104740-3700 ZEXEL 9 460 610 236 BOSCH INJECTION-PUMP ASSEMBLY 9460610236 1047403700

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 460 610 236 9460610236

ZEXEL 104740-3700 1047403700

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104740-3700 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104740-3700
1.	_
2.	FUEL INJECTION PUMP	104640-3390
3.	NUMBER PLATE	146643-6600
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105148-1112
8.	Nozzle and Holder	MD103301
9.	Open Pre:MPa(Kqf/cm2)	11.8{120}
10.	NOZZLE-HOLDER	105078-0012
11.	NOZZLE	105007-1120

Scheme ###:

1/6.	[1]	146601-0300	PACKING RING
1/8.	[1]	146616-4700	ADAPTOR
1/9.	[1]	146616-5600	ADAPTOR
1/10.	[1]	026512-1840	GASKET
6.	[1]	146100-0120	SUPPLY PUMP D20
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0001	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-0120	ROLLER SET MMC C
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0020	CAM PLATE '00'S
30.	[1]	146600-0800	O-RING
31.	[1]	146300-2400	PUMP PLUNGER ' 24'
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-0300	COMPRESSION SPRING K=2.8
35/1.	[1]	146603-0700	SHIM
35/1.	[1]	146603-0800	SHIM
35/1.	[1]	146603-0900	SHIM
35/1.	[1]	146603-1000	SHIM
35/1.	[1]	146603-1100	SHIM
35/1.	[1]	146603-3600	SHIM
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0000	COVER
38.	[2]	139106-0000	FLAT-HEAD SCREW
39.	[1]	146310-0100	COVER
40.	[2]	139106-0000	FLAT-HEAD SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0000	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM
48/1.	[1]	146603-0100	SHIM
48/1.	[1]	146603-0200	SHIM
48/1.	[1]	146603-0300	SHIM
48/1.	[1]	146603-0400	SHIM
48/1.	[1]	146603-0500	SHIM
48/1.	[1]	146603-0600	SHIM
48/1.	[1]	146690-1400	SHIM
48/1.	[1]	146690-1500	SHIM
48/1.	[1]	146690-1600	SHIM
48/1.	[1]	146690-1700	SHIM
48/1.	[1]	146690-1800	SHIM
48/1.	[1]	146690-1900	SHIM
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146400-2220	HYDRAULIC HEAD D10 2
50.	[1]	146400-2220	HYDRAULIC HEAD D10 2
50.	[1]	146400-2220	HYDRAULIC HEAD D10 2
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM
52/1.	[1]	146420-0100	SHIM
52/1.	[1]	146420-0200	SHIM
52/1.	[1]	146420-0300	SHIM
52/1.	[1]	146420-0400	SHIM
52/1.	[1]	146420-0500	SHIM
52/1.	[1]	146420-0600	SHIM
52/1.	[1]	146420-0700	SHIM
52/1.	[1]	146420-0800	SHIM
52/1.	[1]	146420-0900	SHIM
52/1.	[1]	146420-1000	SHIM
52/1.	[1]	146420-1100	SHIM
52/1.	[1]	146420-1200	SHIM
52/1.	[1]	146420-1300	SHIM
52/1.	[1]	146420-1400	SHIM
52/1.	[1]	146420-1500	SHIM
52/1.	[1]	146420-1600	SHIM
52/1.	[1]	146420-1700	SHIM
52/1.	[1]	146420-1800	SHIM
52/1.	[1]	146420-1900	SHIM
52/1.	[1]	146420-2000	SHIM
52/1.	[1]	146420-2100	SHIM
52/1.	[1]	146420-2200	SHIM
52/1.	[1]	146420-2300	SHIM
52/1.	[1]	146420-2400	SHIM
52/1.	[1]	146420-2500	SHIM
52/1.	[1]	146420-2600	SHIM
52/1.	[1]	146420-2700	SHIM
52/1.	[1]	146420-2800	SHIM
52/1.	[1]	146420-2900	SHIM
52/1.	[1]	146420-3000	SHIM
52/1.	[1]	146420-3100	SHIM
52/1.	[1]	146420-3200	SHIM
52/1.	[1]	146420-3300	SHIM
52/1.	[1]	146420-3400	SHIM
52/1.	[1]	146420-3500	SHIM
52/1.	[1]	146420-3600	SHIM
52/1.	[1]	146420-3700	SHIM
52/1.	[1]	146420-3800	SHIM
52/1.	[1]	146420-3900	SHIM
52/1.	[1]	146420-4000	SHIM
52/1.	[1]	146420-4100	SHIM
52/1.	[1]	146420-4200	SHIM
