] | 146420-5100 | SHIM |
52/1. | [1] | 146420-5200 | SHIM |
52/1. | [1] | 146420-5300 | SHIM |
52/1. | [1] | 146420-5400 | SHIM |
52/1. | [1] | 146420-5500 | SHIM |
52/1. | [1] | 146420-5600 | SHIM |
52/1. | [1] | 146420-5700 | SHIM |
52/1. | [1] | 146420-5800 | SHIM |
54. | [4] | 146433-0100 | GASKET |
55. | [4] | 146430-2920 | DELIVERY-VALVE ASSEMBLY 'VE29'VR303000 |
56. | [4] | 146432-0200 | COMPRESSION SPRING K=1.0 |
58. | [4] | 146440-0720 | FITTING '07'D0.45 L=50 |
60. | [4] | 139106-0100 | FLAT-HEAD SCREW |
67. | [1] | 146501-2521 | GOVERNOR COVER |
67/1. | [1] | 146508-1022 | GOVERNOR COVER |
67/2. | [1] | 146515-0320 | CONTROL SHAFT R15.5 |
67/3. | [1] | 146600-0100 | O-RING |
67/4. | [2] | 139310-0200 | PLAIN WASHER |
67/4. | [2] | 139310-0200 | PLAIN WASHER |
67/5. | [1] | 146530-0000 | CONTROL LEVER '000' |
67/5B. | [1] | 146530-0100 | CONTROL LEVER '001' |
67/6. | [2] | 014110-6440 | LOCKING WASHER |
67/6. | [2] | 014110-6440 | LOCKING WASHER |
67/7. | [1] | 013020-6040 | UNION NUT |
67/8. | [1] | 146515-1820 | LEVER SHAFT |
67/9. | [1] | 146587-4500 | COILED SPRING |
67/10. | [1] | 146600-0200 | O-RING |
67/11. | [1] | 146602-0100 | PLAIN WASHER |
67/12. | [1] | 146540-1300 | CONTROL LEVER |
67/12B. | [1] | 146540-1400 | CONTROL LEVER ' 0' |
67/13. | [1] | 146621-1700 | UNION NUT |
67/14. | [1] | 146621-1700 | UNION NUT |
67/15. | [1] | 146526-2800 | BLEEDER SCREW |
67/16. | [1] | 146526-2800 | BLEEDER SCREW |
67/18. | [1] | 146587-2000 | COILED SPRING |
67/19. | [1] | 146541-0000 | ANGLE PIECE |
67/23. | [1] | 146925-2520 | BRACKET |
67/24. | [2] | 139006-4500 | BLEEDER SCREW |
67/25. | [1] | 013020-6040 | UNION NUT |
67/26. | [1] | 146925-2920 | BRACKET |
67/78. | [1] | 146600-1000 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3720 | THREADED PIN |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
95. | [1] | 146561-4720 | FULCRUM LEVER I=1.9 SKH5 |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT R |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM |
110/1. | [1] | 146571-0100 | SHIM |
110/1. | [1] | 146571-0200 | SHIM |
110/1. | [1] | 146571-0300 | SHIM |
110/1. | [1] | 146571-0400 | SHIM |
110/1. | [1] | 146571-0500 | SHIM |
110/1. | [1] | 146571-0600 | SHIM |
110/1. | [1] | 146571-0700 | SHIM |
110/1. | [1] | 146571-0800 | SHIM |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-2600 | PLAIN WASHER |
115. | [1] | 146575-2000 | SLIDING SLEEVE '20' D0.5G |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG |
117/1. | [1] | 146577-1900 | PLUG |
117/1. | [1] | 146577-2000 | PLUG |
117/1. | [1] | 146577-2100 | PLUG |
117/1. | [1] | 146577-2200 | PLUG |
117/1. | [1] | 146577-2300 | PLUG |
117/1. | [1] | 146577-2400 | PLUG |
117/1. | [1] | 146577-2500 | PLUG |
117/1. | [1] | 146577-2600 | PLUG |
117/1. | [1] | 146577-2700 | PLUG |
117/1. | [1] | 146577-2800 | PLUG |
117/1. | [1] | 146577-2900 | PLUG |
117/1. | [1] | 146577-3000 | PLUG |
117/1. | [1] | 146577-3100 | PLUG |
117/1. | [1] | 146577-3200 | PLUG |
117/1. | [1] | 146577-3300 | PLUG |
117/1. | [1] | 146577-6700 | PLUG |
117/1. | [1] | 146577-6800 | PLUG |
117/1. | [1] | 146577-6900 | PLUG |
117/1. | [1] | 146577-7000 | PLUG |
117/1. | [1] | 146577-7100 | PLUG |
117/1. | [1] | 146577-7200 | PLUG |
117/1. | [1] | 146577-7300 | PLUG |
117/1. | [1] | 146577-7400 | PLUG |
117/1. | [1] | 146577-7500 | PLUG |
117/1. | [1] | 146577-7600 | PLUG |
117/1. | [1] | 146577-7700 | PLUG |
117/1. | [1] | 146577-7800 | PLUG |
117/1. | [1] | 146577-7900 | PLUG |
117/1. | [1] | 146577-8000 | PLUG |
117/1. | [1] | 146577-8100 | PLUG |
117/1. | [1] | 146877-0000 | PLUG |
117/1. | [1] | 146877-0100 | PLUG |
117/1. | [1] | 146877-0200 | PLUG |
117/1. | [1] | 146877-0300 | PLUG |
120. | [1] | 146579-8720 | RETAINING PIN |
122. | [1] | 146580-0600 | GOVERNOR SPRING K=0.185 |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0320 | CAPSULE D14 DI |
130/2. | [1] | 026508-1140 | GASKET |
130/3. | [1] | 146422-0300 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0620 | CONTROL VALVE '06'2XD1.6K=2. |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-0120 | OVER FLOW VALVE |
137. | [2] | 026512-1840 | GASKET |
