104741-5270 ZEXEL 9 460 614 446 BOSCH INJECTION-PUMP ASSEMBLY 9460614446 1047415270 8970283260

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 460 614 446 9460614446

ZEXEL 104741-5270 1047415270

ISUZU 8970283260 8970283260

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-5270 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

BOSCH 9 460 614 446 9460614446

ZEXEL 104741-5270 1047415270

ISUZU 8970283260 8970283260

Zexel num

Bosch num

Firm num

Name

104741-5270

9 460 614 446

8970283260 ISUZU

INJECTION-PUMP ASSEMBLY
4JB1CGT * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Pump speed r/min 1250 1250 1250

Boost pressure kPa 46.7 45.4 48

Boost pressure mmHg 350 340 360

Average injection quantity mm3/st. 49.1 48.6 50.6

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_02

Pump speed r/min 1250 1250 1250

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Average injection quantity mm3/st. 60.9 60.4 61.4

Difference in delivery mm3/st. 3.5

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_03

Pump speed r/min 600 600 600

Boost pressure kPa 13.3 12 14.6

Boost pressure mmHg 100 90 110

Average injection quantity mm3/st. 35.8 31.8 39.8

Oil temperature degC 48 46 50

Injection timing adjustment_04

Pump speed r/min 750 750 750

Boost pressure kPa 24 22.7 25.3

Boost pressure mmHg 180 170 190

Average injection quantity mm3/st. 38.2 38.2 38.2

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 900 900 900

Boost pressure kPa 46.7 45.4 48

Boost pressure mmHg 350 340 360

Average injection quantity mm3/st. 48.2 48.2 48.2

Oil temperature degC 50 48 52

Injection timing adjustment_06

Pump speed r/min 1250 1250 1250

Boost pressure kPa 46.7 45.4 48

Boost pressure mmHg 350 340 360

Average injection quantity mm3/st. 49.1 48.1 50.1

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_07

Pump speed r/min 1250 1250 1250

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Average injection quantity mm3/st. 60.9 59.9 61.9

Difference in delivery mm3/st. 3.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_08

Pump speed r/min 1800 1800 1800

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Average injection quantity mm3/st. 58.3 54.8 61.8

Difference in delivery mm3/st. 5.5

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2300 2300 2300

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Average injection quantity mm3/st. 16.5 13.5 19.5

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2600 2600 2600

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Average injection quantity mm3/st. 5

Oil temperature degC 55 52 58

Injection quantity adjustment_03

Pump speed r/min 2300 2300 2300

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Average injection quantity mm3/st. 16.5 13.5 19.5

Difference in delivery mm3/st. 4.5

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 7 5 9

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 7 5 9

Difference in delivery mm3/st. 2

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 80 60 100

Basic *

Oil temperature degC 48 46 50

Remarks
IDLE

Timer adjustment_02

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 80 60 100

Oil temperature degC 48 46 50

Speed control lever angle

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1600 1600 1600

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Oil temperature degC 50 48 52

Remarks
MEASURE

Stop lever angle

Pump speed r/min 1600 1600 1600

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Pressure with S/T OFF kPa 490 470 510

Pressure with S/T OFF kgf/cm2 5 4.8 5.2

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1050 1050 1050

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Pressure with S/T OFF kPa 314 285 343

Pressure with S/T OFF kgf/cm2 3.2 2.9 3.5

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1600 1600 1600

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Pressure with S/T OFF kPa 490 470 510

Pressure with S/T OFF kgf/cm2 5 4.8 5.2

Basic *

Oil temperature degC 50 48 52

Stop lever angle_04

Pump speed r/min 1800 1800 1800

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Pressure with S/T OFF kPa 539 510 568

Pressure with S/T OFF kgf/cm2 5.5 5.2 5.8

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1600 1600 1600

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Timer stroke with S/T OFF mm 5 4.8 5.2

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 520 520 520

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Timer stroke with S/T ON mm 0.5 0.5

Oil temperature degC 50 48 52

_03

Pump speed r/min 1050 1050 1050

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Timer stroke with S/T OFF mm 0.5 0.1 0.9

Oil temperature degC 50 48 52

_04

Pump speed r/min 1600 1600 1600

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Timer stroke with S/T OFF mm 5 4.8 5.2

