104740-0336 ZEXEL 9 460 614 261 BOSCH INJECTION-PUMP ASSEMBLY 9460614261 1047400336 se5513800a

Parts Location
Illustration 2 g01880455
Exploded view
Illustration 3 g01880482
Diesel Particulate Filter Group (shown installed) (1) 5P-1076 Hard Washer (2) 8T-4121 Hard Washer (3) 8T-4139 Bolt (4) 8T-4195 Bolt (5) 141-1480 Clamp As (6) 233-8141 Diesel Particulate Filter Gp (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As Installation Procedure
You must thoroughly understand the guidelines in Special Instruction, REHS5606, "Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications)" before you attempt any part of the following installation procedure.The installation procedure that follows is specific for the listed machines.Diesel Particulate Filter Installation
Illustration 4 g01833715
Right Side View (14) Muffler (existing) (15) 208-5448 Support As (existing) (16) 208-5451 Support As (existing)
Remove the existing muffler (14). Refer to the appropriate Disassembly and Assembly manual for your machine. Refer to Illustration 4.
Remove the existing 208-5448 Support As (15) from the engine. Discard the existing support assembly. Refer to Illustration 4.Note: Do not remove the existing 208-5451 Support As (16). Refer to Illustration 4.
Illustration 5 g01880233
(2) 8T-4121 Hard Washers (4) 8T-4195 Bolts (8) 235-3962 Support As
Position 235-3962 Support As (8) in the former location for support assembly (15). Refer to Illustration 4.
Secure support assembly (8) by using two 8T-4195 Bolts (4) and two 8T-4121 Hard Washers (2). Refer to Illustration 5.
Illustration 6 g01879959
(1) 5P-1076 Hard Washers (3) 8T-4139 Bolts (7) 8T-4244 Nut (8) 235-3962 Support As (9) 235-3963 Clamp As (Lower half)
Remove the two bolts, two hard washers, two lock washers, and two nuts from 235-3963 Clamp As (9). Keep these parts together along with