138. | [1] | 146607-7520 | INLET UNION OUT B2 B2 |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 025804-1610 | WOODRUFF KEY |
206. | [1] | 013121-4140 | UNION NUT |
207. | [1] | 029321-4050 | LOCKING WASHER |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-7320 | WIRE ' 73' 12V |
243. | [1] | 146621-1000 | UNION NUT |
245. | [3] | 026512-1840 | GASKET |
246. | [1] | 146125-0020 | EYE BOLT |
247. | [1] | 146607-7620 | INLET UNION IN B3 |
248. | [1] | 146614-0200 | SPACER BUSHING |
260. | [1] | 146611-1420 | BRACKET |
261. | [2] | 146621-0900 | UNION NUT |
264. | [1] | 016500-5010 | O-RING |
270. | [1] | 146615-2120 | TOOTHED GEAR |
270/3. | [6] | 020006-1870 | BLEEDER SCREW |
270/4. | [1] | 146629-6200 | TIMING PLATE |
270/5. | [1] | 010038-1040 | BLEEDER SCREW |
800S. | [1] | 146009-9420 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
800S/1/6. | [1] | 146601-0100 | PACKING RING |
804S. | [1] | 146232-0320 | COMPRESSION SPRING |
805S. | [1] | 146574-0320 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
835S. | [1] | 146598-1000 | CAP LOAD |
836S/1. | [1] | 146598-0600 | CAP SPEED L=18 |
836S/1. | [1] | 146598-0700 | CAP SPEED L=21 |
836S/1. | [1] | 146598-0800 | CAP SPEED L=24 |
836S/1. | [1] | 146598-0900 | CAP SPEED L=27 |
903. | [1] | 146672-1720 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING |
906. | [1] | 146918-3800 | NAMEPLATE |
Include in #2:
104741-6570
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
Information:
Typical Example1. Remove bolts (1) from the alternator bracket.2. Remove the bolts that hold plate (3) and remove the plate.3. Disconnect water line (2) from the air compressor. Turn the water line tee toward the lifting bracket in order to provide clearance to remove the head bolt. 4. Remove bolts (4) and (5) that hold the cylinder head assembly to the cylinder block.5. Fasten a hoist and remove the cylinder head assembly. The weight is approximately 135 kg (300 lb).
Do not put the cylinder head assembly down on a flat surface. This can cause damage to the fuel injection valves.
6. Remove the gasket and seals from the spacer plate.Install Cylinder Head Assembly
Be sure a new gasket has been installed between the spacer plate and the cylinder block. See topic, "Remove & Install Spacer Plate". 1. Thoroughly clean the spacer plate and the bottom surface of the cylinder head assembly. Install a new head gasket, new seals (1) and two O-ring seals (2). 2. Fasten a hoist and put the cylinder head assembly (3) in position on the cylinder block.3. Tighten the bolts in sequence shown in Illustration D11970.
(1) Large bolts (3/4 inch). Put 6V4876 Molycoat Paste Lubricant on bolt threads and between washers and underside of bolt heads.(2) Small bolts (3/8 inch). See Step 4h.4. Install the cylinder head bolts and washers. Tighten the bolts in sequence shown.a. Tighten bolts 1 through 14 in number sequence to 270 25 N m (200 20 lb ft).b. Tighten bolts 1 through 14 in number sequence to 470 20 N m (345 15 lb ft).c. Tighten bolts 1 through 14 in number sequence again to 470 20 N m (345 15 lb ft).d. Install the rocker arm shafts for the engine valves and the remaining (3/4 in) bolts and/or compression brake studs.e. Tighten bolts 15 through 26 in number sequence to 270 25 N m (200 20 lb ft).f. Tighten bolts 15 through 26 in number sequence to 450 20 N m (330 15 lb ft).g. Tighten bolts 15 through 26 in number sequence again to 450 20 N m (330 15 lb ft).h. Tighten the thirteen small bolts (2) to 45 7 N m (33 5 lb ft).5. Make an adjustment to the valves to have a clearance of 0.38 mm (.015 in) for intake and 0.76 mm (.030 in) for exhaust. Tighten the locknuts for the valve adjustment screws to a torque of 28 4 N m (21 3 lb ft).6. Install the valve cover bases and the inner fuel lines. See topic, "Install Rocker Shaft Assemblies & Push Rods".7. Install the valve covers. See topic, "Install Valve Covers".
Typical Example8. Install plate (4).9. Connect the water line to the air compressor.10. Install bolts (5) for the alternator bracket.End By:a. install exhaust manifoldb. install fuel injection linesc. install aftercooler housingd. install water temperature regulatore. install rocker shaft assemblies and push rods