Information injection-pump assembly
BOSCH
9 460 613 634
9460613634
ZEXEL
104740-9432
1047409432

Rating:
Components :
0. | INJECTION-PUMP ASSEMBLY | 104740-9432 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104640-9432 |
3. | NUMBER PLATE | 146901-7200 |
4. | _ | |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105148-1151 |
8. | Nozzle and Holder | 16600-43G23 |
9. | Open Pre:MPa(Kqf/cm2) | 9.8{100} |
10. | NOZZLE-HOLDER | 105078-0050 |
11. | NOZZLE | 105007-1130 |
Scheme ###:
1/6. | [1] | 146601-0900 | PACKING RING |
6. | [1] | 146100-0420 | SUPPLY PUMP |
9. | [1] | 146103-0100 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0020 | DRIVE SHAFT |
12/1. | [1] | 146200-0000 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-2320 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0020 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146311-6120 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
34. | [1] | 146312-1800 | COMPRESSION SPRING |
35/1. | [1] | 146690-3200 | SHIM D11.5&9.4T0.1 |
35/1. | [1] | 146690-3300 | SHIM D11.5&9.4T0.2 |
35/1. | [1] | 146690-3400 | SHIM D11.5&9.4T0.25 |
35/1. | [1] | 146690-3500 | SHIM D11.5&9.4T1.0 |
35/1. | [1] | 146690-4100 | SHIM D11.5&9.4T2 |
35/1. | [1] | 146690-4200 | SHIM D11.5&9.4T0.5 |
35/1. | [1] | 146690-4300 | SHIM D11.5&9.4T0.75 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-4020 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
41. | [1] | 146312-1900 | COMPRESSION SPRING |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM D17&5.2T2.1 |
48/1. | [1] | 146690-5900 | SHIM D17&5.2T2.2 |
48/1. | [1] | 146690-6000 | SHIM D17&5.2T2.3 |
48/1. | [1] | 146690-6100 | SHIM D17&5.2T2.4 |
48/1. | [1] | 146690-6200 | SHIM D17&5.2T2.5 |
48/1. | [1] | 146690-6300 | SHIM D17&5.2T2.6 |
48/1. | [1] | 146690-6400 | SHIM D17&5.2T2.7 |
48/1. | [1] | 146690-6500 | SHIM D17&5.2T2.8 |
48/1. | [1] | 146690-6600 | SHIM D17&5.2T2.9 |
48/1. | [1] | 146690-6700 | SHIM D17&5.2T3.0 |
48/1. | [1] | 146690-6800 | SHIM D17&5.2T3.1 |
48/1. | [1] | 146690-6900 | SHIM D17&5.2T3.2 |
48/1. | [1] | 146690-7000 | SHIM D17&5.2T3.3 |
48/1. | [1] | 146690-7100 | SHIM D17&5.2T3.4 |
48/1. | [1] | 146690-7200 | SHIM D17&5.2T0.4 |
48/1. | [1] | 146690-7300 | SHIM D17&5.2T0.6 |
48/1. | [1] | 146690-7400 | SHIM D17&5.2T0.7 |
48/1. | [1] | 146690-7500 | SHIM D17&5.2T1.9 |
48/1. | [1] | 146690-7800 | SHIM D17&5.2T0.2 |
49. | [2] | 146234-0500 | GUIDE PIN |
50. | [1] | 146401-0520 | HYDRAULIC HEAD |
50. | [1] | 146401-0520 | HYDRAULIC HEAD |
50. | [1] | 146401-0520 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [4] | 146430-0320 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0000 | COMPRESSION SPRING |
58. | [4] | 146440-0220 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146503-0521 | GOVERNOR COVER |
67/1. | [1] | 146508-2221 | GOVERNOR COVER |
67/13. | [1] | 146621-1700 | UNION NUT |
67/14. | [1] | 146621-1700 | UNION NUT |
67/15. | [1] | 146526-6400 | BLEEDER SCREW |
67/16. | [1] | 146526-3400 | BLEEDER SCREW |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3400 | THREADED PIN L53.00 |
67/201B. | [1] | 146545-3500 | THREADED PIN L55.00 |
67/201C. | [1] | 146545-3600 | THREADED PIN L57.00 |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146513-2020 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146537-4620 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 146621-2500 | UNION NUT |
95. | [1] | 146551-2420 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146975-2500 | SLIDING SLEEVE |
116. | [1] | 146576-0000 | SEALING CAP |
117/1. | [1] | 146577-0000 | PLUG L1.70 |
117/1. | [1] | 146577-0100 | PLUG L1.90 |
117/1. | [1] | 146577-0200 | PLUG L2.10 |
117/1. | [1] | 146577-0300 | PLUG L2.30 |
117/1. | [1] | 146577-0400 | PLUG L2.50 |
117/1. | [1] | 146577-0500 | PLUG L2.70 |
117/1. | [1] | 146577-0600 | PLUG L2.90 |
117/1. | [1] | 146577-0700 | PLUG L3.10 |
117/1. | [1] | 146577-0800 | PLUG L3.30 |
117/1. | [1] | 146577-0900 | PLUG L3.50 |
117/1. | [1] | 146577-1000 | PLUG L3.70 |
117/1. | [1] | 146577-1100 | PLUG L3.90 |
117/1. | [1] | 146577-1200 | PLUG L4.10 |
117/1. | [1] | 146577-1300 | PLUG L4.30 |
117/1. | [1] | 146577-1400 | PLUG L4.50 |
117/1. | [1] | 146577-1500 | PLUG L4.70 |
117/1. | [1] | 146577-1600 | PLUG L4.90 |
117/1. | [1] | 146577-1700 | PLUG L5.10 |
