104740-0521 ZEXEL 9 460 612 502 BOSCH INJECTION-PUMP ASSEMBLY 9460612502 1047400521 pn6413800a

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 460 612 502 9460612502

ZEXEL 104740-0521 1047400521

MAZDA PN6413800A pn6413800a

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104740-0521 zexel genuine, new aftermarket engine parts with delivery

Components :

0.	INJECTION-PUMP ASSEMBLY	104740-0521
1.	_
2.	FUEL INJECTION PUMP	104640-0521
3.	NUMBER PLATE	146960-6500
4.	_	146672-5520
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105148-1183
8.	Nozzle and Holder	PN40 13 H50C
9.	Open Pre:MPa(Kqf/cm2)	10.8{110}
10.	NOZZLE-HOLDER	105078-0111
11.	NOZZLE	105007-1210

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0720	DRIVE SHAFT
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-3320	ROLLER SET
24.	[1]	146303-0100	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-2920	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-3900	PUMP PLUNGER
32.	[1]	146301-0200	SLIDING PIECE
33.	[1]	146603-0700	SHIM D17.5&7.5T0.60
34.	[1]	146302-8400	COMPRESSION SPRING
34B.	[1]	146302-8800	COMPRESSION SPRING
34C.	[1]	146302-8100	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0700	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM
48/1.	[1]	146690-5900	SHIM
48/1.	[1]	146690-6000	SHIM
48/1.	[1]	146690-6100	SHIM
48/1.	[1]	146690-6200	SHIM
48/1.	[1]	146690-6300	SHIM
48/1.	[1]	146690-6400	SHIM
48/1.	[1]	146690-6500	SHIM
48/1.	[1]	146690-6600	SHIM
48/1.	[1]	146690-6700	SHIM
48/1.	[1]	146690-6800	SHIM
48/1.	[1]	146690-6900	SHIM
48/1.	[1]	146690-7000	SHIM
48/1.	[1]	146690-7100	SHIM
48/1.	[1]	146690-7200	SHIM
48/1.	[1]	146690-7300	SHIM
48/1.	[1]	146690-7400	SHIM
48/1.	[1]	146690-7500	SHIM
48/1.	[1]	146690-7800	SHIM
49.	[2]	146234-0120	GUIDE PIN
50.	[1]	146403-2820	HYDRAULIC HEAD
50.	[1]	146403-2820	HYDRAULIC HEAD
50.	[1]	146403-2820	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET D12&6.4T1.00
55.	[4]	146430-3420	DELIVERY-VALVE ASSEMBLY
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0220	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146503-7220	GOVERNOR COVER
67/1.	[1]	146508-4921	GOVERNOR COVER
67/14.	[1]	146621-1700	UNION NUT
67/16.	[1]	146526-2800	BLEEDER SCREW
67/23.	[1]	146930-0120	BRACKET
67/24.	[2]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
67/64.	[1]	146930-0020	BRACKET
67/78.	[1]	146600-1000	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN L53.00
67/201B.	[1]	146545-3500	THREADED PIN L55.00
67/201C.	[1]	146545-3600	THREADED PIN L57.00
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146513-8920	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146539-9020	CONTROL LEVER
72B.	[1]	146539-9120	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER
75.	[1]	146621-0700	UNION NUT
80.	[1]	146539-9420	CONTROL LEVER
81.	[2]	020105-1040	BLEEDER SCREW M5P0.8L10
95.	[1]	146851-0220	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0420	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER D20&8.4T1.40
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER D17&6.4T1.60
115.	[1]	146575-6800	SLIDING SLEEVE
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-1800	PLUG L2.10
117/1.	[1]	146577-1900	PLUG L2.30
117/1.	[1]	146577-2000	PLUG L2.50
117/1.	[1]	146577-2100	PLUG L2.70
117/1.	[1]	146577-2200	PLUG L2.90
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-6700	PLUG L2.2
117/1.	[1]	146577-6800	PLUG L2.4
117/1.	[1]	146577-6900	PLUG L2.6
117/1.	[1]	146577-7000	PLUG L2.8
117/1.	[1]	146577-7100	PLUG L3.0
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
117/1.	[1]	146877-0100	PLUG L5.3
117/1.	[1]	146877-0200	PLUG L5.4
117/1.	[1]	146877-0300	PLUG L5.5
117/1.	[1]	146877-4700	PLUG
117/1.	[1]	146877-4800	PLUG
117/1.	[1]	146877-4900	PLUG
117/1.	[1]	146877-5000	PLUG
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-1120	OVER FLOW VALVE
137.	[2]	026512-1540	GASKET D15.4&12.2T1.50
138.	[1]	146608-3220	INLET UNION
200.	[1]	146206-0100	COILED SPRING
205.	[1]	029470-4030	WOODRUFF KEY
214.	[1]	146542-1400	BUSHING
215.	[1]	146542-1500	BUSHING
217.	[1]	146542-5700	SLOTTED WASHER
218.	[1]	146592-4500	COILED SPRING
219.	[1]	146541-3000	BUSHING
220.	[1]	146592-4600	COILED SPRING
221.	[1]	146928-9320	BRACKET
232.	[1]	146659-3600	CLAMPING BAND
236.	[1]	139006-4800	BLEEDER SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-4320	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
243.	[1]	146621-1000	UNION NUT
245.	[3]	026512-1540	GASKET D15.4&12.2T1.50
246.	[1]	139812-1900	EYE BOLT
247.	[1]	146665-3620	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
252.	[1]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
275.	[1]	146612-6100	BRACKET
276.	[2]	010010-1640	BLEEDER SCREW M10P1.5L16 4T
280.	[1]	146360-8921	START ADVANCE ASSY
281.	[1]	146600-0800	O-RING
310.	[1]	146683-5320	POTENTCIOMETER
316.	[1]	146680-4920	DAMPER
317.	[2]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
317.	[2]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
800S.	[1]	146019-8920	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-0720	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-2420	REPAIR SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
903.	[1]	146672-5520	PULSE GENERATOR
903/2.	[1]	146600-1300	O-RING &13W1.9
906.	[1]	146960-6500	NAMEPLATE

