104741-4970 ZEXEL F 01G 09W 0FF BOSCH INJECTION-PUMP ASSEMBLY f01g09w0ff 1047414970 16700na01c

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH F 01G 09W 0FF f01g09w0ff

ZEXEL 104741-4970 1047414970

NISSAN-DIESEL 16700NA01C 16700na01c

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-4970 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104741-4970
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

1/6.	[1]	146601-0900	PACKING RING
6.	[1]	146100-0420	SUPPLY PUMP
9.	[1]	146103-0100	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0020	DRIVE SHAFT
12/1.	[1]	146200-0000	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-2320	ROLLER SET
24.	[1]	146303-0100	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-4520	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146311-5420	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
34.	[1]	146312-5200	COMPRESSION SPRING
34B.	[1]	146312-6000	COMPRESSION SPRING
34C.	[1]	146312-6800	COMPRESSION SPRING
35/1.	[1]	146690-3200	SHIM D11.5&9.4T0.1
35/1.	[1]	146690-3300	SHIM D11.5&9.4T0.2
35/1.	[1]	146690-3400	SHIM D11.5&9.4T0.25
35/1.	[1]	146690-3500	SHIM D11.5&9.4T1.0
35/1.	[1]	146690-4100	SHIM D11.5&9.4T2
35/1.	[1]	146690-4200	SHIM D11.5&9.4T0.5
35/1.	[1]	146690-4300	SHIM D11.5&9.4T0.75
36.	[1]	146600-0800	O-RING
37.	[1]	146310-4020	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-5100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
41.	[1]	146312-5300	COMPRESSION SPRING
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
49.	[2]	146234-0600	GUIDE PIN
50.	[1]	146401-4220	HYDRAULIC HEAD
50.	[1]	146401-4220	HYDRAULIC HEAD
50.	[1]	146401-4220	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
54.	[4]	146433-0100	GASKET
55.	[4]	146430-0320	DELIVERY-VALVE ASSEMBLY VE4
56.	[4]	146432-0200	COMPRESSION SPRING
58.	[4]	146440-0720	FITTING
60.	[4]	139106-0100	FLAT-HEAD SCREW
67.	[1]	146822-0220	GOVERNOR COVER
67/1.	[1]	146805-2120	GOVERNOR COVER
67/2.	[1]	146515-0320	CONTROL SHAFT
67/3.	[1]	146600-0100	O-RING
67/4.	[2]	139310-0200	PLAIN WASHER
67/4.	[2]	139310-0200	PLAIN WASHER
67/5.	[1]	146530-0000	CONTROL LEVER
67/5B.	[1]	146530-0100	CONTROL LEVER STAMP 001
67/5C.	[1]	146832-1500	CONTROL LEVER
67/5D.	[1]	146832-1600	CONTROL LEVER
67/6.	[2]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/6.	[2]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/7.	[1]	013020-6040	UNION NUT
67/8.	[1]	146515-1820	LEVER SHAFT
67/9.	[1]	146592-0400	COILED SPRING
67/10.	[1]	146600-0200	O-RING
67/11.	[1]	146602-0100	PLAIN WASHER
67/12.	[1]	146540-4000	CONTROL LEVER
67/12B.	[1]	146540-4100	CONTROL LEVER
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-2800	BLEEDER SCREW
67/16.	[1]	146526-6400	BLEEDER SCREW
67/18.	[1]	146594-0600	COILED SPRING
67/19.	[1]	146541-0000	ANGLE PIECE
67/25.	[2]	013020-6040	UNION NUT
67/25.	[2]	013020-6040	UNION NUT
67/26.	[1]	139006-0200	BLEEDER SCREW
67/78.	[1]	146600-4400	SEAL RING
67/104.	[1]	146936-1100	BRACKET
67/105.	[1]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN L53.00
67/201B.	[1]	146545-3500	THREADED PIN L55.00
67/201C.	[1]	146545-3600	THREADED PIN L57.00
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
95.	[1]	146891-1820	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0420	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-2600	PLAIN WASHER
115.	[1]	146976-2900	SLIDING SLEEVE
116.	[1]	146576-0400	CAP
117/1.	[1]	146877-1020	PLUG L=5.2
117/1.	[1]	146877-1120	PLUG L=5.3
117/1.	[1]	146877-1220	PLUG L=5.4
117/1.	[1]	146877-1320	PLUG L=5.5
117/1.	[1]	146877-1420	PLUG L=5.6
117/1.	[1]	146877-1520	PLUG L=5.7
117/1.	[1]	146877-1620	PLUG L=5.8
117/1.	[1]	146877-1720	PLUG L=5.9
117/1.	[1]	146877-1820	PLUG L=6.0
117/1.	[1]	146877-1920	PLUG L=6.1
117/1.	[1]	146877-2020	PLUG L=6.2
117/1.	[1]	146877-2120	PLUG L=6.3
117/1.	[1]	146877-2220	PLUG L=6.4
117/1.	[1]	146877-2320	PLUG L=6.5
117/1.	[1]	146877-2420	PLUG L=6.6
117/1.	[1]	146877-2520	PLUG L=6.7
117/1.	[1]	146877-2620	PLUG L=6.8
120.	[1]	146579-2720	RETAINING PIN
122.	[1]	146580-4100	GOVERNOR SPRING
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1.0
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0520	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0120	OVER FLOW VALVE
200.	[1]	146206-0100	COILED SPRING
240.	[1]	146650-0720	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146662-8320	WIRE
243.	[1]	146621-4901	UNION NUT
246.	[1]	027412-2440	EYE BOLT
351.	[1]	146125-0101	FILTER
352.	[1]	146125-0200	COILED SPRING
800S.	[1]	146019-8820	PUMP HOUSING
800S/1/6.	[1]	146601-0900	PACKING RING
804S.	[1]	146232-1520	COMPRESSION SPRING
805S.	[1]	146574-0320	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
821S.	[1]	146210-5720	ROLLER SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
906.	[1]	146984-8100	NAMEPLATE
907.	[1]	025803-1640	WOODRUFF KEY