52/1.	[1]	146420-4300	SHIM
52/1.	[1]	146420-4400	SHIM
52/1.	[1]	146420-4500	SHIM
52/1.	[1]	146420-4600	SHIM
52/1.	[1]	146420-4700	SHIM
52/1.	[1]	146420-4800	SHIM
52/1.	[1]	146420-4900	SHIM
52/1.	[1]	146420-5000	SHIM
52/1.	[1]	146420-5100	SHIM
52/1.	[1]	146420-5200	SHIM
52/1.	[1]	146420-5300	SHIM
52/1.	[1]	146420-5400	SHIM
52/1.	[1]	146420-5500	SHIM
52/1.	[1]	146420-5600	SHIM
52/1.	[1]	146420-5700	SHIM
52/1.	[1]	146420-5800	SHIM
54.	[4]	146433-0100	GASKET
55.	[4]	146430-2120	DELIVERY-VALVE ASSEMBLY 'VE21
56.	[4]	146432-0000	COMPRESSION SPRING K=0.4
58.	[4]	146440-0320	FITTING D0.40
60.	[4]	139106-0100	FLAT-HEAD SCREW
60.	[4]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146700-3420	MANIFOLD-PRESSURE COMP.
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1800	UNION NUT
67/15.	[1]	146526-3000	BLEEDER SCREW
67/16.	[1]	146526-3500	BLEEDER SCREW
67/31.	[1]	146710-0000	BUSHING
67/32.	[1]	146711-0000	PLATE
67/33.	[1]	139218-0400	UNION NUT
67/34.	[1]	146712-0700	BEARING PIN 15.5
67/35.	[1]	146621-0300	UNION NUT
67/36.	[1]	146600-1400	O-RING
67/37.	[1]	146710-0100	BUSHING
67/38.	[1]	139506-0200	GASKET
67/39.	[1]	146620-0300	CAPSULE
67/40.	[1]	026512-1540	GASKET
67/41.	[1]	146713-0400	ADJUSTING PIN
67/42.	[2]	146714-0000	PLATE
67/43.	[1]	146715-0000	DIAPHRAGM
67/44.	[1]	139306-0100	LOCKING WASHER
67/45.	[1]	013030-6040	UNION NUT
67/46.	[1]	146716-0000	UNION NUT
67/47.	[1]	146717-0400	COILED SPRING K=1.8
67/48/1.	[1]	146720-0000	SPACER BUSHING
67/48/1.	[1]	146720-0100	SPACER BUSHING
67/48/1.	[1]	146720-0200	SPACER BUSHING
67/48/1.	[1]	146720-0300	SPACER BUSHING
67/48/1.	[1]	146720-0400	SPACER BUSHING
67/48/1.	[1]	146720-0500	SPACER BUSHING
67/48/1.	[1]	146720-0600	SPACER BUSHING
67/48/1.	[1]	146720-0700	SPACER BUSHING
67/48/1.	[1]	146720-0800	SPACER BUSHING
67/48/1.	[1]	146720-0900	SPACER BUSHING
67/48/1.	[1]	146720-1000	SPACER BUSHING
67/48/1.	[1]	146720-1100	SPACER BUSHING
67/48/1.	[1]	146720-1200	SPACER BUSHING
67/48/1.	[1]	146720-1300	SPACER BUSHING
67/48/1.	[1]	146720-1400	SPACER BUSHING
67/48/1.	[1]	146720-1500	SPACER BUSHING
67/48/1.	[1]	146720-1600	SPACER BUSHING
67/48/1.	[1]	146720-1700	SPACER BUSHING
67/48/1.	[1]	146720-1800	SPACER BUSHING
67/48/1.	[1]	146720-1900	SPACER BUSHING
67/48/1.	[1]	146720-2000	SPACER BUSHING
67/48/1.	[1]	146720-2100	SPACER BUSHING
67/48/1.	[1]	146720-2200	SPACER BUSHING
67/48/1.	[1]	146720-2300	SPACER BUSHING
67/48/1.	[1]	146720-2400	SPACER BUSHING
67/48/1.	[1]	146720-2500	SPACER BUSHING
67/48/1.	[1]	146720-2600	SPACER BUSHING
67/48/1.	[1]	146720-2700	SPACER BUSHING
67/48/1.	[1]	146720-2800	SPACER BUSHING
67/48/1.	[1]	146720-2900	SPACER BUSHING
67/48/1.	[1]	146720-4500	SPACER BUSHING BCS L
67/48/1.	[1]	146720-4600	SPACER BUSHING BCS L
67/48/1.	[1]	146720-4700	SPACER BUSHING BCS L
67/48/1.	[1]	146720-4800	SPACER BUSHING BCS L
67/48/1.	[1]	146720-4900	SPACER BUSHING BCS L
67/48/1.	[1]	146720-5000	SPACER BUSHING BCS L
67/48/1.	[1]	146720-5100	SPACER BUSHING BCS L
67/48/1.	[1]	146720-5200	SPACER BUSHING BCS L
67/48/1.	[1]	146720-5300	SPACER BUSHING BCS L
67/49.	[1]	146721-0820	COVER
67/54.	[4]	020006-1440	BLEEDER SCREW
67/56.	[1]	146723-0020	CONTROL LEVER
67/57.	[1]	146712-0100	BEARING PIN
67/58.	[2]	146620-0600	CAPSULE
67/59.	[2]	026506-1040	GASKET
