Information injection-pump assembly
ZEXEL
101605-0322
1016050322
ISUZU
1156034933
1156034933
Rating:
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Fuel Injection Pump 1-15603493-3 101062-8710 9400613292 Compatible For Isuzu 6BG1 6BG1T Engine
LPWREDGFD Part number:9400613292 || Application:Compatible For Isuzu 6BG1 6BG1T Engine
LPWREDGFD Part number:9400613292 || Application:Compatible For Isuzu 6BG1 6BG1T Engine
Fuel Injection Pump 1-15603493-3 For Isuzu Engine 6BG1 6BG1T
LPWREDGFD Part number:1-15603493-3 || Application:For Isuzu Engine 6BG1 6BG1T
LPWREDGFD Part number:1-15603493-3 || Application:For Isuzu Engine 6BG1 6BG1T
Cross reference number
Zexel num
Bosch num
Firm num
Name
101605-0322
1156034933 ISUZU
INJECTION-PUMP ASSEMBLY
6BG1TRB05
6BG1TRB05
Information:
1. Remove bolts (1) and remove the oil pump pick-up and discharge tubes. 2. Remove two bolts (2) and remove the oil pump. The following step is for the installation of the oil pump.3. Position the oil pump and install and torque two bolts (2).4. Position the pick-up and discharge tubes and install bolts (1).End By:a. install oil panDisassemble And Assemble Oil Pump
Start By:a. remove oil pump 1. If necessary, remove the idler gear.2. Remove bolt (1) and remove relief valve spring (2) with relief valve (3).4. Use tooling (A) and remove input gear (4).
Before removing the input shaft and gear from the pump housing, be sure no burrs are on the input shaft. Burrs on the shaft may scratch and damage the pump housing.
5. Remove bolts (5) and separate the pump housing. Remove input shaft and gear (6) from the pump housing. Remove the driven gear from the housing. The following steps are for the assembly of the oil pump. Before pressing input gear (4) onto input shaft (6) be sure to install bolt (5), that is positioned under the input gear.6. Position input gear and shaft (6) in the pump housing. Press input gear (4) onto the input shaft until it is flush with the end of the shaft. Position the driven gear in the housing.7. Position the pump housings together. Install bolts (5). Install the idler gear if it was removed.8. Position relief valve spring (2), relief valve (3) and install bolt (1).End By:a. install oil pump
Start By:a. remove oil pump 1. If necessary, remove the idler gear.2. Remove bolt (1) and remove relief valve spring (2) with relief valve (3).4. Use tooling (A) and remove input gear (4).
Before removing the input shaft and gear from the pump housing, be sure no burrs are on the input shaft. Burrs on the shaft may scratch and damage the pump housing.
5. Remove bolts (5) and separate the pump housing. Remove input shaft and gear (6) from the pump housing. Remove the driven gear from the housing. The following steps are for the assembly of the oil pump. Before pressing input gear (4) onto input shaft (6) be sure to install bolt (5), that is positioned under the input gear.6. Position input gear and shaft (6) in the pump housing. Press input gear (4) onto the input shaft until it is flush with the end of the shaft. Position the driven gear in the housing.7. Position the pump housings together. Install bolts (5). Install the idler gear if it was removed.8. Position relief valve spring (2), relief valve (3) and install bolt (1).End By:a. install oil pump
Have questions with 101605-0322?
Group cross 101605-0322 ZEXEL
Isuzu
101605-0322
1156034933
INJECTION-PUMP ASSEMBLY
6BG1TRB05
6BG1TRB05