104741-1430 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047411430 8944527850


 

Information injection-pump assembly

ZEXEL 104741-1430 1047411430
ISUZU 8944527850 8944527850
104741-1430 INJECTION-PUMP ASSEMBLY
Rating:
58
Buy INJECTION-PUMP ASSEMBLY 104741-1430 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

ZEXEL 104741-1430 1047411430
ISUZU 8944527850 8944527850


Zexel num
Bosch num
Firm num
Name
104741-1430 
104741-1431 
 
8944527850  ISUZU
INJECTION-PUMP ASSEMBLY
4JB1CG *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105000-2010
Bosch type code   NP-DN12SD12TT
Nozzle holder   105780-2080
Opening pressure MPa   14.7 14.7 15.19
Opening pressure kgf/cm2   150 150 155
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-840
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   40.8 40.3 41.3
Difference in delivery mm3/st.   3.5
Basic   *
Injection timing adjustment_02
Pump speed r/min   2300 2300 2300
Average injection quantity mm3/st.   24.2 20.7 27.7
Injection timing adjustment_03
Pump speed r/min   2000 2000 2000
Average injection quantity mm3/st.   40.3 36.8 43.8
Injection timing adjustment_04
Pump speed r/min   1900 1900 1900
Average injection quantity mm3/st.   41.3 37.8 44.8
Injection timing adjustment_05
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   40.7 38.2 43.2
Injection timing adjustment_06
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   40.8 39.8 41.8
Injection timing adjustment_07
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   35.8 33.3 38.3
Injection timing adjustment_08
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   36.4 32.4 40.4
Injection quantity adjustment
Pump speed r/min   2300 2300 2300
Average injection quantity mm3/st.   24.2 21.2 27.2
Difference in delivery mm3/st.   3.5
Basic   *
Injection quantity adjustment_02
Pump speed r/min   2500 2500 2500
Average injection quantity mm3/st.   6
Governor adjustment
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   6 4 8
Difference in delivery mm3/st.   2
Basic   *
Governor adjustment_02
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   6 4 8
Governor adjustment_03
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   3
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 60 100
Basic   *
Speed control lever angle
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   0 0 0
Remarks
Magnet OFF
 
0000000901
Pump speed r/min   1600 1600 1600
Overflow quantity cm3/min   429 300 558
Stop lever angle
Pump speed r/min   1600 1600 1600
Pressure kPa   490.5 471 510
Pressure kgf/cm2   5 4.8 5.2
Basic   *
Stop lever angle_02
Pump speed r/min   1600 1600 1600
Pressure kPa   490.5 471 510
Pressure kgf/cm2   5 4.8 5.2
Stop lever angle_03
Pump speed r/min   2000 2000 2000
Pressure kPa   617.5 588 647
Pressure kgf/cm2   6.3 6 6.6
Stop lever angle_04
Pump speed r/min   1020 1020 1020
Pressure kPa   333.5 304 363
Pressure kgf/cm2   3.4 3.1 3.7
0000001101
Pump speed r/min   1600 1600 1600
Timer stroke mm   4.8 4.6 5
Basic   *
_02
Pump speed r/min   1600 1600 1600
Timer stroke mm   4.8 4.5 5.1
_03
Pump speed r/min   2000 2000 2000
Timer stroke mm   7.8 7.4 8.2
_04
Pump speed r/min   1020 1020 1020
Timer stroke mm   0.55 0 1.1
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   2.8 2.7 2.9
KF dimension mm   5.5 5.4 5.6
MS dimension mm   1 0.9 1.1
Pre-stroke mm   0.45 0.43 0.47
Control lever angle alpha deg.   18 14 22
Control lever angle beta deg.   37 32 42




Information:

