104741-1531 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047411531 8944752180

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 104741-1531 1047411531

ISUZU 8944752180 8944752180

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-1531 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

ZEXEL 104741-1531 1047411531

ISUZU 8944752180 8944752180

Zexel num

Bosch num

Firm num

Name

104741-1531
104741-1535

8944752180 ISUZU

INJECTION-PUMP ASSEMBLY
4JA1CG *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 42.1 41.6 42.6

Difference in delivery mm3/st. 3.5

Basic *

Injection timing adjustment_02

Pump speed r/min 2400 2400 2400

Average injection quantity mm3/st. 16.1 12.6 19.6

Injection timing adjustment_03

Pump speed r/min 2000 2000 2000

Average injection quantity mm3/st. 42 38.5 45.5

Injection timing adjustment_04

Pump speed r/min 1150 1150 1150

Average injection quantity mm3/st. 42.1 41.1 43.1

Injection timing adjustment_05

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 32.2 29.7 34.7

Injection timing adjustment_06

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 27.3 23.8 30.8

Injection quantity adjustment

Pump speed r/min 2400 2400 2400

Average injection quantity mm3/st. 16.1 13.1 19.1

Difference in delivery mm3/st. 4.5

Basic *

Injection quantity adjustment_02

Pump speed r/min 2500 2500 2500

Average injection quantity mm3/st. 12

Governor adjustment

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 6 4 8

Difference in delivery mm3/st. 2

Basic *

Governor adjustment_02

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 6 4 8

Governor adjustment_03

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 3

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 80 60 100

Basic *

Speed control lever angle

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 0 0 0

0000000901

Pump speed r/min 1600 1600 1600

Overflow quantity with S/T OFF cm3/min 530 400 660

Stop lever angle

Pump speed r/min 1600 1600 1600

Pressure with S/T OFF kPa 490.5 471 510

Pressure with S/T OFF kgf/cm2 5 4.8 5.2

Basic *

Stop lever angle_02

Pump speed r/min 1150 1150 1150

Pressure with S/T OFF kPa 372.5 343 402

Pressure with S/T OFF kgf/cm2 3.8 3.5 4.1

Stop lever angle_03

Pump speed r/min 1600 1600 1600

Pressure with S/T OFF kPa 490.5 471 510

Pressure with S/T OFF kgf/cm2 5 4.8 5.2

Stop lever angle_04

Pump speed r/min 2000 2000 2000

Pressure with S/T OFF kPa 608 579 637

Pressure with S/T OFF kgf/cm2 6.1 5.9 6.3

0000001101

Pump speed r/min 1600 1600 1600

Timer stroke with S/T OFF mm 5.5 5.3 5.7

Basic *

_02

Pump speed r/min 670 670 670

Timer stroke with S/T ON mm 0.5 0.5

_03

Pump speed r/min 1000 1000 1000

Timer stroke with S/T OFF mm 1 0.4 1.6

_04

Pump speed r/min 1600 1600 1600

Timer stroke with S/T OFF mm 5.5 5.2 5.8

_05

Pump speed r/min 2000 2000 2000

Timer stroke with S/T OFF mm 7.8 7.4 8.2

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001501

Pump speed r/min 1150 1150 1150

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 7.5 6.5 8.5

Basic *

_02

Pump speed r/min 1150 1150 1150

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 7.5 6 9

Timing setting

K dimension mm 2.8 2.7 2.9

KF dimension mm 5.5 5.4 5.6

MS dimension mm 1 0.9 1.1

Pre-stroke mm 0.45 0.43 0.47

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 37 32 42

Test data Ex:

0000001501 ANEROID COMPENSATOR

ACS adjustment Full load injection quantity at high altitudes and ACS adjusting method 1. Full load injection quantity adjustment (1)Remove the ACS cover and remove the bellows and adjusting shim. (2)Perform all adjustments as per the adjustment standard except for ACS adjustment. 2. ACS adjustment (1)Assemble the ACS cover, bellows and adjusting shim. (2)At pump speed N1, adjust using a shim to obtain the decrease for the altitude shown in the table. X1 = atmospheric pressure X2 = altitude Y = decrease quantity (A) = adjustment value (B) = test value
----------
N1=1150r/min
----------

Information:

