101607-9190 ZEXEL 9 400 615 750 BOSCH INJECTION-PUMP ASSEMBLY 9400615750 1016079190 16713z6410

Information Cross number Calibration Data Calibration Data Ex

Information injection-pump assembly

BOSCH 9 400 615 750 9400615750

ZEXEL 101607-9190 1016079190

NISSAN-DIESEL 16713Z6410 16713z6410

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101607-9190 zexel genuine, new aftermarket engine parts with delivery

Service parts 101607-9190 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101060-5040

3. GOVERNOR 105921-8110

4. SUPPLY PUMP

105220-7010

5. AUTOM. ADVANCE MECHANIS 105672-0270

6. COUPLING PLATE 105662-1370

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-6690

11. Nozzle and Holder 16600-Z5519

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4650

14. NOZZLE

105015-6380

15. NOZZLE SET

Include in #1:

101402-7892 as _

101607-9190 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 615 750 9400615750

ZEXEL 101607-9190 1016079190

NISSAN-DIESEL 16713Z6410 16713z6410

Zexel num

Bosch num

Firm num

Name

101607-9190

9 400 615 750

16713Z6410 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
FE6B * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-1520

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.4 3.35 3.45

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 12

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 74 72.4 75.6

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.5+-0.5

Pump speed r/min 275 275 275

Average injection quantity mm3/st. 10.4 8.6 12.2

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(12)

Pump speed r/min 800 800 800

Average injection quantity mm3/st. 74 73 75

Basic *

Fixing the lever *

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.05

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 85.5 81.5 89.5

Fixing the lever *

Injection quantity adjustment_05

Adjusting point I

Rack position -

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 80 80 90

Fixing the lever *

Rack limit *

Timer adjustment

Pump speed r/min -

Advance angle deg. 0.5

Remarks
Measure the actual speed.

Timer adjustment_02

Pump speed r/min -

Advance angle deg. 6.5 6.5 6.5

Remarks
Measure the actual speed, stop

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=G08
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=36mm
----------
a=26.5deg+-5deg b=36deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)

Information:

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.The table below contains the new fuel injector part numbers.Note: Use a 563-8152 Engine Oil Filter (High Efficiency) along with the new fuel injectors.
Table 1
Required Parts
Item Qty New Part Number Part Name
1 6 387-9426 Fuel Injector Gp
2 6 387-9428 Fuel Injector Gp
3 6 387-9429 Fuel Injector Gp
4 6 387-9430 Fuel Injector Gp
5 6 387-9432 Fuel Injector Gp
6 6 387-9434 Fuel Injector Gp
7 6 387-9436 Fuel Injector Gp
8 6 387-9437 Fuel Injector Gp
9 6 387-9438 Fuel Injector Gp
10 6 387-9439 Fuel Injector Gp
11 6 387-9440 Fuel Injector Gp
12 6 387-9441 Fuel Injector Gp
13 6 557-7627 Fuel Injector Gp
14 6 557-7633 Fuel Injector Gp
15 1 563-8152 Engine Oil Filter
16 6 573-4231 Fuel Injector Gp
17 6 573-4235 Fuel Injector Gp This change is effective with fuel injector serial number 3B142289137E.