104741-1270 ZEXEL 9 460 610 284 BOSCH INJECTION-PUMP ASSEMBLY 9460610284 1047411270 8944268510

Information injection-pump assembly

BOSCH 9 460 610 284 9460610284

ZEXEL 104741-1270 1047411270

ISUZU 8944268510 8944268510

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-1270 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104741-1270
1.	_
2.	FUEL INJECTION PUMP	104641-1170
3.	NUMBER PLATE	146639-9700
4.	_
5.	CAPSULE	146620-0120
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-4075
8.	Nozzle and Holder	8-94122-260-3
9.	Open Pre:MPa(Kqf/cm2)	18.1{185}
10.	NOZZLE-HOLDER	105048-3890
11.	NOZZLE	105017-1550

Scheme ###:

1/6.	[1]	146601-0100	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP D20
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0001	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-0120	ROLLER SET MMC C=1.2
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0220	CAM PLATE '02'SK3074
30.	[1]	146600-0800	O-RING
31.	[1]	146300-0300	PUMP PLUNGER ' 3' 5-7.
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-2200	COMPRESSION SPRING K=1.05
34B.	[1]	146302-2100	COMPRESSION SPRING K=1.05
34C.	[1]	146302-1700	COMPRESSION SPRING K=1.15
34D.	[1]	146302-1600	COMPRESSION SPRING K=1.15
34E.	[1]	146302-2400	COMPRESSION SPRING K=1.25
34F.	[1]	146302-2300	COMPRESSION SPRING K=1.25
35/1.	[1]	146603-0700	SHIM
35/1.	[1]	146603-0800	SHIM
35/1.	[1]	146603-0900	SHIM
35/1.	[1]	146603-1000	SHIM
35/1.	[1]	146603-1100	SHIM
35/1.	[1]	146603-3600	SHIM
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0500	COVER 4J
38.	[2]	139106-0200	FLAT-HEAD SCREW
39.	[1]	146310-0100	COVER
40.	[2]	139106-0000	FLAT-HEAD SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0000	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM
48/1.	[1]	146603-0100	SHIM
48/1.	[1]	146603-0200	SHIM
48/1.	[1]	146603-0300	SHIM
48/1.	[1]	146603-0400	SHIM
48/1.	[1]	146603-0500	SHIM
48/1.	[1]	146603-0600	SHIM
48/1.	[1]	146690-1400	SHIM
48/1.	[1]	146690-1500	SHIM
48/1.	[1]	146690-1600	SHIM
48/1.	[1]	146690-1700	SHIM
48/1.	[1]	146690-1800	SHIM
48/1.	[1]	146690-1900	SHIM
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146402-0820	HYDRAULIC HEAD D11 2X4.0 A0
50.	[1]	146402-0820	HYDRAULIC HEAD D11 2X4.0 A0
50.	[1]	146402-0820	HYDRAULIC HEAD D11 2X4.0 A0
51.	[1]	146600-0000	O-RING
52/1.	[1]	146490-0000	SHIM
52/1.	[1]	146490-0100	SHIM
52/1.	[1]	146490-0200	SHIM
52/1.	[1]	146490-0300	SHIM
52/1.	[1]	146490-0400	SHIM
52/1.	[1]	146490-0500	SHIM
52/1.	[1]	146490-0600	SHIM
52/1.	[1]	146490-0700	SHIM
52/1.	[1]	146490-0800	SHIM
52/1.	[1]	146490-0900	SHIM
52/1.	[1]	146490-1000	SHIM
52/1.	[1]	146490-1100	SHIM
52/1.	[1]	146490-1200	SHIM
52/1.	[1]	146490-1300	SHIM
52/1.	[1]	146490-1400	SHIM
52/1.	[1]	146490-1500	SHIM
52/1.	[1]	146490-1600	SHIM
52/1.	[1]	146490-1700	SHIM
52/1.	[1]	146490-1800	SHIM
52/1.	[1]	146490-1900	SHIM
52/1.	[1]	146490-2000	SHIM
52/1.	[1]	146490-2100	SHIM
52/1.	[1]	146490-2200	SHIM
52/1.	[1]	146490-2300	SHIM
52/1.	[1]	146490-2400	SHIM
52/1.	[1]	146490-2500	SHIM
52/1.	[1]	146490-2600	SHIM
52/1.	[1]	146490-2700	SHIM
52/1.	[1]	146490-2800	SHIM
52/1.	[1]	146490-2900	SHIM
52/1.	[1]	146490-3000	SHIM
52/1.	[1]	146490-3100	SHIM
52/1.	[1]	146490-3200	SHIM
52/1.	[1]	146490-3300	SHIM
52/1.	[1]	146490-3400	SHIM
52/1.	[1]	146490-3500	SHIM
52/1.	[1]	146490-3600	SHIM
52/1.	[1]	146490-3700	SHIM
52/1.	[1]	146490-3800	SHIM
52/1.	[1]	146490-3900	SHIM
52/1.	[1]	146490-4000	SHIM
52/1.	[1]	146490-4100	SHIM
52/1.	[1]	146490-4200	SHIM
52/1.	[1]	146490-4300	SHIM
52/1.	[1]	146490-4400	SHIM
52/1.	[1]	146490-4500	SHIM
52/1.	[1]	146490-4600	SHIM
52/1.	[1]	146490-4700	SHIM
52/1.	[1]	146490-4800	SHIM
52/1.	[1]	146490-4900	SHIM
52/1.	[1]	146490-5000	SHIM
54.	[4]	146433-0100	GASKET
55.	[4]	146430-1420	DELIVERY-VALVE ASSEMBLY 'VE15'VR45