Basic *

Oil temperature degC 50 48 52

_05

Pump speed r/min 1800 1800 1800

Boost pressure kPa 93.3 92 94.6

Boost pressure mmHg 700 690 710

Timer stroke with S/T OFF mm 6.2 5.9 6.6

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 2.8 2.7 2.9

KF dimension mm 5.5 5.4 5.6

MS dimension mm 0.9 0.8 1

BCS stroke mm 4.8 4.6 5

Pre-stroke mm 0.45 0.43 0.47

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 37 32 42

Test data Ex:

0000001801 MICROSWITCH ADJUSTMENT

1. Fix dummy bolt (C) at N1 and Q1. 2. Move the microswitch in the direction of the arrow and fix it where it turns OFF. 3. Remove the dummy bolt (C) after the completion of adjustment. Confirm that the microswitch turns ON at the idle lever position and OFF at the full lever position. (A): injection quantity standard (P): Boost pressure (N): Speed of the pump (Q): Injection quantity (B): Microswitch fixing bolt
----------
N1=1000r/min Q1=27.9+-1cm3/1,000st
----------
P1=93.3kPa P2=700mmHg N1=1000r/min Q1=27.9+-1cm3/1,000st T=2~3N-m{0.2~0.3kgf-m}

0000001901 V-FICD ADJUSTMENT

Adjustment of the V-FICD 1. Adjust the actuator rod to obtain S1. 2. Apply negative pressure P1 kPa {P2 mmHg} to the actuator and confirm that it moves through its full stroke. (A) Control lever (Idling position)
----------
S1=1+1mm P1=-53.3kPa P2=-400mmHg
----------
S1=1+1mm

Information:

Information Release Memo REM03-10
Reman
May 2003 REMANUFACTURED FUEL INJECTOR FOR VARIOUS 3500 GENSET, MACHINE AND MARINE APPLICATIONS Announcement The Caterpillar Remanufactured Products Group announces the expansion of the remanufactured injector product line to include coverage for various 3500 Genset, Machine and Marine applications. Coverage The addition of this Reman injector provides dealers with an additional repair option to support various 3500 Genset, Machine and Marine applications. Coverage is extensive so please consult your NPR or Reman Cross Reference for exact model coverage. Features And Benefits Cat? Remanufactured injectors offer excellent value to customers. Customers who want fast repair turn-around, superior quality and reliability, and lower repair costs will benefit from the use of these Remanufactured injectors. Cat Remanufactured injectors provide immediate, off-the-shelf availability at a fraction of the new price. Features
All critical engineering changes and updates included
Worldwide availability through Caterpillar? parts distribution system
Backed by Cat warranty Benefits
Improved reliability and performance
Customer access regardless of location
Consistent support Core Acceptance Core Acceptance Criteria for Caterpillar Remanufactured injectors is simple, visual, and requires no special tools. Full core credit is issued when the core is complete, fully assembled, and has an acceptable part number. Consult your Core Acceptance Guide for complete details. Warranty Please consult the appropriate warranty statement for your area. Core Management Please refer to the Caterpillar Core Management Information System (CMIS 2) Parts Information application describing all reman part/CAF and related information. Also refer to other CMIS 2 inquiry applications such as Customer Profiles, Inspection Reason Codes, Inspection Line Inquiry, Add Charge Information, Entitlement Activity, Entitlement Inquiry, CCR Inquiry, CCR Entry, Shipment Processing; Process Packaging Grief; and Reporting to properly manage core returns and monitor inspection performance. This information will be available to all dealers worldwide after your CMIS 2 conversion date. In the meantime, please continue to use the current CMIS Entitlement Parts Inquiry Screen describing the list of parts in a Core Acceptability Family (CAF) and related part number detail. For the latest updates of Reman Policies and Core Management (SELD0122), Core Management Systems & Operations Procedures (SELD0040), and Shipping Instructions (SELD0039), go to the Reman Dealer website https://reman.cat.com If you have any questions regarding core return processing, feel free to call Corinth toll free at (800) 537-2928. For assistance with technical questions, call the Peoria Reman Customer Satisfaction Hot Line also toll free at (888) 88-REMAN or use our E-mail address--Reman_Help.
PELJ0170 CATERPILLAR? ?2003 Caterpillar