Illustration 4 g01621593
(4) The process of crimping has been improved in the location that is shown. The Fifth Improvement
The length of the bolts that secure the fuel transfer pump to the HEUI pump body have increased. The torques on the bolts that secure the transfer pump to the HEUI pump body have also increased in order to improve durability.
HEUI pumps that have been returned from the field have been inspected and broken bolts that connect the fuel transfer pump to the main HEUI pump were found.
The major symptom that is related to this issue is an oil leak between the fuel transfer pump and the HEUI pump.
The bolts that make this connection were lengthened as well as the torques were increased in order to provide a better connection.
This improvement was effective with the following part numbers: 319-0607, 319-0674, 319-0675, 319-0676, 319-0677, 319-0678, 319-0622, 319-0610 and 319-0680
Illustration 5 g01621594
(5) Location of the three bolts that have been lengthened and increased torques have been applied. Note: The applications that utilize an electric fuel transfer pump also have this improvement for the cover that goes in place of the mechanical fuel transfer pump.Note: Refer to Special Instruction , REHS3830 for the following items: parts information, installation of parts and torque procedures that are related to this improvement.All current remanufactured part numbers are being built with the latest improvements. A list of all the current new part numbers and the part numbers of the remanufactured equivalent can be seen below.
Table 1
Current New Part Numbers Remanufactured Equivalent
319-0607 -
319-0674 -
319-0675 10R7145
319-0676 10R7146
319-0677 10R7147
319-0678 10R7148
319-0622 -
319-0610 10R3044
319-0680 - Note: All part numbers that are referenced in this publication were current on 15 July 2008. Part numbers are subject to a change.
Table 2
New Part Numbers Serial Number Prefixes that Use the Part Numbers
319-0607 S/N:532, ; S/N:551, ; S/N:511, ; S/N:521, ; S/N:522, ; S/N:525, ; S/N:535, ; S/N:541, ; S/N:545, ; S/N:552, ; S/N:B3T, ; S/N:B9D, ; S/N:B9M, ; S/N:D9G
319-0674 S/N:C7D, ; S/N:C7P, ; S/N:C7Z, ; S/N:M7A
319-0675 S/N:HEP, ; S/N:BTM, ; S/N:CAP, ; S/N:CGZ, ; S/N:GAG, ; S/N:HAA, ; S/N:JAB, ; S/N:JCD, ; S/N:KDD, ; S/N:MCA, ; S/N:CYA, ; S/N:GKX, ; S/N:JNK, ; S/N:RBH, ; S/N:MKM, ; S/N:MSD, ; S/N:MSL, ; S/N:CEX, ; S/N:CEH, ; S/N:BCP, ; S/N:CLJ, ; S/N:AEM, ; S/N:AFM, ; S/N:BLE, ; S/N:BLT, ; S/N:BMK, ; S/N:BNL, ; S/N:BPM, ; S/N:BRJ, ; S/N:CAD, ; S/N:FDT, ; S/N:ACJ, ; S/N:ADE, ; S/N:BNC, ; S/N:BPP, ; S/N:BPZ, ; S/N:AAX, ; S/N:AGM, ; S/N:BMJ, ; S/N:BMY, ; S/N:BPS, ; S/N:BRZ, ; S/N:AEP, ; S/N:DAE, ; S/N:L5J, ; S/N:BRE
319-0676 S/N:101, ; S/N:102, ; S/N:103, ; S/N:104, ; S/N:125, ; S/N:202, ; S/N:301, ; S/N:302, ; S/N:AMZ, ; S/N:B1K, ; S/N:B2L, ; S/N:B3M, ; S/N:B4N, ; S/N:CAP, ; S/N:CBK, ; S/N:D3C, ; S/N:DKY
319-0677 S/N:ECH, ; S/N:AWN, ; S/N:CJX, ; S/N:JKR, ; S/N:JLS, ; S/N:JGK, ; S/N:BYE, ; S/N:T2D, ; S/N:DFP, ; S/N:SYM, ; S/N:JJG, ; S/N:LAB, ; S/N:EJC, ; S/N:KJR, ; S/N:PEH, ; S/N:CJM, ; S/N:GBR, ; S/N:KDG, ; S/N:KBE, ; S/N:DBH, ; S/N:SCR, ; S/N:GPB, ; S/N:PKE, ; S/N:C7K, ; S/N:C9M, ;