104741-1131 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047411131 8941571111

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

ZEXEL 104741-1131 1047411131

ISUZU 8941571111 8941571111

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104741-1131 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104741-1131
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE	146638-9100
4.	_
5.	CAPSULE	146620-0120
6.	ADJUSTING DEVICE	593175-4220
7.	NOZZLE AND HOLDER ASSY	105118-4075
8.	Nozzle and Holder	8-94122-260-3
9.	Open Pre:MPa(Kqf/cm2)	18.1{185}
10.	NOZZLE-HOLDER	105048-3890
11.	NOZZLE	105017-1550

Scheme ###:

1.	[1]	146002-0320	PUMP HOUSING 3K D20 L R
1/6.	[1]	146601-0100	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP D20
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0320	DRIVE SHAFT D20 L
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0001	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-0120	ROLLER SET MMC C=1.2
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0420	CAM PLATE '04'SK3196
30.	[1]	146600-0800	O-RING
31.	[1]	146300-0300	PUMP PLUNGER ' 3' 5-7.
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-1700	COMPRESSION SPRING K=1.15
34B.	[1]	146302-1600	COMPRESSION SPRING K=1.15
34C.	[1]	146302-2200	COMPRESSION SPRING K=1.05
34D.	[1]	146302-2100	COMPRESSION SPRING K=1.05
34E.	[1]	146302-2400	COMPRESSION SPRING K=1.25
34F.	[1]	146302-2300	COMPRESSION SPRING K=1.25
35.	[1]	029998-0710	SHIM
35/1.	[1]	146603-0700	SHIM
35/1.	[1]	146603-0800	SHIM
35/1.	[1]	146603-0900	SHIM
35/1.	[1]	146603-1000	SHIM
35/1.	[1]	146603-1100	SHIM
35/1.	[1]	146603-3600	SHIM
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0500	COVER 4J
38.	[2]	139106-0200	FLAT-HEAD SCREW
39.	[1]	146310-0100	COVER
40.	[2]	139106-0000	FLAT-HEAD SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0000	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48.	[2]	029998-0570	SHIM
48/1.	[1]	146603-0000	SHIM
48/1.	[1]	146603-0100	SHIM
48/1.	[1]	146603-0200	SHIM
48/1.	[1]	146603-0300	SHIM
48/1.	[1]	146603-0400	SHIM
48/1.	[1]	146603-0500	SHIM
48/1.	[1]	146603-0600	SHIM
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146402-0820	HYDRAULIC HEAD D11 2X4.0 A0
50.	[1]	146402-0820	HYDRAULIC HEAD D11 2X4.0 A0
50.	[1]	146402-0820	HYDRAULIC HEAD D11 2X4.0 A0
51.	[1]	146600-0000	O-RING
52.	[1]	029998-0330	SHIM
52/1.	[1]	146490-0000	SHIM
52/1.	[1]	146490-0100	SHIM
