104740-3041 ZEXEL 9 460 613 587 BOSCH INJECTION-PUMP ASSEMBLY 9460613587 1047403041 md050660

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 460 613 587 9460613587

ZEXEL 104740-3041 1047403041

MITSUBISHI MD050660 md050660

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104740-3041 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104740-3041
1.	_
2.	FUEL INJECTION PUMP	104640-3041
3.	NUMBER PLATE	146634-5400
4.	_	146672-0120
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105141-2080
8.	Nozzle and Holder	MD050590
9.	Open Pre:MPa(Kqf/cm2)	11.8{120}
10.	NOZZLE-HOLDER	105071-1300
11.	NOZZLE	105000-1800

Scheme ###:

1/6.	[1]	146601-0900	PACKING RING
1/9.	[1]	146616-5600	ADAPTOR
1/10.	[1]	139512-0500	GASKET
6.	[1]	146100-0020	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0020	DRIVE SHAFT
12/1.	[1]	146200-0000	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-0220	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0020	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-1400	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM D17.5&7.5T0.60
34.	[1]	146302-4800	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0000	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146400-5020	HYDRAULIC HEAD
50.	[1]	146400-5020	HYDRAULIC HEAD
50.	[1]	146400-5020	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET D12&6.4T1.00
55.	[4]	146430-0320	DELIVERY-VALVE ASSEMBLY
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0320	FITTING
60.	[4]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146502-2320	GOVERNOR COVER
67/1.	[1]	146505-5821	GOVERNOR COVER
67/1.	[1]	146505-5821	GOVERNOR COVER
67/1.	[1]	146505-5821	GOVERNOR COVER
67/1.	[1]	146505-5821	GOVERNOR COVER
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-3400	BLEEDER SCREW
67/16.	[1]	146526-2800	BLEEDER SCREW
67/78.	[1]	146600-4400	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN L53.00
67/201B.	[1]	146545-3500	THREADED PIN L55.00
67/201C.	[1]	146545-3600	THREADED PIN L57.00
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146510-2320	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146531-6720	CONTROL LEVER
72B.	[1]	146531-6820	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER
75.	[1]	013020-6040	UNION NUT M6P1H5
95.	[1]	146551-0720	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER D20&8.4T1.40
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER D17&6.4T1.60
115.	[1]	146875-8700	SLIDING SLEEVE
116.	[1]	146576-0000	SEALING CAP
117/1.	[1]	146577-0000	PLUG L1.70
117/1.	[1]	146577-0100	PLUG L1.90
117/1.	[1]	146577-0200	PLUG L2.10