Include in #2:

104740-0521 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 612 502 9460612502

ZEXEL 104740-0521 1047400521

MAZDA PN6413800A pn6413800a

Zexel num

Bosch num

Firm num

Name

104740-0521
104740-0522

9 460 612 502

PN6413800A MAZDA

INJECTION-PUMP ASSEMBLY
PN * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 30.3 29.8 30.8

Difference in delivery mm3/st. 2.5

Basic *

Injection timing adjustment_02

Pump speed r/min 2635 2635 2635

Average injection quantity mm3/st. 12.4 9.9 14.9

Injection timing adjustment_03

Pump speed r/min 2350 2350 2350

Average injection quantity mm3/st. 28.6 24.6 32.6

Injection timing adjustment_04

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 30.3 29.3 31.3

Injection timing adjustment_05

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 28.7 25.7 31.7

Injection quantity adjustment

Pump speed r/min 2635 2635 2635

Average injection quantity mm3/st. 12.4 10.4 14.4

Difference in delivery mm3/st. 4

Basic *

Injection quantity adjustment_02

Pump speed r/min 2850 2850 2850

Average injection quantity mm3/st. 5

Governor adjustment

Pump speed r/min 410 410 410

Average injection quantity mm3/st. 7 6 8

Difference in delivery mm3/st. 2

Basic *

Governor adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 3

Governor adjustment_03

Pump speed r/min 410 410 410

Average injection quantity mm3/st. 7 5.5 8.5

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 50 30 70

Basic *

Remarks
Full

Speed control lever angle

Pump speed r/min 410 410 410

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

0000000901

Pump speed r/min 1500 1500 1500

Overflow quantity cm3/min 438 288 588

Stop lever angle

Pump speed r/min 1500 1500 1500

Pressure kPa 539 519 559

Pressure kgf/cm2 5.5 5.3 5.7

Basic *

Stop lever angle_02

Pump speed r/min 1500 1500 1500

Pressure kPa 539 519 559

Pressure kgf/cm2 5.5 5.3 5.7

Stop lever angle_03

Pump speed r/min 2350 2350 2350

Pressure kPa 745 716 774

Pressure kgf/cm2 7.6 7.3 7.9

0000001101

Pump speed r/min 1500 1500 1500

Timer stroke mm 6.2 6 6.4

Basic *

_02

Pump speed r/min 500 500 500

Timer stroke mm 1

_03

Pump speed r/min 875 875 875

Timer stroke mm 2.1 1.3 2.9

_04

Pump speed r/min 1000 1000 1000

Timer stroke mm 2.9 2.3 3.5

_05

Pump speed r/min 1500 1500 1500

Timer stroke mm 6.2 5.9 6.5

_06

Pump speed r/min 2250 2250 2250

Timer stroke mm 9.5 8.6 10.4

_07

Pump speed r/min 2350 2350 2350

Timer stroke mm 9.8 9.4 10.2

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 20 19.5 20.5

Timer stroke variation dT mm 1 0.8 1.2

Basic *

_02

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 20 19 21

Timer stroke variation dT mm 1 0.7 1.3

_03

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 10 8.5 11.5

Timer stroke variation dT mm 1.7 1 2.4

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.72 5.62 5.82

MS dimension mm 0.7 0.6 0.8

Control lever angle alpha deg. 25 21 29

Control lever angle beta deg. 43 38 48

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

N:Pump speed P:Boost pressure Q:Injection quantity V:Output voltage C/L: control lever position I:Idle F:Full A:Adjusting point B:Checking point Vi:Applied voltage
----------

