Fuel injectors
  1. Home
  2. injection
  3. #1047002005

104700-2005 ZEXEL 9 460 613 148 BOSCH INJECTION-PUMP ASSEMBLY 9460613148 1047002005 167005c900


 

Information injection-pump assembly

BOSCH 9 460 613 148 9460613148
ZEXEL 104700-2005 1047002005
NISSAN 167005C900 167005c900
104700-2005 INJECTION-PUMP ASSEMBLY
Rating:
33
Buy INJECTION-PUMP ASSEMBLY 104700-2005 zexel genuine, new aftermarket engine parts with delivery

Components :

0. INJECTION-PUMP ASSEMBLY 104700-2005
1. _
2. FUEL INJECTION PUMP 104600-2005
3. NUMBER PLATE 148633-4200
4. _
5. CAPSULE
6. ADJUSTING DEVICE 105141-8033
7. NOZZLE AND HOLDER ASSY 105141-2971
8. Nozzle and Holder 16600-1C310
9. Open Pre:MPa(Kqf/cm2) 12.7{130}
10. NOZZLE-HOLDER 105071-1361
11. NOZZLE 105000-2210

Scheme ###:

PACKING RING
1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0020 SUPPLY PUMP
9. [1] 148103-0400 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 148200-0620 DRIVE SHAFT
12/3. [1] 146201-0000 WOODRUFF KEY
17. [1] 146204-0000 PLAIN WASHER
20. [1] 148210-0120 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-4620 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-1900 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
33. [1] 146603-0700 SHIM D17.5&7.5T0.60
34. [1] 146306-2200 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0700 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0600 GUIDE PIN
50. [1] 146403-6520 HYDRAULIC HEAD
50. [1] 146403-6520 HYDRAULIC HEAD
50. [1] 146403-6520 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-5920 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0700 COMPRESSION SPRING
58. [4] 146440-2720 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
123. [1] 146620-8800 FLAT-HEAD SCREW
130. [1] 146421-1020 CAPSULE
130/2. [1] 139508-0200 GASKET D11.4&8.2T1
130/3. [1] 146422-0300 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-3220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 148120-0020 OVER FLOW VALVE
137. [3] 139512-0200 GASKET D18.5&12.2T1.00
138. [1] 146667-0320 INLET UNION
158. [1] 146614-6900 SPACER BUSHING
200. [1] 146206-0100 COILED SPRING
230. [1] 148613-1020 BRACKET
236. [1] 146620-2700 HEX-SOCKET-HEAD CAP SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146688-0120 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-1000 UNION NUT
245. [3] 139512-0200 GASKET D18.5&12.2T1.00
246. [1] 139812-0500 EYE BOLT
247. [1] 146665-4120 INLET UNION
248. [1] 146614-0200 SPACER BUSHING
275. [1] 148612-0800 BRACKET
276. [2] 010010-2840 BLEEDER SCREW
278. [2] 146616-8500 SPACER BUSHING
282. [1] 139006-4400 BLEEDER SCREW
298. [3] 146659-8000 CLAMPING BAND
504/1. [1] 146649-4500 RESISTER
504/1. [1] 146649-4600 RESISTER
504/1. [1] 146649-4700 RESISTER
504/1. [1] 146649-4800 RESISTER
504/1. [1] 146649-4900 RESISTER
504/1. [1] 146649-5000 RESISTER
504/1. [1] 146649-5100 RESISTER
504/1. [1] 146649-5200 RESISTER
504/1. [1] 146649-5300 RESISTER
504/1. [1] 146649-5400 RESISTER
504/1. [1] 146649-5500 RESISTER
504/1. [1] 146649-5600 RESISTER
504/1. [1] 146649-5700 RESISTER
505. [1] 148530-1121 GOVERNOR;ELECTRIC
506. [3] 146620-8900 FLAT-HEAD SCREW
515. [1] 106144-1061 TIMING CONTROL VALVE
515/8. [1] 161440-3800 O-RING
515/9. [1] 161440-3700 O-RING
516. [2] 010206-1440 HEX-SOCKET-HEAD CAP SCREW M6P1L14
531. [1] 479773-4522 PULSE GENERATOR
531/6. [1] 479773-6500 O-RING
800S. [1] 148009-0420 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
810S. [1] 146600-4620 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
856S. [1] 146600-4920 REPAIR SET
878S. [1] 148600-1300 SEAL RING
906. [1] 148633-4200 NAMEPLATE