Include in #2:

104741-4970 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09W 0FF f01g09w0ff

ZEXEL 104741-4970 1047414970

NISSAN-DIESEL 16700NA01C 16700na01c

Zexel num

Bosch num

Firm num

Name

104741-4970
104741-4971

F 01G 09W 0FF

16700NA01C NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
QD32 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 40.7 40.2 41.2

Difference in delivery mm3/st. 3.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 39 39 39

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 37.8 33.8 41.8

Oil temperature degC 48 46 50

Injection timing adjustment_04

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 40.7 39.7 41.7

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 40.2 36.7 43.7

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 10 8 12

Difference in delivery mm3/st. 3

Basic *

Oil temperature degC 50 48 52

Injection quantity adjustment_02

Pump speed r/min 1525 1525 1525

Average injection quantity mm3/st. 5

Oil temperature degC 50 48 52

Injection quantity adjustment_03

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 10 6.5 13.5

Basic *

Oil temperature degC 50 48 52

Governor adjustment

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 8 6 10

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 8 5.5 10.5

Difference in delivery mm3/st. 2.5

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 56.9 51.9 61.9

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 56.9 51.9 61.9

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 900 900 900

Overflow quantity cm3/min 440 310 570

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 900 900 900

Pressure kPa 549 520 578

Pressure kgf/cm2 5.6 5.3 5.9

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 900 900 900

Pressure kPa 549 510 588

Pressure kgf/cm2 5.6 5.2 6

Basic *

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1150 1150 1150

Pressure kPa 628 589 667

Pressure kgf/cm2 6.4 6 6.8

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 900 900 900

Timer stroke mm 2.3 2.1 2.5

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 800 800 800

Timer stroke mm 1.8 1.3 2.3

Oil temperature degC 50 48 52

_03

Pump speed r/min 900 900 900

Timer stroke mm 2.3 2 2.6

Basic *

Oil temperature degC 50 48 52

_04

Pump speed r/min 1150 1150 1150

Timer stroke mm 3.7 3.2 4.2

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 24 23.5 24.5

Timer stroke TA mm 1.6 1.4 1.8

Timer stroke variation dT mm 0.7 0.7 0.7

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 24 23 25

Timer stroke TA mm 1.6 1.3 1.9

Timer stroke variation dT mm 0.7 0.7 0.7

Basic *

Oil temperature degC 50 48 52

_03

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 15 12.5 17.5

Timer stroke TA mm 0.9 0.4 1.4

Timer stroke variation dT mm 1.4 1.4 1.4

Oil temperature degC 50 48 52

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.62 5.52 5.72

MS dimension mm 1.8 1.7 1.9

Pre-stroke mm 0.1 0.08 0.12

Control lever angle alpha deg. 25 21 29

Control lever angle beta deg. 32 27 37

Test data Ex:

0000001801 STOP LEVER ADJUSTMENT

Adjustment of the stop lever Adjust adjusting bolt (B) so that the starting injection quantity is within the standard. Fix using nut. (A) Adjusting nut (C) Starting injection quantity adjusting lever
----------

----------
L=15.0~18.5mm

Information:

3406B and 3406C Non-Peec Engines
Steps 4 through 7 do not apply to PEEC engines.
Illustration 16. Install Lever Assembly
(1) 6N-3646 Lever. (2) 5P-0537 Washer. (3) 6V-8918 Bolt. (4) 9M-3858 Rack Preload Spring. (5) 1B-7182 Bolt.4. Install lever (1) with washer (2) and bolt (3).5. Install bolt (5) into hole as shown.6. Hook spring (4) between bolt (5) and lever (1).
Illustration 17. Install Rack Positioning Assembly
(1) 9U-5296 Rack Assembly. (2) Original cover mounting bolts or 4F-7957 Bolt.7. Install rack positioning assembly (1) with bolts (2). Use rack positioning assembly (1) as a "fuel ON" and "fuel OFF" control. Position the assembly to the full "fuel ON" position for all tests. Use the positioning assembly for rack adjustment.3406 Peec Engines
Steps 8 and 9 do not apply to Non-PEEC engines.
Illustration 18. Installing testing hardware for 3406 PEEC Engines
(1) 9U-5292 Rack Preload Assembly. (2) 9U-5120 Spanner Wrench. (3) 9U-5295 Positioning Assembly.8. Remove the BTM from the injection pump and install the 9U-5292 Rack Preload Assembly (1). Make sure the pin is properly located in the slot of the servo shaft. After installing the rack preload assembly, finger tighten the bolts.9. Remove the shut-off solenoid with a 9U-5120 Spanner Wrench (2) and install 9U-5295 Positioning Assembly (3). Use rack preload assembly (1) as a "fuel ON" and "fuel OFF" control. Position the assembly to the full "fuel ON" position for all tests. Use the positioning assembly for rack adjustment.Connect Hoses and Lines
Illustration 19. Connect Lube Oil Supply and Drain Hose
(1) 7G-7105 Hose. (2) 5P-6661 Fitting. (3) 9U-7709 Oil Drain Tube and two 5D-1026 Hose Clamps.
Illustration 20. Connect Fuel Supply and Return Lines
(4) 030-7947 Fitting, 3J-1907 O-ring Seal, and 7G-7105 Hose. (5) 8T-2160 Orifice Fitting, 3J-1907 O-ring Seal, and 7G-7105 Hose. (6) 9U-5298 Fuel Injection Line Tube Assembly (verify fuel line part number in TMI).1. Attach one end of hose (1) to the Lube Oil Supply fitting on the test stand. Attach the other end to the 5P-6661 Fitting on the rear support.2. Connect the oil drain tube (2) to the rear support and the test stand's stand-pipe with two hose clamps. On the AVM20-12C, the drain hose can be routed to the lube oil drain pan.3. Install fitting, O-ring, and hose (4) onto the fuel injection pump. Connect the other end of the hose to the "Test Oil Supply" connection on the test stand.4. Install fitting, O-ring, and hose (5) onto the fuel injection pump. Connect the other end of the hose to the "Test Oil Return" connection on the test stand.
Hold nut on 9U-6705 Master Nozzle when tightening fuel injection line tube assemblies (6). If the nut is not held in place during tightening, the master nozzle can be damaged.
5. Install six fuel injection line tube assemblies (6).Pre-Test Checks
1. Remove the lock-out on the electrical box, if installed.2. Release the Emergency Stop button.3. Start the bench and visually check for oil leaks from covers, hoses, etc.4. Check for oil flow through the drain tube. Also, check for oil flowing out of the oil