52/1.	[1]	146490-0200	SHIM
52/1.	[1]	146490-0300	SHIM
52/1.	[1]	146490-0400	SHIM
52/1.	[1]	146490-0500	SHIM
52/1.	[1]	146490-0600	SHIM
52/1.	[1]	146490-0700	SHIM
52/1.	[1]	146490-0800	SHIM
52/1.	[1]	146490-0900	SHIM
52/1.	[1]	146490-1000	SHIM
52/1.	[1]	146490-1100	SHIM
52/1.	[1]	146490-1200	SHIM
52/1.	[1]	146490-1300	SHIM
52/1.	[1]	146490-1400	SHIM
52/1.	[1]	146490-1500	SHIM
52/1.	[1]	146490-1600	SHIM
52/1.	[1]	146490-1700	SHIM
52/1.	[1]	146490-1800	SHIM
52/1.	[1]	146490-1900	SHIM
52/1.	[1]	146490-2000	SHIM
52/1.	[1]	146490-2100	SHIM
52/1.	[1]	146490-2200	SHIM
52/1.	[1]	146490-2300	SHIM
52/1.	[1]	146490-2400	SHIM
52/1.	[1]	146490-2500	SHIM
52/1.	[1]	146490-2600	SHIM
52/1.	[1]	146490-2700	SHIM
52/1.	[1]	146490-2800	SHIM
52/1.	[1]	146490-2900	SHIM
52/1.	[1]	146490-3000	SHIM
52/1.	[1]	146490-3100	SHIM
52/1.	[1]	146490-3200	SHIM
52/1.	[1]	146490-3300	SHIM
52/1.	[1]	146490-3400	SHIM
52/1.	[1]	146490-3500	SHIM
52/1.	[1]	146490-3600	SHIM
52/1.	[1]	146490-3700	SHIM
52/1.	[1]	146490-3800	SHIM
52/1.	[1]	146490-3900	SHIM
52/1.	[1]	146490-4000	SHIM
52/1.	[1]	146490-4100	SHIM
52/1.	[1]	146490-4200	SHIM
52/1.	[1]	146490-4300	SHIM
52/1.	[1]	146490-4400	SHIM
52/1.	[1]	146490-4500	SHIM
52/1.	[1]	146490-4600	SHIM
52/1.	[1]	146490-4700	SHIM
52/1.	[1]	146490-4800	SHIM
52/1.	[1]	146490-4900	SHIM
52/1.	[1]	146490-5000	SHIM
54.	[4]	146433-0100	GASKET
55.	[4]	146430-1420	DELIVERY-VALVE ASSEMBLY 'VE15'VR45
56.	[4]	146432-0200	COMPRESSION SPRING K=1.0
57.	[4]	146602-2300	FILLER PIECE
58.	[4]	146440-0600	FITTING L=40.5
60.	[4]	139106-0100	FLAT-HEAD SCREW
67.	[1]	146500-5020	GOVERNOR COVER
67/2.	[1]	146515-0220	CONTROL SHAFT R20
67/3.	[1]	146600-0100	O-RING
67/4.	[1]	139310-0200	PLAIN WASHER
67/5.	[1]	146533-9800	CONTROL LEVER
67/5B.	[1]	146533-9900	CONTROL LEVER
67/6.	[1]	014110-6440	LOCKING WASHER
67/7.	[1]	013020-6040	UNION NUT
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	029240-6010	UNION NUT
67/15.	[1]	146526-1800	BLEEDER SCREW
67/16.	[1]	146526-0200	BLEEDER SCREW
67/18.	[1]	146587-1100	COILED SPRING
67/23.	[1]	146626-6000	BRACKET 4J
67/24.	[2]	139106-0500	FLAT-HEAD SCREW
67/25.	[2]	014110-6440	LOCKING WASHER
87.	[1]	139308-0300	PLAIN WASHER
88.	[1]	146545-0300	THREADED PIN
88B.	[1]	146545-0400	THREADED PIN
88C.	[1]	146545-0500	THREADED PIN
90.	[1]	139208-0100	UNION NUT
91.	[1]	146600-1200	O-RING
92.	[1]	146600-1000	SEAL RING
95.	[1]	146565-0020	FULCRUM LEVER I=1.9