67/60.	[1]	146724-0020	AIR FILTER
67/78.	[1]	146600-1000	SEAL RING
67/95.	[1]	146629-2021	BRACKET
68.	[1]	146513-1420	CONTROL SHAFT R=10
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146535-4900	CONTROL LEVER
72B.	[1]	146535-5000	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER
75.	[1]	013020-6040	UNION NUT
87.	[1]	139308-0300	PLAIN WASHER
88.	[1]	146545-0300	THREADED PIN
88B.	[1]	146545-0400	THREADED PIN
88C.	[1]	146545-0500	THREADED PIN
90.	[1]	139208-0100	UNION NUT
91.	[1]	146600-1200	O-RING
95.	[1]	146551-6320	FULCRUM LEVER I=2.2
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET
106.	[2]	146588-0000	COILED SPRING
107.	[1]	146569-0100	UNION NUT
108.	[1]	146570-0320	GOVERNOR SHAFT L-L/T
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM
110/1.	[1]	146571-0100	SHIM
110/1.	[1]	146571-0200	SHIM
110/1.	[1]	146571-0300	SHIM
110/1.	[1]	146571-0400	SHIM
110/1.	[1]	146571-0500	SHIM
110/1.	[1]	146571-0600	SHIM
110/1.	[1]	146571-0700	SHIM
110/1.	[1]	146571-0800	SHIM
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-2500	SLIDING SLEEVE '25'
116.	[1]	146576-0000	SEALING CAP
117/1.	[1]	146577-1800	PLUG
117/1.	[1]	146577-1900	PLUG
117/1.	[1]	146577-2000	PLUG
117/1.	[1]	146577-2100	PLUG
117/1.	[1]	146577-2200	PLUG
117/1.	[1]	146577-2300	PLUG
117/1.	[1]	146577-2400	PLUG
117/1.	[1]	146577-2500	PLUG
117/1.	[1]	146577-2600	PLUG
117/1.	[1]	146577-2700	PLUG
117/1.	[1]	146577-2800	PLUG
117/1.	[1]	146577-2900	PLUG
117/1.	[1]	146577-3000	PLUG
117/1.	[1]	146577-3100	PLUG
117/1.	[1]	146577-3200	PLUG
117/1.	[1]	146577-3300	PLUG
117/1.	[1]	146577-6700	PLUG
117/1.	[1]	146577-6800	PLUG
117/1.	[1]	146577-6900	PLUG
117/1.	[1]	146577-7000	PLUG
117/1.	[1]	146577-7100	PLUG
117/1.	[1]	146577-7200	PLUG
117/1.	[1]	146577-7300	PLUG
117/1.	[1]	146577-7400	PLUG
117/1.	[1]	146577-7500	PLUG
117/1.	[1]	146577-7600	PLUG
117/1.	[1]	146577-7700	PLUG
117/1.	[1]	146577-7800	PLUG
117/1.	[1]	146577-7900	PLUG
117/1.	[1]	146577-8000	PLUG
117/1.	[1]	146577-8100	PLUG
123.	[4]	146620-0500	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-0020	CAPSULE D14
130/2.	[1]	026508-1140	GASKET
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE '02'4
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0020	OVER FLOW VALVE
137.	[2]	026512-1840	GASKET
138.	[1]	146605-8420	INLET UNION OUT B
200.	[1]	146206-0100	COILED SPRING
220.	[1]	146587-1500	COILED SPRING
224.	[1]	020106-2040	BLEEDER SCREW
230.	[1]	146629-2120	BRACKET
231.	[1]	020106-1240	BLEEDER SCREW
233.	[1]	146658-2920	WIRE ' 29'
235.	[1]	146659-0600	CLAMPING BAND ܲԸ
239.	[1]	023500-5140	PLAIN WASHER
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
243.	[1]	013020-5240	UNION NUT
245.	[2]	026512-1840	GASKET
246.	[1]	027412-2440	EYE BOLT
247.	[1]	146605-8520	INLET UNION IN B
275.	[1]	146612-4800	BRACKET
276.	[2]	010010-1640	BLEEDER SCREW
277.	[2]	014111-0440	LOCKING WASHER
800S.	[1]	146019-2520	PUMP HOUSING 4D56
800S/1/6.	[1]	146601-0300	PACKING RING
800S/1/8.	[1]	146616-4700	ADAPTOR
800S/1/9.	[1]	146616-5600	ADAPTOR
800S/1/10.	[1]	026512-1840	GASKET
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
903.	[1]	146620-0120	CAPSULE
903/2.	[1]	146600-1300	O-RING
906.	[1]	146643-6600	NUMBER PLATE
907.	[1]	025804-1610	WOODRUFF KEY