----------
N1=1000r/min P1=0kPa(0mmHg) Q1=20.8+-1.0mm3/st V1=4.66+-0.03V V2=(1.00V) V3=(7.80V) a=(20.5deg) b=0deg c=43+-5deg Vi=10V

0000001901 W-CSD ADJUSTMENT

Adjustment of the W-CSD 1. Adjustment of the advance angle of the timer (1)Determine the timer advance angle from the graph (J). Timer stroke (TA): TA = -0.041t + 2.05 (t>=-20 deg C) Control lever gap: L = -0.102t + 4.08 (-20 deg C <= t <= 40 deg C) (2)Adjust screw A so that the timer advance angle determined in item (1) is obtained. 2. Adjustment of the W-FICD (1)Insert a block gauge L1 between the control lever (D) and the idle switch (E). (2)In the above condition, insert a block gauge L mm determined from the graph between the control lever D's adjusting screw and the idle stopper E. Adjust using screw (B) and fix using the nut. X:Temperature t (deg C) Y1:Timer stroke TA (mm) Y2:Control lever gap L1 (mm)
----------
L1=6.3+-0.05mm
----------
L1=6.3+-0.05mm

0000002001 DASHPOT ADJUSTMENT

Adjustment of the dash pot 1. Hold the control lever D at the idle position. 2. Adjust using screw (F) so that the clearance between the control lever screw (F) and the dashpot (H) is L, then fix using the nut (G).
----------
L=1.5+-0.3mm
----------
L=1.5+-0.3mm

Information:

This Program must be administered as soon as possible. When reporting the repair, use "PI3325" as the Part Number, "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description Code. Exception: If the repair is done after failure, use "PI3325" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Completion Date
February 29, 2000Termination Date
February 29, 2000Problem
Upgrade software needs to be installed on certain 3606, 3608, 3612, and 3616 diesel engines with the Marine Monitoring System (MMS) to become Y2K compatible.
Affected Product
Model & Identification Number
3606 (8RB29, 8RB656-661, 8RB669, 8RB672-673, 8RB680-688, 8RB691-00692, 8RB695-702, 8RB711-00713, 8RB715, 8RB717-718, 8RB721-723)
3608 (6MC535-536, 6MC550, 6MC561-562, 6MC582-586)
3612 (9RC230, 9RC242, 9RC247-253, 9RC256-257, 9RC259-260)
3616 (1PD289-293, 1PD295, 1PD306, 1PD308, 1PD313-336)
Parts Needed
- Dealers will need to obtain the Upgrade Files for this program.- 1 Blank formatted 1.44 MB floppy disk for Winfile Upgrade- 6 Blank formatted 1.44 MB floppy disks for InTouch 5.6B UpgradeAction Required
See the attached procedure.
Owner Notification
U.S. and Canadian owners will receive the attached Owner Notification.
Service Claim Allowances
This is a 1-hour job.
U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report.
Parts Disposition
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach.(1-Owner Notification)(1-Rework Procedure)Copy Of Owner Notification For U.S. And Canadian Owners
Rework Procedure
Windows 3.11 Winfile Upgrade
This upgrade is necessary for Windows 3.11 to correctly date stamp files after the year 2000, The first three steps in the following procedure will be done in the office or shop.
1. Obtain the file. The file can be obtained from the Caterpillar Mailbox, SISWEB, or from the SIS disks that are released monthly. The file part number is 174-8693.2. Unzip the file. The 174-8693.exe file is a self-executing zip file. To Unzip, place the file in a known location on the hard drive. Run the file. At the dialog box type in 'A:\' where it asks for the folder to place unzipped files. Install a blank formatted disk into the A: drive. Select UNZIP or press "ENTER". This will unzip the files to the floppy drive. If your floppy drive is not 'A:' substitute your floppy drive letter for A in the above instuctions.)
3. Label the disk. This disk should be labeled "Winfile.exe Y2K Upgrade". This disk or a copy of this disk can be used to do multiple upgrades. It is not necessary to repeat steps 1-3 for each upgrade.4. Perform the upgrade. The upgrade should be done from the DOS prompt. Attach a keyboard to the MMS computer. With the MMS program running press "ALT"and "F4" at the same time. This will exit the MMS program. Press "ALT"and "F4" at the same time again and you will get a dialog box that asks you to confirm you want to end your Windows session. Press "ENTER" to confirm. Install the floppy labeled "Winfile.exe Y2K Upgrade" into the floppy drive on the MMS