117/1.	[1]	146577-0300	PLUG L2.30
117/1.	[1]	146577-0400	PLUG L2.50
117/1.	[1]	146577-0500	PLUG L2.70
117/1.	[1]	146577-0600	PLUG L2.90
117/1.	[1]	146577-0700	PLUG L3.10
117/1.	[1]	146577-0800	PLUG L3.30
117/1.	[1]	146577-0900	PLUG L3.50
117/1.	[1]	146577-1000	PLUG L3.70
117/1.	[1]	146577-1100	PLUG L3.90
117/1.	[1]	146577-1200	PLUG L4.10
117/1.	[1]	146577-1300	PLUG L4.30
117/1.	[1]	146577-1400	PLUG L4.50
117/1.	[1]	146577-1500	PLUG L4.70
117/1.	[1]	146577-1600	PLUG L4.90
117/1.	[1]	146577-1700	PLUG L5.10
117/1.	[1]	146577-5000	PLUG L1.8
117/1.	[1]	146577-5100	PLUG L2.0
117/1.	[1]	146577-5200	PLUG L2.2
117/1.	[1]	146577-5300	PLUG L2.4
117/1.	[1]	146577-5400	PLUG L2.6
117/1.	[1]	146577-5500	PLUG L2.8
117/1.	[1]	146577-5600	PLUG L3.0
117/1.	[1]	146577-5700	PLUG L3.2
117/1.	[1]	146577-5800	PLUG L3.4
117/1.	[1]	146577-5900	PLUG L3.6
117/1.	[1]	146577-6000	PLUG L3.8
117/1.	[1]	146577-6100	PLUG L4.0
117/1.	[1]	146577-6200	PLUG L4.2
117/1.	[1]	146577-6300	PLUG L4.4
117/1.	[1]	146577-6400	PLUG L4.6
117/1.	[1]	146577-6500	PLUG L4.8
117/1.	[1]	146577-6600	PLUG L5.0
117/1.	[1]	146877-0400	PLUG
117/1.	[1]	146877-0500	PLUG
117/1.	[1]	146877-0600	PLUG
117/1.	[1]	146877-0700	PLUG
117/1.	[1]	146877-4300	PLUG
117/1.	[1]	146877-4400	PLUG
117/1.	[1]	146877-4500	PLUG
117/1.	[1]	146877-4600	PLUG
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0020	OVER FLOW VALVE
137.	[2]	026512-1840	GASKET D17.9&12.2T1.50
138.	[1]	146609-1920	INLET UNION
200.	[1]	146206-0100	COILED SPRING
220.	[1]	146587-1500	COILED SPRING
224.	[1]	020006-1440	BLEEDER SCREW M6P1L14
230.	[1]	146613-2500	BRACKET
231.	[1]	020006-1440	BLEEDER SCREW M6P1L14
232.	[1]	146659-0020	CLAMPING BAND
234.	[1]	139106-0500	FLAT-HEAD SCREW M6P1.0H25
235.	[1]	146660-0120	BRACKET
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
243.	[1]	146621-1000	UNION NUT
245.	[2]	026512-1840	GASKET D17.9&12.2T1.50
245.	[2]	026512-1840	GASKET D17.9&12.2T1.50
246.	[1]	027412-2440	EYE BOLT
247.	[1]	146610-3120	INLET UNION
275.	[1]	146612-0900	BRACKET
276.	[2]	010010-1640	BLEEDER SCREW M10P1.5L16 4T
280.	[1]	146360-0020	START ADVANCE ASSY
281.	[1]	146600-0800	O-RING
800S.	[1]	146009-0221	PUMP HOUSING
800S/1/6.	[1]	146601-0900	PACKING RING
800S/1/9.	[1]	146616-5600	ADAPTOR
800S/1/10.	[1]	139512-0500	GASKET
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
903.	[1]	146672-0120	PULSE GENERATOR
903/2.	[1]	146600-1300	O-RING &13W1.9
906.	[1]	146634-5400	NAMEPLATE
907.	[1]	025803-1610	WOODRUFF KEY
908.	[1]	013021-2140	UNION NUT M12P1.75H10
909.	[1]	014111-2440	LOCKING WASHER D21.5&12.2T3
916.	[1]	146658-1720	WIRE

