104740-3652 ZEXEL 9 460 610 289 BOSCH INJECTION-PUMP ASSEMBLY 9460610289 1047403652


 

Information injection-pump assembly

BOSCH 9 460 610 289 9460610289
ZEXEL 104740-3652 1047403652
104740-3652 INJECTION-PUMP ASSEMBLY
Rating:
13
Buy INJECTION-PUMP ASSEMBLY 104740-3652 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104740-3652
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1112
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 11.8(120)
10. NOZZLE-HOLDER 105078-0012
11. NOZZLE 105007-1120

Include in #2:

104740-3652 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104740-3652 
9 460 610 289 
   
INJECTION-PUMP ASSEMBLY




Information:

Fuel System Information
Use only fuel as recommended in this section.
Fill the fuel tank at the end of each day of operation to drive out moist air and to prevent condensation. Do not fill the tank to the top. Fuel expands as it gets warm and may overflow.Do not fill the fuel filters with fuel before installing them. Contaminated fuel will cause accelerated wear to the fuel system parts.
Fuel Tanks
Drain the water and sediment from any fuel storage tank weekly, at the oil change period, and before the fuel tank is refilled. This will help prevent water and/or sediment from being pumped from the fuel storage tank into the engine fuel tank.Fuel tanks should contain some provision for draining water and sediment from the bottom of the tanks.Some fuel tanks use supply pipes that allow water and sediment to settle below the end

Have questions with 104740-3652?





Group cross 104740-3652 ZEXEL

Mitsubishi 

9 460 610 206 
 
INJECTION-PUMP ASSEMBLY
4D56
 
 
INJECTION-PUMP ASSEMBLY
4D56
104740-3652  
9 460 610 289 
 
INJECTION-PUMP ASSEMBLY
9 460 610 361 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 612 679 
MD103208 
INJECTION-PUMP ASSEMBLY
4D56
Back to top