104740-8662 ZEXEL 9 460 614 322 BOSCH INJECTION-PUMP ASSEMBLY 9460614322 1047408662 me200887


 

Information injection-pump assembly

BOSCH 9 460 614 322 9460614322
ZEXEL 104740-8662 1047408662
MITSUBISHI ME200887 me200887
104740-8662 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 104740-8662 zexel genuine, new aftermarket engine parts with delivery

Cross reference number

Zexel num
Bosch num
Firm num
Name
104740-8662 
9 460 614 322 
ME200887  MITSUBISHI
INJECTION-PUMP ASSEMBLY
E65X NA K




Information:

The problems in this section are problems that do come about and are normally called "low power". These problems are not necessarily more common than engine problems, but they are possible problems which you need to read and check before an engine is disassembled.Read all of the items but make sure the first three are checked completely before making any engine test. Possible Causes/Corrections Tachometer ErrorTo check, connect a tachometer of known accuracy to the engine. Run the engine and make a comparison of the readings of the vehicle and test tachometers. If vehicle tachometer is defective, make repairs as necessary or install a new tachometer. Engine Operated At High AltitudeLess oxygen at higher altitudes causes the engine horsepower to go down. There is no effect on the horsepower of the engine for the first 2280 m (7500 ft) above sea level of operation. Brakes Do Not Completely ReleaseCheck the brakes by feeling all the brake drums. If the brakes of a wheel do not completely release, the brake drum for that wheel will be hotter than the brake drums for the other wheels. With the truck lifted with a jack, the wheels must have free rotation when turned by hand. Extra Engine Driven EquipmentAir compressors, hydraulic pumps, alternator, and other engine driven equipment that has damage, or that was not installed correctly, or that is not in correct adjustment, can take more horsepower to drive than expected. If necessary, disconnect the equipment and test the engine. Speedometer ErrorA defective speedometer does not give the correct speed or the correct indication of fuel consumption. An indication of low speed can cause the operator to feel that he has a power problem. Speeds Too HighThe need for more horsepower is easy to see as the speed of the vehicle is increased. This is especially true if the front of the vehicle has a large surface area. Application personnel can give you the horsepower necessary for different vehicle designs at different speeds. Overload On VehicleApplication personnel can give you the horsepower needs for different vehicles. High Moving ResistanceSoft ground conditions cause a need for more horsepower. To see if the problem is the engine, test the vehicle on a surface known to be good, or test on a chassis dynamometer. High Wind ResistanceThe horsepower needs for a truck can be divided into two parts. Part of the horsepower is used to move the vehicle and part is used to get through the resistance of the wind. The horsepower necessary to get through the resistance of the wind will increase as the vehicle is used at higher speeds. Vehicles with a large front area have a higher wind resistance and take more horsepower than those with a small front area. Some types of trucks, for example those used for the transportation of automobiles and or boats have high wind resistance even if the front area is small. Moving against the wind has the same effect on wind resistance as does higher

Have questions with 104740-8662?





Group cross 104740-8662 ZEXEL

9 460 612 727 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 610 934 
MD192504 
INJECTION-PUMP ASSEMBLY
4D56
9 460 611 350 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 614 321 
MD192064 
INJECTION-PUMP ASSEMBLY
4D56
9 460 613 189 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 610 935 
MD193837 
INJECTION-PUMP ASSEMBLY
4D56
9 460 612 728 
MD196208 
INJECTION-PUMP ASSEMBLY
4D56
9 460 612 729 
MD196209 
INJECTION-PUMP ASSEMBLY
4D56
9 460 612 730 
MD196210 
INJECTION-PUMP ASSEMBLY
4D56
 
ME200202 
INJECTION-PUMP ASSEMBLY
E65X NA
9 460 612 731 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

104740-8662  
9 460 614 322 
ME200887 
INJECTION-PUMP ASSEMBLY
E65X NA
 
ME200526 
INJECTION-PUMP ASSEMBLY
E65X NA
9 460 610 775 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 614 323 
ME200888 
INJECTION-PUMP ASSEMBLY
E65X NA
9 460 612 732 
 
INJECTION-PUMP ASSEMBLY
9 460 611 855 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 611 593 
MD302863 
INJECTION-PUMP ASSEMBLY
4D56
Back to top