Fuel injectors
  1. Home
  2. injection
  3. #1047407104

104740-7104 ZEXEL 9 460 612 876 BOSCH INJECTION-PUMP ASSEMBLY 9460612876 1047407104 1670080g16


 

Information injection-pump assembly

BOSCH 9 460 612 876 9460612876
ZEXEL 104740-7104 1047407104
NISSAN 1670080G16 1670080g16
104740-7104 INJECTION-PUMP ASSEMBLY
Rating:
85
Buy INJECTION-PUMP ASSEMBLY 104740-7104 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104740-7104
1. _
2. FUEL INJECTION PUMP 104640-7104
3. NUMBER PLATE 146953-6200
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1121
8. Nozzle and Holder 16600-43G03
9. Open Pre:MPa(Kqf/cm2) 9.8{100}
10. NOZZLE-HOLDER 105078-0050
11. NOZZLE 105007-1130

Scheme ###:

PACKING RING
1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0420 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-2320 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2120 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6120 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-3400 COMPRESSION SPRING
34B. [1] 146312-2200 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
49. [2] 146234-0500 GUIDE PIN
50. [1] 146401-2620 HYDRAULIC HEAD
50. [1] 146401-2620 HYDRAULIC HEAD
50. [1] 146401-2620 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
54. [4] 146433-0100 GASKET
55. [4] 146430-2920 DELIVERY-VALVE ASSEMBLY VE29
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
67. [1] 146701-1021 MANIFOLD-PRESSURE COMP.
67/1. [1] 146805-3620 GOVERNOR COVER
67/2. [1] 146515-0320 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [1] 139310-0200 PLAIN WASHER
67/5. [1] 146536-5321 CONTROL LEVER
67/5B. [1] 146536-5421 CONTROL LEVER
67/5C. [1] 146830-6721 CONTROL LEVER
67/5D. [1] 146830-6821 CONTROL LEVER
67/6. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/7. [1] 146621-0700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-3000 BLEEDER SCREW
67/18. [1] 146592-1800 COILED SPRING
67/19. [1] 146541-3000 BUSHING
67/21. [1] 146587-0800 COILED SPRING
67/22. [1] 146541-3100 SLOTTED WASHER
67/31. [1] 146710-0800 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-0700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-0100 BUSHING
67/38. [1] 139506-0200 GASKET
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET
67/41. [1] 146713-4100 ADJUSTING PIN
67/42. [2] 146714-0000 PLATE
67/43. [1] 146715-0000 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-1400 COILED SPRING
67/48/1. [1] 146720-0200 SPACER BUSHING L4.1
67/48/1. [1] 146720-0300 SPACER BUSHING L4.3
67/48/1. [1] 146720-0400 SPACER BUSHING L4.5
67/48/1. [1] 146720-0500 SPACER BUSHING L4.7
67/48/1. [1] 146720-0600 SPACER BUSHING L4.9
67/48/1. [1] 146720-0700 SPACER BUSHING L5.1
67/48/1. [1] 146720-2000 SPACER BUSHING L4.0
67/48/1. [1] 146720-2100 SPACER BUSHING L4.2
67/48/1. [1] 146720-2200 SPACER BUSHING L4.4
67/48/1. [1] 146720-2300 SPACER BUSHING L4.6
67/48/1. [1] 146720-2400 SPACER BUSHING L4.8
67/48/1. [1] 146720-2500 SPACER BUSHING L5.0
67/48/1. [1] 146720-2600 SPACER BUSHING L5.2
67/49. [1] 146721-2520 COVER
67/54. [2] 139006-4600 BLEEDER SCREW
67/55. [2] 139006-4500 BLEEDER SCREW
67/56. [1] 146723-0300 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/64. [1] 146927-2300 BRACKET
67/78. [1] 146600-4400 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