Include in #2:

104740-3700 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 610 236 9460610236

ZEXEL 104740-3700 1047403700

Zexel num

Bosch num

Firm num

Name

104740-3700
104740-3703

9 460 610 236

MITSUBISHI

INJECTION-PUMP ASSEMBLY
4D56 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 59.9 59.4 60.4

Difference in delivery mm3/st. 4.5

Basic *

Injection timing adjustment_02

Pump speed r/min 750 750 750

Boost pressure kPa 44 42.7 45.3

Boost pressure mmHg 330 320 340

Average injection quantity mm3/st. 58.9 58.4 59.4

Basic *

Injection timing adjustment_03

Pump speed r/min 2650 2650 2650

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 25.2 20.2 30.2

Injection timing adjustment_04

Pump speed r/min 2100 2100 2100

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 53.3 50.8 55.8

Injection timing adjustment_05

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 59.9 58.9 60.9

Injection timing adjustment_06

Pump speed r/min 750 750 750

Boost pressure kPa 44 42.7 45.3

Boost pressure mmHg 330 320 340

Average injection quantity mm3/st. 58.9 57.9 59.9

Injection timing adjustment_07

Pump speed r/min 600 600 600

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 46.3 43.8 48.8

Injection quantity adjustment

Pump speed r/min 2650 2650 2650

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 25.2 22.2 28.2

Difference in delivery mm3/st. 5.5

Basic *

Injection quantity adjustment_02

Pump speed r/min 3050 3050 3050

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 5

Governor adjustment

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 8 6.5 9.5

Difference in delivery mm3/st. 2

Basic *

Governor adjustment_02

Pump speed r/min 600 600 600

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 3

Governor adjustment_03

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 8 6 10

Timer adjustment

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 73 63 83

Basic *

Speed control lever angle

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

0000000901

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Overflow quantity cm3/min 420 288 552