Include in #2:

104740-3041 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 613 587 9460613587

ZEXEL 104740-3041 1047403041

MITSUBISHI MD050660 md050660

Zexel num

Bosch num

Firm num

Name

104740-3041

9 460 613 587

MD050660 MITSUBISHI

INJECTION-PUMP ASSEMBLY
4D55 * K

Calibration Data:

Adjustment conditions

(Note)
For Japan: year/month/day (change sequence) 1988/11/24 (1)

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 33.9 33.4 34.4

Difference in delivery mm3/st. 3

Basic *

Injection timing adjustment_02

Pump speed r/min 2550 2550 2550

Average injection quantity mm3/st. 16.5 12.4 20.6

Injection timing adjustment_03

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 35.05 33 37.1

Injection timing adjustment_04

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 39.65 37.6 41.7

Injection timing adjustment_05

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 33.9 32.9 34.9

Injection timing adjustment_06

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 33.7 33.2 34.2

Difference in delivery mm3/st. 3

Basic *

Remarks
For Japan

Injection timing adjustment_07

Pump speed r/min 2550 2550 2550

Average injection quantity mm3/st. 16.1 12.1 20.1

Remarks
For Japan

Injection timing adjustment_08

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 34.2 32.2 36.2

Remarks
For Japan

Injection timing adjustment_09

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 38.7 36.7 40.7

Remarks
For Japan

Injection timing adjustment_10

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 33.7 32.7 34.7

Remarks
For Japan

Injection quantity adjustment

Pump speed r/min 2550 2550 2550

Average injection quantity mm3/st. 16.5 13.4 19.6

Difference in delivery mm3/st. 4

Basic *

Injection quantity adjustment_02

Pump speed r/min 2900 2900 2900

Average injection quantity mm3/st. 5

Injection quantity adjustment_03

Pump speed r/min 2550 2550 2550

Average injection quantity mm3/st. 16.1 13.1 19.1

Difference in delivery mm3/st. 4

Basic *

Remarks
For Japan

Injection quantity adjustment_04

Pump speed r/min 2900 2900 2900

Average injection quantity mm3/st. 5

Remarks
For Japan

Governor adjustment

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 8.65 6.6 10.7

Difference in delivery mm3/st. 2.5

Basic *

Governor adjustment_02

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 3

Governor adjustment_03

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 9 7.5 10.5

Governor adjustment_04

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 8.4 6.4 10.4

Difference in delivery mm3/st. 2.5

Basic *

Remarks
For Japan

Governor adjustment_05

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 3

Remarks
For Japan

Governor adjustment_06

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 8.4 6.4 10.4

Remarks
For Japan

Boost compensator adjustment

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 8.65 6.6 10.7

Boost compensator adjustment_02

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 21.6 15.6 27.6

Remarks
For Japan

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 78 68 88

Basic *

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 76 66 86

Basic *

Remarks
For Japan

Speed control lever angle

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

Speed control lever angle_02

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 0 0 0

Remarks
For Japan: Magnet OFF

0000000901

Pump speed r/min 1250 1250 1250

Overflow quantity cm3/min 390 258 522

_02

Pump speed r/min 1250 1250 1250

Overflow quantity cm3/min 420 288 552

Remarks
For Japan

Stop lever angle

Pump speed r/min 1250 1250 1250

Pressure kPa 480.5 451 510

Pressure kgf/cm2 4.9 4.6 5.2

Basic *

Stop lever angle_02

Pump speed r/min 600 600 600

Pressure kPa 323.5 294 353

Pressure kgf/cm2 3.3 3 3.6

Stop lever angle_03

Pump speed r/min 1250 1250 1250

Pressure kPa 480.5 451 510

Pressure kgf/cm2 4.9 4.6 5.2

Stop lever angle_04

Pump speed r/min 2100 2100 2100

Pressure kPa 676.5 647 706

Pressure kgf/cm2 6.9 6.6 7.2

Stop lever angle_05

Pump speed r/min 1250 1250 1250

Pressure kPa 470.5 441 500

Pressure kgf/cm2 4.8 4.5 5.1

Basic *

Remarks
For Japan

Stop lever angle_06

Pump speed r/min 600 600 600

Pressure kPa 313.5 284 343

Pressure kgf/cm2 3.2 2.9 3.5

Remarks
For Japan

Stop lever angle_07

Pump speed r/min 1250 1250 1250

Pressure kPa 470.5 441 500

Pressure kgf/cm2 4.8 4.5 5.1

Remarks
For Japan