95. [1] 146551-6920 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146975-4200 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-0800 PLUG L3.30
117/1. [1] 146577-0900 PLUG L3.50
117/1. [1] 146577-1000 PLUG L3.70
117/1. [1] 146577-1100 PLUG L3.90
117/1. [1] 146577-1200 PLUG L4.10
117/1. [1] 146577-1300 PLUG L4.30
117/1. [1] 146577-1400 PLUG L4.50
117/1. [1] 146577-1500 PLUG L4.70
117/1. [1] 146577-5700 PLUG L3.2
117/1. [1] 146577-5800 PLUG L3.4
117/1. [1] 146577-5900 PLUG L3.6
117/1. [1] 146577-6000 PLUG L3.8
117/1. [1] 146577-6100 PLUG L4.0
117/1. [1] 146577-6200 PLUG L4.2
117/1. [1] 146577-6300 PLUG L4.4
117/1. [1] 146577-6400 PLUG L4.6
117/1. [1] 146577-6500 PLUG L4.8
120. [1] 146579-6020 RETAINING PIN
122. [1] 146580-0400 GOVERNOR SPRING
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0520 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0120 OVER FLOW VALVE
200. [1] 146206-0100 COILED SPRING
221. [1] 146927-2620 BRACKET
222. [2] 139006-4600 BLEEDER SCREW
224. [1] 146927-2700 BRACKET
230. [1] 146926-4220 BRACKET
231. [1] 139006-4600 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-1220 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146658-6120 WIRE
243. [1] 146621-1000 UNION NUT
244. [1] 020118-1440 BLEEDER SCREW
245. [2] 139512-0500 GASKET
246. [1] 027412-2440 EYE BOLT
247. [1] 146608-3320 PIPE
251. [1] 014010-8140 PLAIN WASHER
309. [1] 020146-1270 BLEEDER SCREW
310. [1] 146683-4821 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146620-1500 FLAT-HEAD SCREW
310/4. [1] 013020-6040 UNION NUT
310/5. [1] 146614-2300 JOINT CONNECTION
310/6. [1] 146661-0401 BOOT
800S. [1] 146019-4420 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
812S. [1] 146600-1920 PARTS SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
847S. [1] 146684-1010 POTENTCIOMETER
906. [1] 146953-6200 NAMEPLATE
910. [1] 146709-0121 MANIFOLD-PRESSURE COMP.
910/1. [1] 146701-1021 MANIFOLD-PRESSURE COMP.
910/1/1. [1] 146805-3620 GOVERNOR COVER
910/1/2. [1] 146515-0320 CONTROL SHAFT
910/1/3. [1] 146600-0100 O-RING
910/1/4. [1] 139310-0200 PLAIN WASHER
910/1/5. [1] 146536-5321 CONTROL LEVER
910/1/5B. [1] 146536-5421 CONTROL LEVER
910/1/5C. [1] 146830-6721 CONTROL LEVER
910/1/5D. [1] 146830-6821 CONTROL LEVER
910/1/6. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
910/1/7. [1] 146621-0700 UNION NUT
910/1/14. [1] 146621-1700 UNION NUT
910/1/16. [1] 146526-3000 BLEEDER SCREW
910/1/18. [1] 146592-1800 COILED SPRING
910/1/19. [1] 146541-3000 BUSHING
910/1/21. [1] 146587-0800 COILED SPRING
910/1/22. [1] 146541-3100 SLOTTED WASHER
910/1/31. [1] 146710-0800 BUSHING
910/1/32. [1] 146711-0000 PLATE
910/1/33. [1] 139218-0400 UNION NUT
910/1/34. [1] 146712-0700 BEARING PIN
910/1/35. [1] 146621-0300 UNION NUT
910/1/36. [1] 146600-1400 O-RING
910/1/37. [1] 146710-0100 BUSHING
910/1/38. [1] 139506-0200 GASKET
910/1/39. [1] 146620-0300 CAPSULE
910/1/40. [1] 026512-1540 GASKET
910/1/41. [1] 146713-4100 ADJUSTING PIN
910/1/42. [2] 146714-0000 PLATE
910/1/43. [1] 146715-0000 DIAPHRAGM
910/1/44. [1] 139306-0100 LOCKING WASHER
910/1/45. [1] 013030-6040 UNION NUT
910/1/46. [1] 146716-0000 UNION NUT
910/1/47. [1] 146717-1400 COILED SPRING
910/1/48/1. [1] 146720-0000 SPACER BUSHING L3.7
910/1/48/1. [1] 146720-0100 SPACER BUSHING L3.9
910/1/48/1. [1] 146720-0200 SPACER BUSHING L4.1
910/1/48/1. [1] 146720-0300 SPACER BUSHING L4.3