Introduction
The problem identified below does not have a permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
There are reports of C4.4 DEF pumps failing in cold weather, below approximately −29° C (−20° F) , but the pumps are "No Fault Found" when returned for evaluation.Solution
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Ensure that the engine is stopped before any servicing or repair is performed. The Diesel Exhaust Fluid (DEF) system must have completed a proper shutdown. Service on the DEF pump prior to completion of a proper shutdown can result in DEF spray and spillage.
Do not turn off the battery disconnect switch until the indicator lamp has turned off. If the switch is turned off when the indicator lamp is illuminated, the Diesel Exhaust Fluid (DEF) system may not shut down properly. If the DEF system does not shut down properly, DEF could freeze and damage the pump and lines.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Cat Dealer Service Tool Catalog" or refer to Special Publication, PECJ0003, "Cat Shop Supplies and Tools Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Note: Clean water should be used to wash spilled DEF off machine components and surfaces.Note: Wear gloves when handling the DEF filter.When troubleshooting the DEF pump during cold weather, the Compensator Plug within the DEF pump is designed to prevent pump operation if the DEF within the pump is frozen. The Compensator Plug will temporarily be pushed to the OFF position by the frozen DEF. The pump should return to the ON position once the DEF thaws.
Illustration 1 g06278274
(1) Protective cover
Remove protective cover (1).
Illustration 2 g06278289
(2) DEF filter cap
Use a suitable tool to remove DEF filter cap (2).
Illustration 3 g06278325
(3) Compensator
With the filter installed in the DEF pump, carefully remove compensator (3).
Illustration 4 g06278356
(A) 38 mm (1.5 inch)
(B) 97 mm (3.8 inch)
Inspect the compensator.If frozen DEF within the pump is identified as the root cause of the issue, submit a SIMSi report, complete with TIB number M0094916, CPI number 411775 and submit through the CPI feedback tool within the SIMSi.

Have questions with 104741-1430?





Group cross 104741-1430 ZEXEL

Isuzu 

 
8944528190 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528191 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528192 
INJECTION-PUMP ASSEMBLY
4JB1CGT
9 460 612 130 
8944528193 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528310 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528311 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528312 
INJECTION-PUMP ASSEMBLY
4JB1CGT
9 460 614 347 
8944528313 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528370 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
 
INJECTION-PUMP ASSEMBLY
 
8944528372 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528374 
INJECTION-PUMP ASSEMBLY
4JB1CGT
9 460 612 131 
8944528375 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
 
INJECTION-PUMP ASSEMBLY
4JB1CGT
104741-1430  

104741-1431 
 
8944527850 
INJECTION-PUMP ASSEMBLY
4JB1CG
9 460 612 132 
8944527851 
INJECTION-PUMP ASSEMBLY
4JB1CG
 
8944336250 
INJECTION-PUMP ASSEMBLY
4JD1
 
8944336251 
INJECTION-PUMP ASSEMBLY
4JD1
 
8944336252 
INJECTION-PUMP ASSEMBLY
4JD1
9 460 613 493 
8944336253 
INJECTION-PUMP ASSEMBLY
4JD1
 
8944378620 
INJECTION-PUMP ASSEMBLY
4JE1
 
8944378621 
INJECTION-PUMP ASSEMBLY
4JE1
 
8944378622 
INJECTION-PUMP ASSEMBLY
4JE1
9 460 614 348 
8944378623 
INJECTION-PUMP ASSEMBLY
4JE1
 
8944528150 
INJECTION-PUMP ASSEMBLY
4JB1CGHM
 
8944528151 
INJECTION-PUMP ASSEMBLY
4JB1CGHM
 
8944528152 
INJECTION-PUMP ASSEMBLY
4JB1CG
9 460 612 133 
8944528153 
INJECTION-PUMP ASSEMBLY
4JB1CG
 
8944528251 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944528252 
INJECTION-PUMP ASSEMBLY
4JB1CGT
9 460 612 134 
8944528253 
INJECTION-PUMP ASSEMBLY
4JB1CGT
 
8944836290 
INJECTION-PUMP ASSEMBLY
4JF1
9 460 614 349 
8944836291 
INJECTION-PUMP ASSEMBLY
4JF1
Back to top