101605-0230 ZEXEL 9 400 613 369 BOSCH INJECTION-PUMP ASSEMBLY 9400613369 1016050230 1156034610

Information injection-pump assembly

BOSCH 9 400 613 369 9400613369

ZEXEL 101605-0230 1016050230

ISUZU 1156034610 1156034610

Price: query

Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101605-0230 zexel genuine, new aftermarket engine parts with delivery

Service parts 101605-0230 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101062-8540

3. GOVERNOR 105419-4930

4. SUPPLY PUMP 105220-7580

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE 156638-4520

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105110-8280

11. Nozzle and Holder 1-15300-425-0

12. Open Pre:MPa(Kqf/cm2) 14.7{150}/22.1{225}

13. NOZZLE-HOLDER 105041-4410

14. NOZZLE

15. NOZZLE SET 105019-2820

Include in #1:

101605-0230 as INJECTION-PUMP ASSEMBLY

Include in #2:

104741-5990 as _

Cross reference number

Zexel num

Bosch num

Firm num

Name

101605-0230

9 400 613 369

1156034610 ISUZU

INJECTION-PUMP ASSEMBLY
6BG1 * K

Information:

(1) Body assembly. Install piston with "FRONT" toward front of engine. Assemble so the markings "FRONT" on the piston body assembly and the forging part number on the connecting rod assembly point in opposite directions. Install connecting rod and piston group with rod forging part number to the rear of the engine. The rear of the engine is the flywheel end. Thoroughly lubricate the piston group with clean engine oil just before inserting into block group.(2) Connecting rod.Top And Intermediate Ring
Install piston ring with "UP" side toward top of piston.(3) Top Ring has the mark "UP-1". Clearance between ends of piston ring when installed in a cylinder with a bore size of 105.025 mm (4.1348 in) ... 0.525 0.125 mm (.021 .005 in)Increase in clearance between ends of piston ring for each 0.03 mm (.001 in) increase in cylinder bore size ... 0.09 mm (.004 in)(4) Intermediate Ring has the