56.	[4]	146432-0200	COMPRESSION SPRING K=1.0
57.	[4]	146602-2300	FILLER PIECE
58.	[4]	146440-0600	FITTING L=40.5
60.	[4]	139106-0100	FLAT-HEAD SCREW
67.	[1]	146500-7120	GOVERNOR COVER IMC 4JB1-A
67/2.	[1]	146515-2520	CONTROL SHAFT R17.5
67/3.	[1]	146600-0100	O-RING
67/4.	[1]	139310-0200	PLAIN WASHER
67/5.	[1]	146535-1900	CONTROL LEVER
67/5B.	[1]	146535-2000	CONTROL LEVER
67/6.	[1]	014110-6440	LOCKING WASHER
67/7.	[1]	013020-6040	UNION NUT
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	029240-6010	UNION NUT
67/15.	[1]	146526-1800	BLEEDER SCREW
67/16.	[1]	146526-0200	BLEEDER SCREW
67/18.	[1]	146587-1100	COILED SPRING
67/23.	[1]	146626-6000	BRACKET 4J
67/24.	[2]	139106-0500	FLAT-HEAD SCREW
67/25.	[2]	014110-6440	LOCKING WASHER
87.	[1]	139308-0300	PLAIN WASHER
88.	[1]	146545-0300	THREADED PIN
88B.	[1]	146545-0400	THREADED PIN
88C.	[1]	146545-0500	THREADED PIN
90.	[1]	139208-0100	UNION NUT
91.	[1]	146600-1200	O-RING
92.	[1]	146600-1000	SEAL RING
95.	[1]	146565-0120	FULCRUM LEVER I=1.9
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET
106.	[2]	146588-0000	COILED SPRING
107.	[1]	146569-0100	UNION NUT
108.	[1]	146570-0000	GOVERNOR SHAFT L
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM
110/1.	[1]	146571-0100	SHIM
110/1.	[1]	146571-0200	SHIM
110/1.	[1]	146571-0300	SHIM
110/1.	[1]	146571-0400	SHIM
110/1.	[1]	146571-0500	SHIM
110/1.	[1]	146571-0600	SHIM
110/1.	[1]	146571-0700	SHIM
110/1.	[1]	146571-0800	SHIM
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-0700	SLIDING SLEEVE '07' D0.5
116.	[1]	146576-0000	SEALING CAP
117/1.	[1]	146577-0000	PLUG
117/1.	[1]	146577-0100	PLUG
117/1.	[1]	146577-0200	PLUG
117/1.	[1]	146577-0300	PLUG
117/1.	[1]	146577-0400	PLUG
117/1.	[1]	146577-0500	PLUG
117/1.	[1]	146577-0600	PLUG
117/1.	[1]	146577-0700	PLUG
117/1.	[1]	146577-0800	PLUG
117/1.	[1]	146577-0900	PLUG
117/1.	[1]	146577-1000	PLUG
117/1.	[1]	146577-1100	PLUG
117/1.	[1]	146577-1200	PLUG
117/1.	[1]	146577-1300	PLUG
117/1.	[1]	146577-1400	PLUG
117/1.	[1]	146577-1500	PLUG
117/1.	[1]	146577-1600	PLUG
117/1.	[1]	146577-1700	PLUG
117/1.	[1]	146577-5000	PLUG
117/1.	[1]	146577-5100	PLUG
117/1.	[1]	146577-5200	PLUG
117/1.	[1]	146577-5300	PLUG
117/1.	[1]	146577-5400	PLUG
117/1.	[1]	146577-5500	PLUG
117/1.	[1]	146577-5600	PLUG
117/1.	[1]	146577-5700	PLUG
117/1.	[1]	146577-5800	PLUG
117/1.	[1]	146577-5900	PLUG
117/1.	[1]	146577-6000	PLUG
117/1.	[1]	146577-6100	PLUG
117/1.	[1]	146577-6200	PLUG
117/1.	[1]	146577-6300	PLUG
117/1.	[1]	146577-6400	PLUG
117/1.	[1]	146577-6500	PLUG
117/1.	[1]	146577-6600	PLUG
120.	[1]	146579-0320	RETAINING PIN
122.	[1]	146580-2000	GOVERNOR SPRING K=0.4
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0320	CAPSULE D14 DI
130/2.	[1]	026508-1140	GASKET
130/3.	[1]	146422-0300	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0620	CONTROL VALVE '06'2XD1.6K=2.
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146650-2420	PULLING ELECTROMAGNET ' 24'12V 4XD0
137.	[2]	029331-4010	GASKET
138.	[1]	146606-6920	INLET UNION S/T B2 B2 B3
145.	[1]	013020-5240	UNION NUT
146.	[1]	023500-5140	PLAIN WASHER
160.	[1]	146625-8020	PLATE
200.	[1]	146206-0100	COILED SPRING
205.	[1]	029470-4030	WOODRUFF KEY
233.	[1]	146658-3820	WIRE ' ' 12V
239.	[1]	023500-5140	PLAIN WASHER
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-0210	WIRE
243.	[1]	013020-5240	UNION NUT
245.	[3]	026512-1840	GASKET
246.	[1]	146125-0000	EYE BOLT
248.	[1]	146614-0200	SPACER BUSHING
800S.	[1]	146009-6720	PUMP HOUSING 3
800S/1/6.	[1]	146601-0100	PACKING RING
800S/1/6.	[1]	146601-0100	PACKING RING
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
903.	[1]	146620-0120	CAPSULE
903/2.	[1]	146600-1300	O-RING
906.	[1]	146639-9700	NUMBER PLATE 41-1270
918.	[1]	146640-6000	NAMEPLATE