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET
106.	[2]	146588-0000	COILED SPRING
107.	[1]	146569-0100	UNION NUT
108.	[1]	146570-0000	GOVERNOR SHAFT L
109.	[1]	146600-0400	O-RING
110.	[1]	029998-4130	SHIM
110/1.	[1]	146571-0000	SHIM
110/1.	[1]	146571-0100	SHIM
110/1.	[1]	146571-0200	SHIM
110/1.	[1]	146571-0300	SHIM
110/1.	[1]	146571-0400	SHIM
110/1.	[1]	146571-0500	SHIM
110/1.	[1]	146571-0600	SHIM
110/1.	[1]	146571-0700	SHIM
110/1.	[1]	146571-0800	SHIM
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-0700	SLIDING SLEEVE '07' D0.5
116.	[1]	146576-0000	SEALING CAP
117.	[1]	029998-5460	PLUG
117/1.	[1]	146577-0000	PLUG
117/1.	[1]	146577-0100	PLUG
117/1.	[1]	146577-0200	PLUG
117/1.	[1]	146577-0300	PLUG
117/1.	[1]	146577-0400	PLUG
117/1.	[1]	146577-0500	PLUG
117/1.	[1]	146577-0600	PLUG
117/1.	[1]	146577-0700	PLUG
117/1.	[1]	146577-0800	PLUG
117/1.	[1]	146577-0900	PLUG
117/1.	[1]	146577-1000	PLUG
117/1.	[1]	146577-1100	PLUG
117/1.	[1]	146577-1200	PLUG
117/1.	[1]	146577-1300	PLUG
117/1.	[1]	146577-1400	PLUG
117/1.	[1]	146577-1500	PLUG
117/1.	[1]	146577-1600	PLUG
117/1.	[1]	146577-1700	PLUG
120.	[1]	146579-0420	RETAINING PIN
122.	[1]	146580-1000	GOVERNOR SPRING K=0.28
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0320	CAPSULE D14 DI
130/2.	[1]	026508-1140	GASKET
130/3.	[1]	146422-0300	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0620	CONTROL VALVE '06'2XD1.6K=2.
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146650-2420	PULLING ELECTROMAGNET ' 24'12V 4XD0
137.	[2]	029331-4010	GASKET
138.	[1]	146606-3920	PIPE S/T B2 B2 B3
145.	[1]	013020-5240	UNION NUT
146.	[1]	023500-5140	PLAIN WASHER
160.	[1]	146625-8020	PLATE
200.	[1]	146206-0100	COILED SPRING
205.	[1]	029470-4030	WOODRUFF KEY
233.	[1]	146658-3820	WIRE ' ' 12V
239.	[1]	023500-5140	PLAIN WASHER
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-0210	WIRE
243.	[1]	013020-5240	UNION NUT
245.	[3]	026512-1840	GASKET
246.	[1]	146125-0000	EYE BOLT
248.	[1]	146614-0200	SPACER BUSHING
800S.	[1]	146009-6720	PUMP HOUSING 3
800S/1.	[1]	146002-0320	PUMP HOUSING 3K D20 L R
800S/1/6.	[1]	146601-0100	PACKING RING
800S/1/6.	[1]	146601-0100	PACKING RING
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
903.	[1]	146620-0120	CAPSULE
903.	[1]	146620-0120	CAPSULE
903/2.	[1]	146600-1300	O-RING
905.	[1]	593175-4220	ADJUSTING DEVICE
906.	[1]	146638-9100	NUMBER PLATE 4JB1-B
912.	[2]	020146-1240	BLEEDER SCREW
918.	[1]	146640-6100	NAMEPLATE

