101608-1525 ZEXEL 9 400 613 508 BOSCH INJECTION-PUMP ASSEMBLY 9400613508 1016081525 me072750

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 400 613 508 9400613508

ZEXEL 101608-1525 1016081525

MITSUBISHI ME072750 me072750

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101608-1525 zexel genuine, new aftermarket engine parts with delivery

Service parts 101608-1525 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101062-8180

3. GOVERNOR 105932-2064

4. SUPPLY PUMP 105210-6020

5. AUTOM. ADVANCE MECHANIS 105643-1170

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-7522

11. Nozzle and Holder ME072745

12. Open Pre:MPa(Kqf/cm2) 15.7{160}/21.6{220}

13. NOZZLE-HOLDER 105041-3031

14. NOZZLE

105025-1160

15. NOZZLE SET

Include in #1:

101606-0410 as _

101608-1525 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 613 508 9400613508

ZEXEL 101608-1525 1016081525

MITSUBISHI ME072750 me072750

Zexel num

Bosch num

Firm num

Name

101608-1525

9 400 613 508

ME072750 MITSUBISHI

INJECTION-PUMP ASSEMBLY
6D16T2 K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8260

Bosch type code 9 430 610 133

Nozzle 105780-0120

Bosch type code 1 688 901 990

Nozzle holder 105780-2190

Opening pressure MPa 18

Opening pressure kgf/cm2 184

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 131424-8420

Overflow valve opening pressure kPa 255 221 289

Overflow valve opening pressure kgf/cm2 2.6 2.25 2.95

Tester oil delivery pressure kPa 255 255 255

Tester oil delivery pressure kgf/cm2 2.6 2.6 2.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 1-5-3-6- 2-4

Pre-stroke mm 3.2 3.15 3.25

Beginning of injection position
Governor side NO.1

Difference between angles 1
Cal 1-5 deg. 60 59.5 60.5

Difference between angles 2
Cal 1-3 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cyl.1-2 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-4 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 12.5

Pump speed r/min 800 800 800

Each cylinder's injection qty mm3/st. 113 109.6 116.4

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point Z

Rack position 9.5+-0.5

Pump speed r/min 280 280 280

Each cylinder's injection qty mm3/st. 11.5 9.8 13.2

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12.5)

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 113 112 114

Basic *

Fixing the lever *

Boost pressure kPa 35.3 35.3

Boost pressure mmHg 265 265

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.9

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 117.5 113.5 121.5

Fixing the lever *

Boost pressure kPa 35.3 35.3

Boost pressure mmHg 265 265

Injection quantity adjustment_05

Adjusting point C

Rack position R2(R1-0. 65)

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 108.5 104.5 112.5

Fixing the lever *

Boost pressure kPa 35.3 35.3

Boost pressure mmHg 265 265

Boost compensator adjustment

Pump speed r/min 500 500 500

Rack position R2-0.7

Boost pressure kPa 8 6.7 9.3

Boost pressure mmHg 60 50 70

Boost compensator adjustment_02

Pump speed r/min 500 500 500

Rack position R2(R1-0. 65)

Boost pressure kPa 22 22 22

Boost pressure mmHg 165 165 165

Timer adjustment

Pump speed r/min 1200--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1150

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1350

Advance angle deg. 2 1.5 2.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)Boost compensator stroke: BCL
----------
T1=N90 BCL=0.7+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=40mm
----------
a=18.5deg+-5deg b=40deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Set the stopper bolt at speed = aa and rack position = bb. Confirm non-injection. (2)After setting the stopper bolt, confirm non-injection at speed cc. Rack position = dd (non-injection rack position).
----------
aa=1350r/min bb=7-0.5mm cc=275r/min dd=(8.6)mm
----------
a=11.5deg+-5deg b=28deg+-5deg

0000001501 LEVER

(A) Idle (B) Full speed (C) Base lever (D) Accelerator lever (E) Accelerator lever delivery position 1. Measure speed lever angle (1)Measure the angle when the accelerator lever (D) contacted the base lever (C) at a.
----------

----------
b=40deg+-3deg c=18.5deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's tooth at No 1 cylinder's beginning of injection (3)B.T.D.C.: aa (4)-
----------
aa=10deg
----------
a=(2deg)

Information:

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Table 1
Required Parts
Item Qty Part Number Part Name Former Part Number(1)
1 1 307-3245 Injector As 5T-5045
(1) The former part number listed is for reference only and may differ.
Illustration 1 g06487273
(1) 307-3245 Injector As
Illustration 2 g06487280
(1) 307-3245 Injector AsNew injector assembly (1) is adaptable to the products within the listed serial numbers and is effective with all products after the listed serial numbers.
New injector assembly (1) replaces the former 5T-5045 Lubrication Injector Gp in the 5T-5009 Lubrication Distribution Valve Gp and 8W-2597 Lubrication Distribution Valve Gp.
The former 5T-5009 Lubrication Distribution Valve Gp was replaced by 269-5348 Lubrication Distribution Valve Gp in the 542-2534 Automatic Lubrication Gp, 480-9286 Lubrication Lines Gp, and 461-6749 Automatic Lubrication Gp.
The former 8W-2597 Lubrication Distribution Valve Gp was replaced by 269-5352 Lubrication Distribution Valve Gp in the 480-9286 Lubrication Lines Gp.Note: The 442-3289 Lubrication Valve and Lines Gp is equipped with the 8W-2597 Lubrication Distribution Valve Gp.Note: The 442-3289 Lubrication Valve and Lines Gp was superseded by 449-2424 Fuel Filter.Note: The 499-2424 Lubrication Valve and Lines Gp is equipped with the 5T-5009 Lubrication Distribution Valve Gp.Note: The 499-2424 Lubrication Valve and Lines Gp was superseded by the 542-2354 Lubrication Valve and Lines Gp.