910/1/48/1. [1] 146720-0400 SPACER BUSHING L4.5
910/1/48/1. [1] 146720-0500 SPACER BUSHING L4.7
910/1/48/1. [1] 146720-0600 SPACER BUSHING L4.9
910/1/48/1. [1] 146720-0700 SPACER BUSHING L5.1
910/1/48/1. [1] 146720-0800 SPACER BUSHING L5.3
910/1/48/1. [1] 146720-0900 SPACER BUSHING L2.7
910/1/48/1. [1] 146720-1000 SPACER BUSHING L2.9
910/1/48/1. [1] 146720-1100 SPACER BUSHING L3.1
910/1/48/1. [1] 146720-1200 SPACER BUSHING L3.3
910/1/48/1. [1] 146720-1300 SPACER BUSHING L3.5
910/1/48/1. [1] 146720-1400 SPACER BUSHING L2.8
910/1/48/1. [1] 146720-1500 SPACER BUSHING L3.0
910/1/48/1. [1] 146720-1600 SPACER BUSHING L3.2
910/1/48/1. [1] 146720-1700 SPACER BUSHING L3.4
910/1/48/1. [1] 146720-1800 SPACER BUSHING L3.6
910/1/48/1. [1] 146720-1900 SPACER BUSHING L3.8
910/1/48/1. [1] 146720-2000 SPACER BUSHING L4.0
910/1/48/1. [1] 146720-2100 SPACER BUSHING L4.2
910/1/48/1. [1] 146720-2200 SPACER BUSHING L4.4
910/1/48/1. [1] 146720-2300 SPACER BUSHING L4.6
910/1/48/1. [1] 146720-2400 SPACER BUSHING L4.8
910/1/48/1. [1] 146720-2500 SPACER BUSHING L5.0
910/1/48/1. [1] 146720-2600 SPACER BUSHING L5.2
910/1/48/1. [1] 146720-2700 SPACER BUSHING L5.4
910/1/48/1. [1] 146720-2800 SPACER BUSHING L5.5
910/1/48/1. [1] 146720-2900 SPACER BUSHING L5.6
910/1/48/1. [1] 146720-4500 SPACER BUSHING L1.8
910/1/48/1. [1] 146720-4600 SPACER BUSHING L1.9
910/1/48/1. [1] 146720-4700 SPACER BUSHING L2.0
910/1/48/1. [1] 146720-4800 SPACER BUSHING L2.1
910/1/48/1. [1] 146720-4900 SPACER BUSHING L2.2
910/1/48/1. [1] 146720-5000 SPACER BUSHING L2.3
910/1/48/1. [1] 146720-5100 SPACER BUSHING L2.4
910/1/48/1. [1] 146720-5200 SPACER BUSHING L2.5
910/1/48/1. [1] 146720-5300 SPACER BUSHING L2.6
910/1/48/1. [1] 146725-2500 SPACER BUSHING L5.7
910/1/48/1. [1] 146725-2600 SPACER BUSHING L5.8
910/1/48/1. [1] 146725-2700 SPACER BUSHING L5.9
910/1/48/1. [1] 146725-2800 SPACER BUSHING L6.0
910/1/48/1. [1] 146725-2900 SPACER BUSHING L6.1
910/1/48/1. [1] 146725-3000 SPACER BUSHING L6.2
910/1/48/1. [1] 146725-3100 SPACER BUSHING L6.3
910/1/48/1. [1] 146725-3200 SPACER BUSHING L6.4
910/1/48/1. [1] 146725-3300 SPACER BUSHING L6.5
910/1/48/1. [1] 146725-3400 SPACER BUSHING L6.6
910/1/48/1. [1] 146725-3500 SPACER BUSHING L6.7
910/1/48/1. [1] 146725-3600 SPACER BUSHING L6.8
910/1/48/1. [1] 146725-3700 SPACER BUSHING L6.9
910/1/48/1. [1] 146725-3800 SPACER BUSHING L7.0
910/1/48/1. [1] 146725-3900 SPACER BUSHING L7.1
910/1/48/1. [1] 146725-4000 SPACER BUSHING L7.2
910/1/48/1. [1] 146725-4100 SPACER BUSHING L7.3
910/1/48/1. [1] 146725-4200 SPACER BUSHING L7.4
910/1/48/1. [1] 146725-4300 SPACER BUSHING L7.5
910/1/49. [1] 146721-2520 COVER
910/1/54. [2] 139006-4600 BLEEDER SCREW
910/1/55. [2] 139006-4500 BLEEDER SCREW
910/1/56. [1] 146723-0300 CONTROL LEVER
910/1/57. [1] 146712-0100 BEARING PIN
910/1/58. [2] 146620-0600 CAPSULE
910/1/59. [2] 026506-1040 GASKET
910/1/60. [1] 146724-0300 ELEMENT
910/1/61. [1] 146724-0600 CAPSULE
910/1/64. [1] 146927-2300 BRACKET
910/1/78. [1] 146600-4400 SEAL RING
910/1/200. [1] 139308-0300 PLAIN WASHER
910/1/201. [1] 146545-3400 THREADED PIN L53.00
910/1/201B. [1] 146545-3500 THREADED PIN L55.00
910/1/201C. [1] 146545-3600 THREADED PIN L57.00
910/1/202. [1] 139208-0900 UNION NUT
910/1/203. [1] 146600-1200 O-RING
910/221. [1] 146927-2620 BRACKET
910/222. [2] 139006-4600 BLEEDER SCREW