Include in #2:

104741-1131 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 104741-1131 1047411131

ISUZU 8941571111 8941571111

Zexel num

Bosch num

Firm num

Name

104741-1131
104741-1132

8941571111 ISUZU

INJECTION-PUMP ASSEMBLY
4JB1-B *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

(Solenoid timer adjustment condition) OFF

Injection timing adjustment

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 47.2 46.7 47.7

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 47 43.5 50.5

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 42.9 40.9 44.9

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 47.2 46.2 48.2

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1450 1450 1450

Average injection quantity mm3/st. 50.8 48.8 52.8

Oil temperature degC 50 48 52

Injection timing adjustment_06

Pump speed r/min 1800 1800 1800

Average injection quantity mm3/st. 48 45.5 50.5

Difference in delivery mm3/st. 5.5

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 13 10 16

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2300 2300 2300

Average injection quantity mm3/st. 5

Oil temperature degC 52 50 54

Injection quantity adjustment_03

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 13 10 16

Difference in delivery mm3/st. 4

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 390 390 390

Average injection quantity mm3/st. 8 6 10

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 390 390 390

Average injection quantity mm3/st. 8 6 10

Difference in delivery mm3/st. 2

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 75 75 115

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 95 75 115

Oil temperature degC 48 46 50

Speed control lever angle

Pump speed r/min 390 390 390

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1600 1600 1600

Overflow quantity cm3/min 540 410 670

Oil temperature degC 50 48 52

Remarks
OFF

Stop lever angle

Pump speed r/min 1600 1600 1600

Pressure with S/T OFF kPa 549 529 569

Pressure with S/T OFF kgf/cm2 5.6 5.4 5.8

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

Stop lever angle_02

Pump speed r/min 1600 1600 1600

Pressure with S/T OFF kPa 539 519 559

Pressure with S/T OFF kgf/cm2 5.5 5.3 5.7

Basic *

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1900 1900 1900

Pressure with S/T OFF kPa 637 608 666

Pressure with S/T OFF kgf/cm2 6.5 6.2 6.8

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1600 1600 1600

Timer stroke with S/T OFF mm 1.9 1.7 2.1

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

_02

Pump speed r/min 790 690 890

Timer stroke with S/T ON mm 0.5

Oil temperature degC 50 48 52

_03

Pump speed r/min 1490 1440 1540

Timer stroke with S/T OFF mm 0.5 0.5 0.5

Oil temperature degC 50 48 52

_04

Pump speed r/min 1600 1600 1600

Timer stroke with S/T OFF mm 1.9 1.7 2.1

Basic *

Oil temperature degC 50 48 52

_05

Pump speed r/min 1800 1800 1800

Timer stroke with S/T OFF mm 4.6 4.3 4.9

Oil temperature degC 50 48 52

_06

Pump speed r/min 1900 1900 1900

Timer stroke with S/T OFF mm 5.7 5.4 6.1

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 2.8 2.7 2.9

KF dimension mm 5 4.9 5.1

MS dimension mm 1 0.9 1.1

Pre-stroke mm 1.45 1.43 1.47

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 31 26 36

Test data Ex:

0000001801 V-FICD ADJUSTMENT

Adjustment of the V-FICD 1. Adjust the actuator rod to obtain S1. 2. Apply negative pressure of P1kPa {P2 mmHg} to the actuator and confirm that it moves through its full stroke. (A) Control lever (Idling position)
----------
S1=1+1mm P1=-53.3kPa P2=-400mmHg
----------
S1=1+1mm

Information:

Tools that are Required for Installation
Table 2
Required Tools
Tool Part Number Part Description Qty
B 9U-6862 Tapered Brush 1
9U-6863 Small Bore Brush 1
9U-7244 End Brush 1
9U-7237 Brush Extension 1
4C-5552 Large Bore Brush 1
C (1) 221-9778 Puller Stud 1
D (1) 9U-7258 Driver Cap 1
E 4C-9507 Retaining Compound -
( 1 ) Part of the 9U-6891 Injector Tool Group Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the electronic unit injector. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Illustration 1 g01016237
Install the puller stud from Tooling (A) into unit injector sleeve (1) .
Install the following parts from Tooling (A) over the stud: bridge puller, thrust bearing, hard washer and nut.
Tighten the nut until unit injector sleeve (1) is pulled free of the cylinder head assembly.Installation Procedure
Use Tooling (B) to clean the bore in the cylinder head for the electronic unit injector sleeve.
Ensure that the electronic unit injector sleeve and the cylinder head bore are completely free of oil, dirt, and sealant debris.
Illustration 2 g01120522
Install new O-ring seals (2) on electronic unit injector sleeve (1) .Note: Do not apply Tooling (E) to the cylinder head surfaces. Apply Tooling (E) on the electronic unit injector sleeve only.
Apply Tooling (E) to the contact surface of electronic unit injector sleeve (1) on the surface that is marked "X".
Lubricate O-ring seals (2) with clean engine oil.
Illustration 3 g01076119
Install Tooling (C) into the threads of electronic unit injector sleeve (1) .
Position Tooling (C) and the electronic unit injector sleeve in the cylinder head. Use care not to damage the O-ring seal on the electronic unit injector sleeve.
Use Tooling (D) and a hammer to install electronic unit injector sleeve (1) in the cylinder head.
Ensure that the electronic unit injector sleeve is properly seated in the cylinder head. The Tooling will "RING" when the electronic unit injector sleeve is fully seated in the bore of the cylinder head.
Remove Tooling (D) and Tooling (C). Use a clean towel and remove excess Tooling (E) .
Install the electronic unit injector. Refer to Disassembly and Assembly, "Electronic Unit Injector - Install".
Fill the cooling system with coolant. Refer to Operation and Maintenance, "Refill Capacities" for the cooling system capacity.