Stop lever angle_08

Pump speed r/min 2100 2100 2100

Pressure kPa 666.5 637 696

Pressure kgf/cm2 6.8 6.5 7.1

Remarks
For Japan

0000001101

Pump speed r/min 850 850 850

Timer stroke mm 3.4 3.2 3.6

Basic *

_02

Pump speed r/min 850 850 850

Timer stroke mm 3.4 3.2 3.6

_03

Pump speed r/min 1750 1750 1750

Timer stroke mm 9.9 9.3 10.5

_04

Pump speed r/min 2100 2100 2100

Timer stroke mm 10.3 9.9 10.7

_05

Pump speed r/min 1750 1750 1750

Timer stroke mm 5.55 4.9 6.2

_06

Pump speed r/min 850 850 850

Timer stroke mm 3.3 3.1 3.5

Basic *

Remarks
For Japan

_07

Pump speed r/min 850 850 850

Timer stroke mm 3.3 3.1 3.5

Remarks
For Japan

_08

Pump speed r/min 1750 1750 1750

Timer stroke mm 8.7 8.1 9.3

Remarks
For Japan

_09

Pump speed r/min 2100 2100 2100

Timer stroke mm 10.3 9.9 10.7

Remarks
For Japan

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1.4 1.3 1.5

Control lever angle alpha deg. 59 55 63

Control lever angle beta deg. 43 38 48

Control lever angle gamma
Partial lever position deg. 12 11.5 12.5

Test data Ex:

0000001801 W-CSD ADJUSTMENT

Adjustment of the W-CSD Adjust the timer stroke and the control lever position in accordance with the ambient temperature at adjustment using the graph. Y1:Timer stroke Y2:Control lever position X:Temperature A:Timer stroke B:Lever position
----------

----------

Information:

Self-Diagnostics
The 3176 Truck Engine has a limited ability to diagnose itself. When the System detects a problem, a Diagnostic Code is generated which activates the Diagnostic Lamp. In most cases the code will be stored in permanent memory in the ECM.Diagnostic Codes that represent current faults are called ACTIVE and indicate that a problem exists. These active diagnostic codes should be investigated first.Diagnostic Codes stores in memory are called LOGGED. The problem may have been temporary or repaired since the time it was LOGGED. These codes may not mean something needs to be repaired, but may be helpful indicators when INTERMITTENT problems exist, which could be used to troubleshoot and analyze potential problems. In addition, some logged diagnostic codes record events and performance history, rather than failures.Diagnostic Codes-Interpretation
When the vehicle is equipped with Cruise Control (CC)
1. Turn ignition key ON (engine does not need to be started to view codes).2. The Diagnostic Lamp will illuminate for five seconds, blink off, turn on again for five seconds, then off for five seconds. The lamp will then begin to flash the first number of the two-digit code (count the flashes). The lamp will blink off for two seconds, then begin to flash the second number of the two-digit code in the same manner as the first. If more than one code is present, they will follow the first code after a few seconds and be displayed in the same manner.3. Active diagnostic codes may be displayed at any time by using the Cruise Control (CC) Switches. The engine can be running or the ignition key ON. Turn the Cruise Control ON/OFF switch to OFF and move the SET/RESUME switch to RESUME position. The Check Engine Light will flash to indicate a 2-digit fault code and the switch may be released from the RESUME position.When the vehicle is NOT equipped with Cruise Control (CC):
Some trucks are equipped with a Check Engine Light Switch to check diagnostic codes. The Check Engine Light can be used to communicate the specific 3176 system diagnostic fault. The Check Engine light will flash to indicate the 2-digit diagnostic fault code. This can be done by connecting a push button momentary switch from position H of connector P7 thru the momentary switch and back to position B of connector P7.With the switch depressed, the "Check Engine" light will begin to flash. The sequence of flashes represents the 3176 system diagnostic message.The first sequence of flashes adds up to the first digit of the diagnostic code. After a two second pause, a second sequence of flashes will occur which represents the second digit of the diagnostic code. Any additional codes will follow and will be displayed in the same manner.Refer to 3176 Truck Engine Test Procedures, Form SENR5112 and the Service Manual for troubleshooting the 3176 System. For further information or assistance for repairs, contact an authorized Caterpillar dealer.Some trucks have electronic dashboards that provide a direct readout of 3176 engine diagnostic codes. Follow the truck manufacturer's instructions