117/1. | [1] | 146577-5000 | PLUG L1.8 |
117/1. | [1] | 146577-5100 | PLUG L2.0 |
117/1. | [1] | 146577-5200 | PLUG L2.2 |
117/1. | [1] | 146577-5300 | PLUG L2.4 |
117/1. | [1] | 146577-5400 | PLUG L2.6 |
117/1. | [1] | 146577-5500 | PLUG L2.8 |
117/1. | [1] | 146577-5600 | PLUG L3.0 |
117/1. | [1] | 146577-5700 | PLUG L3.2 |
117/1. | [1] | 146577-5800 | PLUG L3.4 |
117/1. | [1] | 146577-5900 | PLUG L3.6 |
117/1. | [1] | 146577-6000 | PLUG L3.8 |
117/1. | [1] | 146577-6100 | PLUG L4.0 |
117/1. | [1] | 146577-6200 | PLUG L4.2 |
117/1. | [1] | 146577-6300 | PLUG L4.4 |
117/1. | [1] | 146577-6400 | PLUG L4.6 |
117/1. | [1] | 146577-6500 | PLUG L4.8 |
117/1. | [1] | 146577-6600 | PLUG L5.0 |
117/1. | [1] | 146877-0400 | PLUG |
117/1. | [1] | 146877-0500 | PLUG |
117/1. | [1] | 146877-0600 | PLUG |
117/1. | [1] | 146877-0700 | PLUG |
117/1. | [1] | 146877-4300 | PLUG |
117/1. | [1] | 146877-4400 | PLUG |
117/1. | [1] | 146877-4500 | PLUG |
117/1. | [1] | 146877-4600 | PLUG |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-0120 | OVER FLOW VALVE |
200. | [1] | 146206-0100 | COILED SPRING |
217. | [1] | 146541-3100 | SLOTTED WASHER |
218. | [1] | 146587-9900 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146587-8000 | COILED SPRING |
221. | [1] | 146629-3920 | BRACKET |
222. | [2] | 139006-4600 | BLEEDER SCREW |
223. | [1] | 146670-5520 | SWITCH |
230. | [1] | 146629-3520 | BRACKET |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-6720 | WIRE |
243. | [1] | 146621-1000 | UNION NUT |
246. | [1] | 027412-2440 | EYE BOLT |
310. | [1] | 146629-3620 | PLATE |
313. | [1] | 139006-4600 | BLEEDER SCREW |
329. | [1] | 146541-4900 | PLAIN WASHER D20&10T0.5 |
800S. | [1] | 146009-9520 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0900 | PACKING RING |
804S. | [1] | 146232-0220 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
821S. | [1] | 146210-5720 | ROLLER SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP L18 |
836S/1. | [1] | 146598-0700 | CAP L21 |
836S/1. | [1] | 146598-0800 | CAP L24 |
836S/1. | [1] | 146598-0900 | CAP L27 |
906. | [1] | 146901-7200 | NAMEPLATE |
Include in #2:
104740-9432
as INJECTION-PUMP ASSEMBLY
Cross reference number
Zexel num
Bosch num
Firm num
Name
104740-9432
9 460 613 634
NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD27 K
TD27 K
Information:
Responsibilities of the Oil Company
Performance - The performance of the oil is the responsibility of the oil company. The oil must maintain stable oil control and the oil must control deposits in the combustion chamber and in the crankcase. Engine service life must be maintained at the predicted stage for the particular engine application.Supply - The supply of the oil is the responsibility of the oil company. If special storage and/or shipping is required, the oil company should cover the cost of those items.Oil and fuel analysis - During the evaluation, the oil company should pay for the cost of the oil and fuel analyses. The oil samples should be analyzed by the local Cat dealer in the S O S Services program. The data that is obtained from the oil analyses must be plotted in order to establish trends. The fuel should be analyzed periodically by an independent laboratory. Results of the oil and fuel analyses must be sent to the engine owner. The owner should review the data. Also, the owner should be allowed to keep records of the data.Hardware - If the oil is evaluated in a used engine, two new sets of these components must be installed before the Field Performance Evaluation: pistons, piston rings and cylinder liners. The cost should be covered by the oil company. These new components will be examined as part of the final inspection.Final Inspection - The cost of the final inspection should be paid by the oil company. The costs of additional downtime can also be part of the cost of inspection. If the final inspection reveals severe deposits and/or damage to the hardware, the oil company must make the repairs that are necessary for restoring the engine to an acceptable condition.End of the Evaluation - After completion of the Field Performance Evaluation, the oil company should work with the engine owner in order to restore the engine to normal operation. If the Field Performance Evaluation is not completed, the same conditions should be applicable. The oil company should bear the cost of the restoration. The cost includes the removal of storage tanks, special piping, flow meters, and instrumentation.Final Report - the oil company must prepare a final report that documents the following items:
Initial oil consumption and final oil consumption
The data on oil consumption must be recorded on a minimum schedule of every week. A chart of the data must be included in the final report.
Results of oil analyses
Oil changes
Replacement of oil filters
Results of fuel analyses
Fuel consumption or power output
Average engine speed (rpm)
The typical duty cycle
Close up photographs of the following components from two cylinders must also be included: pistons, piston rings before removal and after removal, piston rings after removal, cylinder liners, crankcase, top deck of the cylinder head, bottom deck of the cylinder head, inlet valves and exhaust valves.The final report should be confidential. The final report should be made available to the engine owner.Responsibilities of the Engine Owner
Engine for the Evaluation - The owner must
Performance - The performance of the oil is the responsibility of the oil company. The oil must maintain stable oil control and the oil must control deposits in the combustion chamber and in the crankcase. Engine service life must be maintained at the predicted stage for the particular engine application.Supply - The supply of the oil is the responsibility of the oil company. If special storage and/or shipping is required, the oil company should cover the cost of those items.Oil and fuel analysis - During the evaluation, the oil company should pay for the cost of the oil and fuel analyses. The oil samples should be analyzed by the local Cat dealer in the S O S Services program. The data that is obtained from the oil analyses must be plotted in order to establish trends. The fuel should be analyzed periodically by an independent laboratory. Results of the oil and fuel analyses must be sent to the engine owner. The owner should review the data. Also, the owner should be allowed to keep records of the data.Hardware - If the oil is evaluated in a used engine, two new sets of these components must be installed before the Field Performance Evaluation: pistons, piston rings and cylinder liners. The cost should be covered by the oil company. These new components will be examined as part of the final inspection.Final Inspection - The cost of the final inspection should be paid by the oil company. The costs of additional downtime can also be part of the cost of inspection. If the final inspection reveals severe deposits and/or damage to the hardware, the oil company must make the repairs that are necessary for restoring the engine to an acceptable condition.End of the Evaluation - After completion of the Field Performance Evaluation, the oil company should work with the engine owner in order to restore the engine to normal operation. If the Field Performance Evaluation is not completed, the same conditions should be applicable. The oil company should bear the cost of the restoration. The cost includes the removal of storage tanks, special piping, flow meters, and instrumentation.Final Report - the oil company must prepare a final report that documents the following items:
Initial oil consumption and final oil consumption
The data on oil consumption must be recorded on a minimum schedule of every week. A chart of the data must be included in the final report.
Results of oil analyses
Oil changes
Replacement of oil filters
Results of fuel analyses
Fuel consumption or power output
Average engine speed (rpm)
The typical duty cycle
Close up photographs of the following components from two cylinders must also be included: pistons, piston rings before removal and after removal, piston rings after removal, cylinder liners, crankcase, top deck of the cylinder head, bottom deck of the cylinder head, inlet valves and exhaust valves.The final report should be confidential. The final report should be made available to the engine owner.Responsibilities of the Engine Owner
Engine for the Evaluation - The owner must
Have questions with 104740-9432?
Group cross 104740-9432 ZEXEL
Nissan-Diesel
Nissan-Diesel
104740-9432
9 460 613 634
INJECTION-PUMP ASSEMBLY
TD27
TD27