Include in #2:

104700-2005 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
104700-2005 
104700-2006 
9 460 613 148 
167005C900  NISSAN
INJECTION-PUMP ASSEMBLY
CD20-T K 11CL INJECTION PUMP ASSY COVEC 4 COVEC




Information:


Illustration 1 g00564355
7W-2743 Electronic Speed Switch (ESS)
(1) Push button for Overspeed Verification
(2) Reset button
(3) Overspeed indicator lamp
(4) Seal screw plug for adjusting the engine overspeed
(5) Seal screw plug for adjusting the crank terminate speed
(6) Seal screw plug for adjusting the oil step pressure speed setting The calibration of the crank terminate adjustment can increase the crank terminate speed or the calibration of the crank terminate adjustment can decrease the crank terminate speed. The crank terminate speed determines when the starting motor is disengaged. The starting motor is disengaged when the system voltage is cancelled by the crank termination speed. At the crank terminate speed, the engine must be able to run without the assistance of the starting motor.
Remove the lockwire and the seal from seal screw plug (5). Remove seal screw plug (5) from the access hole for the crank terminate adjusting screw.
Use a small screwdriver to lightly turn the crank terminate adjusting screw in the direction of the "MAX" arrow or the clockwise direction. Turn the screw twenty times. The crank terminate adjusting screw will vary the setting of a potentiometer that is inside of the ESS. The crank terminate adjusting screw will not cause damage to the potentiometer. Also, the screw can not be removed if the screw is turned in the wrong direction.
Turn the crank terminate adjusting screw for twelve turns in the opposite direction of the "MAX" arrow or the counterclockwise direction. This will establish an approximate crank terminate setting.
Connect a voltmeter with the positive lead at terminal (ESS-12) and the negative lead at (ESS-5). Use a 6V-7070 Digital Multimeter or a voltmeter with the same accuracy. Start the engine. Record the engine rpm when the starting motor disengages. The starting motor disengages when the open circuit voltage is cancelled by the crank terminate setting. Refer to the Speed Specification Chart for the correct crank terminate setting.
If the setting in Step 4 is not correct, proceed with Steps 6, 7, and 8. If the setting is correct go to Step 8.
Stop the engine and turn the crank terminate adjusting screw for one full turn in the clockwise direction in order to increase the crank terminate speed. Turn the crank terminate adjusting screw for one full turn in the counterclockwise direction in order to decrease the crank terminate speed.
While the voltmeter is still connected, start the engine. Record the engine rpm when the starting motor disengages. The starting motor will disengage when the voltage is cancelled by the crank terminate speed. Repeat Steps 6 and 7 until the crank terminate speed is correct.
Install seal screw plug (5) in the access hole for the crank terminate adjusting screw. Tighten the screw to a torque of 0.20 0.03 N m (1.8 .3 lb in). Install the lockwire and the seal if the overspeed calibration and the oil step speed calibration are also complete.

Have questions with 104700-2005?





Group cross 104700-2005 ZEXEL

104700-2000  
 
 
INJECTION-PUMP ASSEMBLY
104700-2001  

104700-2002 
9 460 611 905 
 
INJECTION-PUMP ASSEMBLY
104700-2002  

104700-2003 
9 460 611 906 
 
INJECTION-PUMP ASSEMBLY
104700-2003  

104700-2004 
9 460 611 326 
 
INJECTION-PUMP ASSEMBLY
104700-2004  

104700-2005 
9 460 610 970 
 
INJECTION-PUMP ASSEMBLY

Nissan 

104700-2005  

104700-2006 
9 460 613 148 
167005C900 
INJECTION-PUMP ASSEMBLY
CD20-T
104700-2006  
 
 
INJECTION-PUMP ASSEMBLY
Back to top