Include in #2:

104741-1270 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num

Bosch num

Firm num

Name

104741-1270
104741-1272

9 460 610 284

8944268510 ISUZU

INJECTION-PUMP ASSEMBLY
4JB1A *

Information:

Introduction
The following procedures contain crucial information on correctly installing the new 162-2501 Hose As and the 258-8917 Protection Sleeve .Note: The 162-2501 Hose As replaces 107-7942 Tube As .Installation Procedure of the Hose Assembly
Illustration 1 g01230674
Remove old 162-2501 Hose As (1). Keep all of the manifold and pump fittings attached.Note: Step 2 is only for 3408E engines.
Remove the 7W-6492 Pipe Plug (2) from the aftercooler housing (3). Install the 8T-6762 Pipe Plug into the aftercooler housing.
Illustration 2 g01230678
Note: Always tighten the fittings with your hand before you use a wrench. Support the hose and the elbow while you tighten in order to avoid the following damage: twisting, kinking and side loading.
Loosen elbow (4) and jam nut (5) .
Hand tighten the nut on the hose (5) to the elbow (4) .
Install the other end of the hose (6) to the pump fitting. Tighten the nut to 125 15 N m (90 11 lb ft).
Hold the elbow (4) in position and torque the jam nut to 145 15 N m (105 11 lb ft).
Support the elbow (4). Tighten the nut (5) on the hose to 125 15 N m (90 11 lb ft).
Illustration 3 g01230687
Illustration 3 shows the routing of the 162-2501 Hose As (8). The hose is routed from the rail, around the rear of the fuel transfer pump (9), and into the 90 degree fitting (7) that is installed into the pump.
Illustration 4 g01230689
Some 3408 engines use an aftercooler that is mounted high. The mounting bracket (10) is located close to the 162-2501 Hose As (8). If there is not enough clearance to install the protective sleeve, the hose will need to be loosened and the hose will need to be repositioned. Refer to 5 for repositioning of the hose.
Illustration 5 g01230690
The hose must be realigned if any of the following conditions exist:
Not enough clearance against the fuel transfer pump
Not enough clearance against the support bracket
Loosen the end of the hose (12) .
Loosen the elbow and the jam nut (11). Note: Do not remove the hose.
Reposition the hose in order to acquire the desired clearance.
Hold the end of the hose (12). Tighten the jam nut (11) .Tighten the jam nut to the following torque. ... 143 15 N m (105 11 lb ft)Note: Locking pliers can be used on the crimped portion of the hose. Do not use the locking pliers on the braided portion of the hose. This will damage the hose which will cause a failure.
Tighten the end of the hose (12) .Tighten the end of the hose to the following torque. ... 125 15 N m (92 11 lb ft)Note: If adjustment of the hose is required, make sure that the hose is not bent. Also, ensure that the hose is not twisted. If these conditions exist the PTFE liner can be damaged.Installation of the Protective Sleeve Over the New Hose Assembly
Illustration 6 g01106118
Top viewInstallation of a protective sleeve for the hoses of the