104741-4060 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047414060 16700t9070

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 104741-4060 1047414060

NISSAN-DIESEL 16700T9070 16700t9070

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-4060 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

ZEXEL 104741-4060 1047414060

NISSAN-DIESEL 16700T9070 16700t9070

Zexel num

Bosch num

Firm num

Name

104741-4060
104741-4061

16700T9070 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
ED33 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 54.3 53.8 54.8

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 51.1 49.1 53.1

Oil temperature degC 50 48 52

Injection timing adjustment_03

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 54.3 53.3 55.3

Difference in delivery mm3/st. 5

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 1900 1900 1900

Average injection quantity mm3/st. 51.8 49.4 54.2

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2150 2150 2150

Average injection quantity mm3/st. 17.6 14.6 20.6

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2300 2300 2300

Average injection quantity mm3/st. 3

Oil temperature degC 52 50 54

Injection quantity adjustment_03

Pump speed r/min 2150 2150 2150

Average injection quantity mm3/st. 17.6 14.1 21.1

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 10 8 12

Difference in delivery mm3/st. 3

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 10 7.5 12.5

Difference in delivery mm3/st. 3.5

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 55 55

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 55 55

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1000 1000 1000

Overflow quantity cm3/min 380 250 510

Stop lever angle

Pump speed r/min 1000 1000 1000

Pressure kPa 441 412 470

Pressure kgf/cm2 4.5 4.2 4.8

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1000 1000 1000

Pressure kPa 441 402 480

Pressure kgf/cm2 4.5 4.1 4.9

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1800 1800 1800

Pressure kPa 677 638 716

Pressure kgf/cm2 6.9 6.5 7.3

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1000 1000 1000

Timer stroke mm 1.4 1.2 1.6

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1000 1000 1000

Timer stroke mm 1.4 1 1.8

Oil temperature degC 50 48 52

_03

Pump speed r/min 1400 1400 1400

Timer stroke mm 3.3 2.7 3.9

Oil temperature degC 50 48 52

_04

Pump speed r/min 1800 1800 1800

Timer stroke mm 4.9 4.3 5.5

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 16 16 16

Test voltage V 25 24 26

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1.1 1 1.2

Control lever angle alpha deg. 25 21 29

Control lever angle beta deg. 36 31 41

Information:

REM07-31
Reman
October 2007PRODUCT LINE ADDITION: REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND MARINE ENGINE APPLICATIONS AnnouncementThe Caterpillar Remanufactured Products Group announces the expansion of the remanufactured injector product line to include coverage for various C7, C9, and 3306 industrial, machine, and marine applications. CoverageThe introduction of these injectors provides dealers with an additional, lower cost repair option for various C7, C9, and 3306 engine applications. Refer to the tables below for model usage. Features and BenefitsCat? Remanufactured injectors offer excellent value to customers. Customers who want fast repair turn-around, superior quality and reliability, and lower repair costs will benefit from the use of these Remanufactured injectors by providing immediate, off-the-shelf availability at a fraction of the new price. Core Acceptance Core Acceptance Crietira for Catperillar Remanufactured injectors is simple. Full core credit is issued when the core is fully assembled, there is no excessive rust or non-operational damage and it is an acceptable part number. Consult your Core Acceptance Guide for complete details.WarrantyPlease consult the appropriate warranty statement for your area.
PELJ0827 CATERPILLAR? ?2007 Caterpillar