101606-0430 ZEXEL 9 400 612 617 BOSCH INJECTION-PUMP ASSEMBLY 9400612617 1016060430 8976021420


 

Information injection-pump assembly

BOSCH 9 400 612 617 9400612617
ZEXEL 101606-0430 1016060430
ISUZU 8976021420 8976021420
101606-0430 INJECTION-PUMP ASSEMBLY
Rating:
42
Buy INJECTION-PUMP ASSEMBLY 101606-0430 zexel genuine, new aftermarket engine parts with delivery

Service parts 101606-0430 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101060-6571
3. GOVERNOR 105932-3700
4. SUPPLY PUMP 105230-1090
5. AUTOM. ADVANCE MECHANIS 105690-0223
6. COUPLING PLATE 105661-1170
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105110-7743
11. Nozzle and Holder 8-94391-291-4
12. Open Pre:MPa(Kqf/cm2) 16.2{165}/19.6{200}
13. NOZZLE-HOLDER 105041-2082
14. NOZZLE
15. NOZZLE SET 105019-2190

Include in #1:

101606-0430 as INJECTION-PUMP ASSEMBLY

Cross reference number

Zexel num
Bosch num
Firm num
Name
101606-0430 
101606-0480 
9 400 612 617 
8976021420  ISUZU
INJECTION-PUMP ASSEMBLY
6HL1-S K 14BN INJECTION PUMP ASSY PE




Information:

Burn Prevention
Do not touch any part of an operating engine. Allow the engine to cool before any repair or maintenance is performed on the engine.Relieve all pressure in air, oil, fuel or cooling systems before any lines, fittings or related items are disconnected or removed.Coolant
To prevent personal injury, do not step up on engine to remove the filler cap, if applicable. Use an adequate ladder.At operating temperature, the engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot water. When pressure is relieved rapidly, this hot water can turn into steam.Allow cooling system components to cool before draining. Any contact with hot water or steam can cause severe burns.Check the coolant level only after the engine has been stopped and the filler cap is cool enough to remove with your bare hand. Remove the cooling system filler cap slowly to relieve pressure.Cooling system supplemental additive contains alkali. To prevent personal injury, avoid contact with the skin and eyes and do not drink.Oils
Hot oil and components can cause personal injury. Do not allow hot oil or components to contact the skin.Batteries
Battery electrolyte contains acid and can cause injury. Avoid contact with the skin and eyes. Wash hands after touching batteries and connectors. Use of gloves is recommended. Always wear protective glasses when working with batteries.Batteries give off flammable fumes which can explode. Always thaw a frozen battery before jump starting. Frozen batteries can explode. Do not smoke when observing the battery electrolyte levels.Fire or Explosion Prevention
Determine whether the engine will be operated in an environment in which combustible gases could be drawn through the air inlet system. These gases could cause the engine to overspeed, which in turn could seriously damage the engine and result in bodily injury or property damage.If your application involves the presence of combustible gases, consult your Caterpillar dealer to obtain additional information concerning protection devices suitable for the application involved.Inhaling freon gas through a lit cigarette or other smoking method, or inhaling fumes released from a flame contacting freon could cause bodily harm or death. Do not smoke when servicing, charging or working around air conditioners or where freon gas may be present.All fuels, most lubricants and some coolant mixtures are flammable. Diesel fuel is flammable. Gasoline is flammable. The mixture of diesel and gasoline fumes are extremely explosive.Do not smoke while refueling or in a refueling area.Do not smoke in areas where batteries are charged, or where flammable materials are stored.Keep all fuels and lubricants stored in properly marked containers and away from all unauthorized persons.Store all oily rags or other flammable material in a protective container, in a safe place.Do not weld or flame cut on pipes or tubes that contain flammable fluids. Clean them thoroughly with nonflammable solvent before welding or flame cutting on them.Remove all flammable materials such as fuel, oil and other debris before they accumulate on the truck engine.Do not expose the engine to flames, burning brush, etc., if

Have questions with 101606-0430?





Group cross 101606-0430 ZEXEL

Isuzu 

9 400 615 417 
8976021380 
INJECTION-PUMP ASSEMBLY
6HL1-N
9 400 612 789 
8976021390 
INJECTION-PUMP ASSEMBLY
6HL1-N
9 400 615 418 
8976021400 
INJECTION-PUMP ASSEMBLY
6HL1-N
101606-0430  

101606-0480 
9 400 612 617 
8976021420 
INJECTION-PUMP ASSEMBLY
6HL1-S
9 400 612 618 
8976021430 
INJECTION-PUMP ASSEMBLY
6HL1-S
9 400 615 419 
8976021440 
INJECTION-PUMP ASSEMBLY
6HL1-S
9 400 612 661 
8976021450 
INJECTION-PUMP ASSEMBLY
6HL1-S
9 400 612 751 
8976021451 
INJECTION-PUMP ASSEMBLY
6HL1-S
9 400 612 619 
8976021460 
INJECTION-PUMP ASSEMBLY
6HL1-S
F 019 Z10 732 
8976023560 
INJECTION-PUMP ASSEMBLY
6HL1-S
9 400 613 293 
8976023561 
INJECTION-PUMP ASSEMBLY
6HL1-S
9 400 615 420 
8976023580 
INJECTION-PUMP ASSEMBLY
6HL1-S
Back to top