Stop lever angle

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Pressure kPa 470.5 441 500

Pressure kgf/cm2 4.8 4.5 5.1

Basic *

Stop lever angle_02

Pump speed r/min 600 600 600

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Pressure kPa 313.5 284 343

Pressure kgf/cm2 3.2 2.9 3.5

Stop lever angle_03

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Pressure kPa 470.5 441 500

Pressure kgf/cm2 4.8 4.5 5.1

Stop lever angle_04

Pump speed r/min 2100 2100 2100

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Pressure kPa 666.5 637 696

Pressure kgf/cm2 6.8 6.5 7.1

0000001101

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Timer stroke mm 3.7 3.5 3.9

Basic *

_02

Pump speed r/min 500 500 500

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Timer stroke mm 1.2 0.6 1.8

_03

Pump speed r/min 750 750 750

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Timer stroke mm 2 1.4 2.6

_04

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Timer stroke mm 3.7 3.3 4.1

_05

Pump speed r/min 2100 2100 2100

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Timer stroke mm 7.2 6.6 7.8

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 48.3 47.8 48.8

Timer stroke variation dT mm 0.6 0.4 0.8

Basic *

_02

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 48.3 47.3 49.3

Timer stroke TA mm 3.1 3.1 3.1

Timer stroke variation dT mm 0.6 0.2 1

_03

Pump speed r/min 1250 1250 1250

Boost pressure kPa 73.35 72 74.7

Boost pressure mmHg 550 540 560

Average injection quantity mm3/st. 38.2 36.7 39.7

Timer stroke TA mm 2.3 2.3 2.3

Timer stroke variation dT mm 1.4 0.8 2

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1 0.9 1.1

BCS stroke mm 3.7 3.6 3.8

Control lever angle alpha deg. 23 19 27

Control lever angle beta deg. 43 38 48

Information:

New Dipsticks With Full Range Readings
The new rear sump and front sump dipsticks are used with their respective oil pans. These oil pans are used in truck applications with set-back axles.The new dipsticks are different because they have a FULL RANGE zone versus other dipsticks that have the traditional FULL mark. These dipsticks are used for truck applications with various angles and slants of engine installation (angle = front to back tilt, slant = sideways tilt).Calibration
Use the following procedure to calibrate FULL RANGE dipsticks. A convenient time to calibrate the dipstick is at the first oil change.Refer to the PM Level 1 of the Maintenance Management Schedule of this publication for the proper oil change interval.To verify the "ADD" mark and establish the actual "FULL" mark, use the following procedure: Truck must be parked on a level surface.1. Operate the engine until it reaches normal operating temperature.2. Stop the engine. Drain the oil and change the oil filter.3. Fill the crankcase with 32 U.S. quarts (30.3 liters) of oil. Brakesaver models require 36 quarts (34 L). Remote mounted or auxiliary filters require additional oil. For all information pertaining to auxiliary oil filters, refer to the OEM or manufacturer's instructions.4. Allow the oil to drain back to the sump for a minimum of five minutes.5. Remove the dipstick. The oil level should be at the ADD mark. If it is not, mark the actual level on the dipstick. This is now the correct ADD mark.6. Add an additional 4 U.S. quarts (3.8 liters) of oil to the sump. Allow enough time for the oil to drain into the sump. Again, check the level on the dipstick.7. This is the correct FULL mark in the FULL RANGE zone on the dipstick. If it is not, mark the new FULL level on the dipstick. Remote mounted or auxiliary filters require additional oil also. For all information pertaining to auxiliary oil filters, refer to the OEM or manufacturer's instructions.8. Start the engine and operate until it reaches normal operating temperature. Stop the engine.9. Allow the oil to drain back to the sump for a minimum of 10 minutes.10. Remove the dipstick. The oil level should be near the FULL mark. If it is not, add oil until the level reaches the FULL mark on the dipstick.This procedure is correct for use with either the non-spacer plate oil pan or the spacer plate oil pan. Sump capacities and oil levels are the same for each oil pan.Any FULL RANGE dipstick for the 3406B Truck engine can be calibrated using this procedure.