Include in #2:

104740-7104 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104740-7104 
9 460 612 876 
1670080G16  NISSAN
INJECTION-PUMP ASSEMBLY
TD27-T K 11CJ INJECTION PUMP ASSY VE4 VE
104740-7104 
9 460 612 876 
1670080G16  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD27-T K 11CJ INJECTION PUMP ASSY VE4 VE




Information:


Stopping the engine immediately after it has been working under load can result in overheating and accelerated wear of the engine components. Allow the engine to cool down before stopping. Avoiding hot engine shutdowns will maximize turbocharger shaft and bearing life.
Emergency Stopping
Emergency shutoff controls are for EMERGENCY use ONLY. DO NOT use Emergency shutoff devices or controls for normal stopping procedure.
Make sure that any external system components that have been operating to support engine operation are secured after any stop.Emergency Stop Buttons
Emergency Stop Button, shown mounted on a junction box.Emergency stops may be made by pushing the Emergency Stop Button located on the junction box (if equipped). Both the Button and the air inlet shutoff (if equipped) require resetting before the engine will start.Manual Stopping
A manual shutoff shaft is provided to override the governor control. The shaft will move the fuel control linkage to the FUEL OFF position. Refer to the Model Views for the engine location of the shaft. The engine may be stopped by using the shaft and the Woodward Actuator (if equipped) or the Mechanical Governor (if equipped).
Typical Woodward Actuator Control Lever.If equipped with a Woodward Actuator, move the control lever to the FUEL OFF position.
Typical Mechanical Governor ControlIf equipped with a Mechanical Governor Control, move the control to the FUEL OFF position.Hold the lever at the FUEL OFF position until the engine stops.Air Shutoff (If Equipped)
Some engines are equipped with an air shutoff, located between the aftercooler and the turbocharger. If equipped with an air shutoff lever, move the lever to the OFF position.Manual Stop Procedure
There may be several ways to shut off your engine. Make sure the shutoff procedures are understood. Use the following general guidelines for stopping the engine.1. Disengage any driven equipment or remove the load from engine.2. Allow the engine to run at rated speed for five minutes.3. Run the engine at 1/2 rated speed for two to three minutes.4. Reduce the engine speed to low idle for 30 seconds.Check the crankcase oil level during the engine idle. Read the LOW IDLE side of the dipstick. Maintain the oil level between the ADD and FULL marks.5. Shut the engine off by turning the start/stop switch to the stop or off position.After Stopping the Engine
* Check the crankcase oil level. Maintain the oil level between the ADD and FULL marks in the FULL RANGE zone on the dipstick.* Repair any leaks, perform minor adjustments, tighten loose bolts, etc.* Note the service hour meter reading. Perform periodic maintenance as instructed in the Maintenance Schedule.* Fill the fuel tank to prevent accumulation of moisture in the fuel. Do not overfill.
Only use antifreeze/coolant mixtures recommended in the Cooling System Specifications of this manual. Failure to do so can cause engine damage.
* Allow the radiator and engine jacket water system to cool. Check the coolant level. Maintain the cooling system to 13 mm (1/2 inch) from bottom of the fill pipe.If freezing temperatures are expected, check the coolant for proper antifreeze protection. The cooling system

Have questions with 104740-7104?





Group cross 104740-7104 ZEXEL

Nissan-Diesel 

104740-7100  

104740-7104 
 
1670080G00 
INJECTION-PUMP ASSEMBLY
TD27T
104740-7102  

104740-7103 
9 460 612 874 
 
INJECTION-PUMP ASSEMBLY

Nissan 

104740-7103  

104740-7104 
9 460 612 875 
1670080G06 
INJECTION-PUMP ASSEMBLY
TD27-T

Nissan-Diesel 

104740-7103  

104740-7104 
9 460 612 875 
1670080G06 
INJECTION-PUMP ASSEMBLY
TD27-T

Nissan 

104740-7104  
9 460 612 876 
1670080G16 
INJECTION-PUMP ASSEMBLY
TD27-T

Nissan-Diesel 

104740-7104  
9 460 612 876 
1670080G16 
INJECTION-PUMP ASSEMBLY
TD27-T
Back to top